HWK Release 18/08/2009

[Odia The Ultimate]

Release Date: 26/07/2005

The Official release of UFS Suite Setup v1.00.000 will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

Please note, it would be best to un-install ALL previous versions of UFS software.

There is no need to remove existing USB drivers they will work ok with UFS Suite.

This Suite includes the following new software since the last UFS release:-

UFS_KZF v1.8_b (HWK Required)
-------------------------------

First Official release, please make sure you make a read of any phone before using this software, this will help us to debug any errors and also ensure your phone can be restored.


UFS_SAMs v1.4_s
-----------------

TRIDENT - C210,C230 Sharp Flash chip error fixed.


Many thanks to all those who have supported us!!!

Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)

[Odia The Ultimate]

Release Date: 05/09/2005

The Official release of UFS Suite Setup v2.00.000 will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

Please note, it would be best to un-install ALL previous versions of UFS software.

There is no need to remove existing USB drivers they will work ok with UFS Suite.

Individual Installers are also available for the seperate modules for users who prefer this.

This Suite includes the following new software since the last UFS release:-

UFS_ACER v2.2_c
-----------------

1. Minor Bug Fixes and changes to bring inline with other modules.


UFS_ATRz v1.6_j
----------------

1. Minor bugs fixed.
2. Added Init SecBlk for J200


UFS_DCTx v1.3_l
----------------

1. New products: RH-64,RH-70,RH-75,RM-74,RM-75,RM-104.
2. Added support for new Samsung flash chips.


UFS_DCTxBB5 v1.4_a (HWK Required)
-----------------------------------

v1.4_a
--------
1. BB5 Flashing Added for: RM-1, RM-36, RM-42, RM-57, RM-58 and RM-84.
2. BB5 Read / Write PM.
3. BB5 PM Edit.
4. BB5 Read / Write PP.
5. BB5 UI Options.
6. New products: RH-64,RH-70,RH-75,RM-74,RM-75,RM-104.
7. Added support for new Samsung flash chips.
8. Other features as DCTx.


UFS_KZF v1.8_c (HWK Required)
-------------------------------
1. Added support for new ST flash chips.
2. Added Test Point Support. (TP = GDFS Functions, TP1 = All Functions)
3. K608 CID37 unlock via TP.
4. LG U8330 and U8380 unlock via downgrade using TP.
5. Major and Minor bugs fixed.


UFS_RTP v2.6_j
---------------

1. Minor bugs fixed.


UFS_SAMs v1.4_t - Beta
------------------------

1. TRIDENT
1. E530,E620,E728 added.
2. Individual BaudRate storage for each model in INI file.

2. SWIFT
1. E340,E350,E640,E648,E730,E738 added for HWK customers.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)

[Odia The Ultimate]

Release Date: 16/09/2005

The Official release of UFS Suite Setup v2.01.000 will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

Please note, this software will update v2.00.000 without uninstall.

Individual Installers are also available for the seperate modules for users who prefer this.

This Suite includes the following new software since the last UFS release:-

NEW HWK SOFTWARE MODULE ALERT!!! - It gives me GREAT pleasure to release to you this new module for HWK customers to assure you our continued development.

UFS_LG_GSM v1.0_a Beta (HWK Required)
-----------------------------------------

1. Initial Public Release


UFS_DCTx v1.3_m
------------------

1. New ST flash chip M36L0R7040 (6030 problem).
2. Erase files flashing fixed.
3. MM Partition recreation for RM13,RM14,RM72,RM73.


UFS_DCTxBB5 v1.4_b (HWK Required)
------------------------------------

1. New ST flash chip M36L0R7040 (6030 problem).
2. Erase files flashing fixed.
3. MM Partition recreation for RM13,RM14,RM72,RM73.


UFS_KZF v1.8_d (HWK Required)
-------------------------------

1. Major and Minor bugs fixed.
2. Z1010 unlock problem fixed.
3. Fixed Recovery problem, path not found.


UFS_SAMs v1.4_u - Beta
------------------------

1. Minor bugs fixed.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)

[Odia The Ultimate]

Release Date: 23/11/2005

Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

Please note, we will now release the software as seperate installers, we hope this will allow us to make releases more often, without the need to wait for all modules to be updated.


UFS_LG_GSM v1.0_b Beta (HWK Required)
-----------------------------------------

1. Extended the supported model list.

UFS_DCTxBB5 v1.4_c
------------------

DCTx has now been dropped both HWK and none HWK use same version.

