k330 unlock error [Archive]

mohamedrimas

08-13-2009, 12:07

Unlock and Repair----------------------------------------------------------
User selected phone K330 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
3) Press "Power On" button shortly.
Booting ...
IMEI : 35179603194176
Version : R5A036
CXC : CXC1250616
Sending loader ...
Hint : Now the probe might be disconnected
Error : Unknown Flash [00EC 0000 0000 0000]
[CFI Flash Chip Information]
JEDEC ID - 02EC ( 00EC-3002 )
PRI Command Set - 0200 ( Unknown )
PRI Ext. Offset - 010A
ALT Command Set - 0000 ( No Interface Specified )
ALT Ext. Offset - 0000
Minimum Vcc - 1.7 V
Maximum Vcc - 2.0 V
Minimum Vpp - 8.5 V
Maximum Vpp - 9.5 V
Typical Byte / Word Write Timeout - 64 mcs
Typical Full Buffer Write Timeout - 2048 mcs
Typical Block Erase Timeout - 1024 ms
Typical Chip Erase Timeout - not supported
Maximum Byte / Word Write Timeout - 256 mcs
Maximum Full Buffer Write Timeout - 8192 mcs
Maximum Block Erase Timeout - 4096 ms
Maximum Chip Erase Timeout - not supported
Device Size - 2000000 (HEX) byte(s)
Bus Interface - 0001 ( x16-only async. )
Maximum Multi-byte Write - 400 (HEX) byte(s)
Number of Erase Regions - 01
1) 0080 blocks of 040000 bytes
Error : #2.00F104D0
Error : #2.003F0014
Error : #2.003D0580
Error : #2.003D0270
Error : Failed.

mk_17

08-13-2009, 13:02

you should keep press power and try again yesterday i face same problem and every thing ok and unlocked done

thx dreambox team

akkay

08-13-2009, 13:31

can somebody else show log to show confirmation?

pyjaman

08-13-2009, 16:03

how to press on and we must remove keypad for unlock, please explain ...

-- Unlock and Repair----------------------------------------------------------
User selected phone K330 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
3) Press "Power On" button shortly.
Booting ...
IMEI : 35179603133938
Version : R5A036
CXC : CXC1250616
Sending loader ...
Hint : Now the probe might be disconnected
Error : Unknown Flash [00EC 0000 0000 0000]
[CFI Flash Chip Information]
JEDEC ID - 02EC ( 00EC-3002 )
PRI Command Set - 0200 ( Unknown )
PRI Ext. Offset - 010A
ALT Command Set - 0000 ( No Interface Specified )
ALT Ext. Offset - 0000
Minimum Vcc - 1.7 V
Maximum Vcc - 2.0 V
Minimum Vpp - 8.5 V
Maximum Vpp - 9.5 V
Typical Byte / Word Write Timeout - 64 mcs
Typical Full Buffer Write Timeout - 2048 mcs
Typical Block Erase Timeout - 1024 ms
Typical Chip Erase Timeout - not supported
Maximum Byte / Word Write Timeout - 256 mcs
Maximum Full Buffer Write Timeout - 8192 mcs
Maximum Block Erase Timeout - 4096 ms
Maximum Chip Erase Timeout - not supported
Device Size - 2000000 (HEX) byte(s)
Bus Interface - 0001 ( x16-only async. )
Maximum Multi-byte Write - 400 (HEX) byte(s)
Number of Erase Regions - 01
1) 0080 blocks of 040000 bytes
Error : #2.00F104D0
Error : #2.003F0014
Error : #2.003D0580
Error : #2.003D0270
Error : Failed.

GSM Dream

08-13-2009, 16:14

Hello!
Thank you for report!
We'll fix this issue ASAP.

pyjaman

08-13-2009, 16:28

thank you, wait for update :)

mk_17

08-13-2009, 17:23

i unlock k330 without test point i used locosto rom bug that's it

MOBICOM

08-14-2009, 12:35

same problem here ;)

-- Unlock and Repair----------------------------------------------------------
User selected phone K330 using Test Point boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
3) Press "Power On" button shortly.
Booting ...
IMEI : 35179603194038
Version : R5A036
CXC : CXC1250616
Sending loader ...
Hint : Now the probe might be disconnected
Error : Unknown Flash [00EC 0000 0000 0000]
[CFI Flash Chip Information]
JEDEC ID - 02EC ( 00EC-3002 )
PRI Command Set - 0200 ( Unknown )
PRI Ext. Offset - 010A
ALT Command Set - 0000 ( No Interface Specified )
ALT Ext. Offset - 0000
Minimum Vcc - 1.7 V
Maximum Vcc - 2.0 V
Minimum Vpp - 8.5 V
Maximum Vpp - 9.5 V
Typical Byte / Word Write Timeout - 64 mcs
Typical Full Buffer Write Timeout - 2048 mcs
Typical Block Erase Timeout - 1024 ms
Typical Chip Erase Timeout - not supported
Maximum Byte / Word Write Timeout - 256 mcs
Maximum Full Buffer Write Timeout - 8192 mcs
Maximum Block Erase Timeout - 4096 ms
Maximum Chip Erase Timeout - not supported
Device Size - 2000000 (HEX) byte(s)
Bus Interface - 0001 ( x16-only async. )
Maximum Multi-byte Write - 400 (HEX) byte(s)
Number of Erase Regions - 01
1) 0080 blocks of 040000 bytes
Error : #2.00F104D0
Error : #2.003F0014
Error : #2.003D0580
Error : #2.003D0270
Error : Failed.

