View Full Version : How to unlock GX-1?
Burnt Cobba
04-14-2003, 11:51
thanks
al
djozeamma
04-14-2003, 12:03
Hellooo
You mean GX-10 sharp
If it's the case see here :
http://www.unlocking.net
DJOZEAMMA
Will the Sharp GX-10 software by unlocking.net also work on Sharp GX-1 to unlock it?
If not can anyone recommend or e-mail me the correct software
Thanking you in advance
Burnt Cobba
04-14-2003, 13:34
@ djozeamma
no GX-1 not GX-10. It is quite differnt from Gx-10 but also with a camera.
al
Sharp GX-10 unlock solution
With Sim Card (of locked network) in phone:
*01763*6371# and press M.
In menu go to: SETTINGS->SELECT->SECURITY
then in Security menu:MEP LOCKS->SELECT
insert default security code 0000
In menu go to NETWORK and choose DEACTIVATE
press SELECT and insert 812664697614
Press OK, phone anwser will be: DONE .
phone unlocked
Blartiartfast
04-14-2003, 16:34
O dear! This solution AGAIN. Thes codes given, will only unlock the phone they were calculated for. They will not unlock any other GX10, or GX1. However the free software by unlocking works perfectly on GX10's. Don't try it on your GX1. It could be bad.
mobilephonesgro
04-14-2003, 19:06
Does anyone have the unlock solution for GX1?
Pls post it here.
Sorry, our Software does not support GX-1.
Regards,
Jan Farrell
sorry 2put this up here J!@janfarrell does your london branch have gx10 cables or NOT? coz I ordered/paid cash(9th April) &still not rcvd goods:(
@hakika
Yes, London office does now have stock, apparently there was some delay involving customs, your goods should be shipped shortly!
Sorry for the delay.
Regards,
Jan Farrell
just wonder is it possible to unlock sharp gx1 in he future?if not i would give up to hold this phone any more.
@ Jan
does this soft of urs work on assembled cables ?
i dont have a cable can i make one ?
regards:(
Sorry Peter, currently you would have to buy either an original Sharp cable, or a manufactured one such as ours.
@J & Janfarrell thanx for apologies -hope 2 receive goods 2moro:)
mobilephonesgro
04-15-2003, 21:45
Sorry everyone but the original request was:
Does anyone have the unlock solution for GX1?
Pls post it here. Thanks
http://gsm-gsm.pisem.net/sharp.html
above website is the solution for unlocking gx1.
***********************************************
*************SALES ONLY ON SALES SECTION*********
**************MODIFY BY Wahab (DrMObile)**********
***********************************************
mtony969
04-16-2003, 10:05
my clip opens gx1 and gx10
GO TO www.worldtech-solutions .com
or email me i will sell you one
Burnt Cobba
04-16-2003, 10:24
is there some log solution?
i only have 1 to do and dont need clip or software since certainly i wont get any more of this model. Infact i got this months ago.
GX-10 is more popular than the GX-1.
thanks
al
I think people here were asking about alternative solution to unlocking the Sharp GX1 phone not to be sold clips or software.
Sales ads belong in sales section were people searching for clips or software to buy can find them.
Someone here must have a solution to unlocking this very unpopular model?
Fre3 Crack3r
04-16-2003, 11:59
Hello @LL
I have stock about CLIPS unlocking SHARP GX-1
Best price contacte me .
Genie|eineG
04-16-2003, 12:12
Originally posted by syed
Sharp GX-10 unlock solution
With Sim Card (of locked network) in phone:
*01763*6371# and press M.