1. New products: RH-33, RH-73, RH-74, RM-82 (7200b,6060,6061,6111)
2. Corrected unlock problem for: RH-64, RH-70, RH-75.
3. Patcher for DCT4 ASIC2 products (for HWK , use only *.pat files)
4. Auto Selection of 64k and 128k CNT FAT Images.


UFS_SAMs v1.4_v - Beta
------------------------

1. TRIDENT
1. X140 added.
2. NAND Erase (E530,E720,E728) to fix "Blinking LCD"
3. Read Flash - custom address range support.

2. OM6359
1. X620 added.

3. SWIFT
1. D600 support added for HWK customers.


UFS_ATRz v1.6_k - Beta
------------------------

1. Added support for J210


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)

[Odia The Ultimate]

Release Date: 29/12/2005

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

Please note, it would be best to un-install ALL previous versions of UFS software.

This release contains a new set of USB drivers, you are advised to use these drivers for more stable use.

UFS_ACER v2.2_d
-----------------

1. API updated for new USB drivers.


UFS_ATRz v1.6_l
----------------

1. API updated for new USB drivers.


UFS_DCTxBB5 v1.4_d
--------------------

1. New BB5 GSM products: RM-38,RM-56 (3250,6270) introduced.
2. Converter from 64K to 128Kb Paged CNT Files.
3. New products: RM-111,RM-127 (7380,7360)
4. PPM and CNT FILE_MM_TYPE report added (to handle a 6230i, new HWID phones)


UFS_KZF v1.8_e (HWK Required)
-------------------------------

1. Major and Minor bugs fixed.
2. Z1010 unlock problem fixed.
3. Fixed Recovery problem, path not found.


UFS_LG_GSM v1.0_c Beta (HWK Required)
----------------------------------------

1. Minor Bugs Fixed.
2. New products added.


UFS_RTP v2.6_k
---------------

1. API updated for new USB drivers.


UFS_SAMs v1.4_w
------------------

TRIDENT
E568,S410i,X150,X200,X208 added.
BT Address Change.
OM635x
E108,E330N,E335,X495,X497,X628 added.
SWIFT
D500E,D600E,D608,E340E,E348,E350E,E358 added.
M46
Models revised.


UFS Suite v2.02 is available for anyone who wishes to use it.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)

[Odia The Ultimate]

Release Date: 10/03/2006

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com).


UFS_DCTxBB5 v1.4_e
--------------------

1. New BB5 GSM product: RM-70 (7370) introduced.
2. FIA 5.51.007


UFS_SAMs v1.4_x
------------------

TRIDENT
D720,D730,X660,X668,X800,X808 added.
OM635x
X490 added.
SWIFT
X700 added.

Please Note: D720 / D730 PDA Flash is also supported by a third party utility, check the start menu after install.

The Symbian USB Drivers are installed to:-

\Program Files\SarasSoft\UFS\UFS_SAMs\SymbianUSBDown_D720_7 30\ or your localised path for none english windows.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)

[Odia The Ultimate]

Release Date: 30/05/2006

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com).


Please run the upgrade client after you have installed the software, follow the instructions careful as you may need to run the update client more than once.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.



UFS_ATRz v2.0.0
-----------------

1. Added support for J220,J230,Z300.


UFS_DCTxBB5 v2.0.0
--------------------

1. New BB5 GSM products:
RM-49,RM-78,RM-79,RM91,RM92,RM-115,RM-126
(E60,6280,6282,N80-5,N80,6131/6133,6126/6133b) introduced.
2. New DCT4 products:
RH65,RH69,RH86,RH87,RH92,RH93,RM9,RM33,RM83,RM161, RM162,
RM166,RM167,RM189
(1600b,1110b,2610,2610b,1112b,1112,7270b,8801,6112 ,6103,6102i,
6070,6070b,2310)
3. Fixed PM_Edit, to show BB5 security code.
4. North America BB5 product: RM-99 (N70-5) introduced.
5. Fixed RM-38 (3250) flashing.
6. CDMA products RH-66,RM-97 (2115i,2116,2116i,2255) introduced.