[ASD]

08-14-2009, 18:26

Try to use latest beta version. A lot of bugs fixed and new phones added...

MOBICOM

08-14-2009, 18:32

;4748645']Try to use latest beta version. A lot of bugs fixed and new phones added...

huh, I already unlock this k330 by cruiser
Maybe @mohamedrimas can try this beta update if hi stil have phone

pyjaman

08-15-2009, 10:29

same error with new beta :(

--- Unlock by Patch -----------------------------------------------------------
User selected phone K330 using Test Point boot mode
1) Turn OFF the phone.
2) Reconnect phone battery or connect power hook.
3) Connect the phone to DreamBox cable.
4) If booting does not start, reconnect phone cable.
Booting ...
IMEI : 35179603133938
Version : R5A036
CXC : CXC1250616
Sending loader ...
Hint : Now the probe might be disconnected
Error : Unknown Flash [00EC 0000 0000 0000]
[CFI Flash Chip Information]
JEDEC ID - 02EC ( 00EC-3002 )
PRI Command Set - 0200 ( Unknown )
PRI Ext. Offset - 010A
ALT Command Set - 0000 ( No Interface Specified )
ALT Ext. Offset - 0000
Minimum Vcc - 1.7 V
Maximum Vcc - 2.0 V
Minimum Vpp - 8.5 V
Maximum Vpp - 9.5 V
Typical Byte / Word Write Timeout - 64 mcs
Typical Full Buffer Write Timeout - 2048 mcs
Typical Block Erase Timeout - 1024 ms
Typical Chip Erase Timeout - not supported
Maximum Byte / Word Write Timeout - 256 mcs
Maximum Full Buffer Write Timeout - 8192 mcs
Maximum Block Erase Timeout - 4096 ms
Maximum Chip Erase Timeout - not supported
Device Size - 2000000 (HEX) byte(s)
Bus Interface - 0001 ( x16-only async. )
Maximum Multi-byte Write - 400 (HEX) byte(s)
Number of Erase Regions - 01
1) 0080 blocks of 040000 bytes
Error : #2.00F104D2
Error : #2.003F0014
Error : #2.003D05D4
Error : #2.003D0273
Error : Failed.

goanga

08-16-2009, 14:58

ersion : R5A036
CXC : CXC1250616
Sending loader ...
Hint : Now the probe might be disconnected
Error : Unknown Flash [00EC 0000 0000 0000]
[CFI Flash Chip Information]
JEDEC ID - 02EC ( 00EC-3002 )
PRI Command Set - 0200 ( Unknown )
PRI Ext. Offset - 010A
ALT Command Set - 0000 ( No Interface Specified )
ALT Ext. Offset - 0000
Minimum Vcc - 1.7 V
Maximum Vcc - 2.0 V
Minimum Vpp - 8.5 V
Maximum Vpp - 9.5 V
Typical Byte / Word Write Timeout - 64 mcs
Typical Full Buffer Write Timeout - 2048 mcs
Typical Block Erase Timeout - 1024 ms
Typical Chip Erase Timeout - not supported
Maximum Byte / Word Write Timeout - 256 mcs
Maximum Full Buffer Write Timeout - 8192 mcs
Maximum Block Erase Timeout - 4096 ms
Maximum Chip Erase Timeout - not supported
Device Size - 2000000 (HEX) byte(s)
Bus Interface - 0001 ( x16-only async. )
Maximum Multi-byte Write - 400 (HEX) byte(s)
Number of Erase Regions - 01
1) 0080 blocks of 040000 bytes
Error : #2.00F104D0
Error : #2.003F0014
Error : #2.003D0580
Error : #2.003D0270
Error : Failed.

tested on 20 pcs same problem waiting for bug fix ASAP

wzupfones

08-16-2009, 21:24

BRO try useing test point ( TP ) PROCESS it will work fine ok

goanga

08-17-2009, 01:16

i used TEST POINT right unlocked with succes t303 unlocked with succes t280 , not working for k330