In menu go to: SETTINGS->SELECT->SECURITY
then in Security menu:MEP LOCKS->SELECT
insert default security code 0000
In menu go to NETWORK and choose DEACTIVATE
press SELECT and insert 812664697614
Press OK, phone anwser will be: DONE .
phone unlocked
so does this code work for a gx-1 http://www.telefonino.net/news/images/6411_01.jpg
this one not the flip one
Genie
Burnt Cobba
04-16-2003, 15:04
pls stop posting this solution!
it has already been emphasized more than once that this solution is just for one phone (GX-10) only and not in general!!!
al
bzpsmachine
04-16-2003, 22:51
Yes I have used unlocking free soft to unlock a GX1 unlocks the same as the GX 10, BUT it did take 2 go's so if it does not go first time try again. I use genuine Sharp cable if that makes any difference:)
Burnt Cobba
04-16-2003, 23:16
what???
used the same software as that for GX10????
let me know pls
al
bzpsmachine
04-16-2003, 23:18
Yes, just treat it the same as GX10 do you have the free unlocking soft?
Now were getting some where. Please can anyone else confirm or test the use of GX-10 software to unlock GX-1 then post results here
Burnt Cobba
04-17-2003, 02:20
very strange. As far as i know it will work only on GX-10.
Who else tested it?
I dont have the working pinouts for these ones.
thanks
al
OH my *** is that TURE!!!!!!! USING SAME SOFTWARE!!!!!!!
bzpsmachine
04-17-2003, 21:23
Come on guys someone out there besides me will take a chance and try it to back up my claim! Failing that if any one knows Chris at Phone Acc. mail him to see if what I say is genuine:cool:
buttmunch
04-28-2003, 20:18
hi guys
im dying pls help me!!!!!! i live in cyprus and it s kinda hard to go to a vodafone and get my gx10 unlocked. can anybody help me . i tried phoning vodafone in uk but it has been 2 weeks since and they still didnt call with unlock code!!!!!!! cant even find data cable to unlock cos my gx 10 is the only one in cyprus. can anyone help pls im desperate!!!
mobileclinic
04-30-2003, 08:10
Hi buttmunch,
You can download 100% working pinout & software from my group-
http://groups.yahoo.com/group/mobileclinic2001/
You can make your own cable using panasonic g450 connector.
Regards.
Mobileclinic
Yes, i unlocked 2 GX1 phones with the free software, is working pefectly, so feel secure to use the GX10 unlocker for GX1 phones, is working 100%.
The software and instruction to make your own cable you can find them HERE (http://users.pandora.be/fludor/Uploads/Sharp/)
Regards
Fludor
i have also unlocked a number of phones with free software on
www.unlocking.net site working 100% for me!
mobilephonesgro
04-30-2003, 13:52
Thanks everyone for the info. Now let's get to work and unlock the GX 1!!!
Burnt Cobba
04-30-2003, 19:56
thanks for the useful help mates
br
al
mtony969
05-01-2003, 09:12
Yes my gx10 clip unlocks gx1 after a couple of trys i have a
spare Clip was made from gx10 soft so i dont see a reason
why that does not work we have unlocked 4 of these phones
Hi buttmunch
From Monday if you didnt unlock youar phone yet, i can unlockit for you.I am from Cyprus
I can confirm to you that after some hesitation, I unlocked GX-1 with the free software and cable and everything went very smoothly 1000%
Hi
I have the original vadaphone cable and i tryit to unlock my GX-10
with the two free unlocking software, but no luck.with the unlocking.net soft i take always (something wrong try again),and with completeGSM soft always (changing to BACKUP MODE) and nothing happend.
Anyone know what going wrong?
Thanks
My cable model is:XN-1DC10
Burnt Cobba
05-05-2003, 00:56
@essojay
what cable did u use pls mate? if possibel got its schema?
thanks mate
al
clearall
05-05-2003, 05:37
the problem is that there is only one pin out correct. and the pin outs that were in the net are all fake.
clearall
05-05-2003, 05:41
the cable you can make from a cable for panasonic 450.
i have the solution for the GX1 but it's a clip working 100%
the sharp gx10 clip i have does the gx1 to
mzkahack29
07-12-2004, 20:13
the solution is this software Sharp_Unlocker_30
from ****** web site i unlocked 2 phones gx1 " o2 operator "with this software
you should selct gx10 and conect your mobile and after aplicar selecion ...
and your mobile is unlocked ....
good luck