UFS_LG_GSM v2.0.0
-------------------

1. Automatic MOT to BIF conversion.
2. New products added.
3. Fixed T5100 flashing.


UFS_SAMs v2.0.0
-----------------


TRIDENT
C120,C128,D520,D528,D800,D808,E770,E880,P300,P308,
X300,X308 added.
Read Flash - custom address range save fixed.
OM635x
X490,X495,X497 TFS flashing fixed.
SWIFT
D820,D828 flashing added.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk)

[Odia The Ultimate]

Release Date: 30/06/2006

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

LG KG800 cable schema is included with the installer, check Start Menu\Programs\SarasSoft\UFS\Documents.


UFS_ATRz v2.0.1
-----------------

1. Fixed "Wait..." bug for J200,J210,Z200.


UFS_DCTxBB5 v2.0.1
--------------------

1. Corrections to handle 64->128 conversion for new softwares.
2. New flash chips supported (Amd,Spansion,Intel,ST)
3. Bugs in PM_Edit fixed.
4. 64->128 conversion for BB5 phones.
5. New BB5 GSM products: RM10,RM24,RM89,RM180 (E70-1,E70-2,E61-1,N72-5)


UFS_LG_GSM v2.0.1
-------------------

1. New products added (S5200,KG800,..)
2. New flash chips support added.
3. Multiregion files fixed for ADI.
4. Fixed read bug ("not Defined Region")


UFS_SAMs v2.0.1
-----------------

TRIDENT
S400i added (Unlock works with battery only)
SWIFT
E360,E368 added.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 23/09/2006

The Official release is ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

New cable schema's are included with the installer, check Start Menu\Programs\SarasSoft\UFS\Documents.


UFS_DCTxBB5 v2.0.2
--------------------

1. New BB5 products:
RM67,RM86,RM87,RM106,RM112,RM123,RM132,RM133,RM145 ,RM199,RM200
(N71-1,6136,5500d,5500,N71-5,6233,N73-5,N73-1,6234,6136b,6151) introduced.
2. New DCT4 ASIC support added.
3. New DCT4 products RH86,RM165 (2610,8800 Sirocco)
4. Fixed VPP control.
5. Fixed support of new Flash update packs. (Flash Pack v6.32.029 included.)
6. Fixed minor bugs.


UFS_LG_GSM v2.0.2
-------------------

1. Sharp Gsm products added: GX20,GX30,GX30i,TM100,TM150,TM200


UFS_SAMs v2.0.2
-----------------

COMMON
Introduced E2P Read/Write. Allows easy backup/edit E2P
areas to repair or rebuild CAL data for new models.(Locks etc...)

TRIDENT
C130,E900,E908,S500i,X210,X218,X500,X508,X630,X638 ,X820,
X828 added (Unlock works with battery only)
CTS flashing (E900,E908,X630,X638,X820,X828)

SWIFT
D900,D908,X670,X678 added.
Corrected problems with TFS read.
NOR Erase.
Direct unlock for older models.

OM635x
X650,X658 added.
NOR Erase.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 18/10/2006

The Official release is ready, please download from:-
http://rapidshare.de/files/37194113/UFS_Suite_Setup_v03.03.000.exe.html

New cable schema's are included with the installer, check Start Menu\Programs\SarasSoft\UFS\Documents.


UFS_DCTxBB5 v2.0.3
--------------------

1. New Flash update bundle support (6.35.036)
2. Fixed bug in MM_Erase for TIKU models RM-165 (8800d)
3. Improved path search routines.


UFS_LG_GSM v2.0.3
-------------------

1. KG210,KG220,KG221,KG225,KG240,KG245 support added.


UFS_SAMs v2.0.3
-----------------

TRIDENT
I300,I308,I320,X680,X688 added.
CTS flashing (D520,D528,X680,X688)

SWIFT
E370,E378,E380,E388 added.
Introduced Unlock E2P for MSL phones (D900,D820,E370,...)
Read E2P shows info (IMEI, Lock Status, Unlock Codes)

Please Note: I300 / I320 PDA Flash is also supported by a third party utility, check the start menu after install.

The Drivers are installed to:-

\Program Files\SarasSoft\UFS\UFS_SAMs\PDAFLASH_I3xx\Driver\ or your localised path for none english windows.

Since the installer has changed a lot there is no update mode again this release, please see here for further details:-

http://forum.gsmhosting.com/vbb/showthread.php?t=338782


Many thanks to all those who have supported us!!!

Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk)

[Odia The Ultimate]

Release Date: 27/01/2007

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

You can download from here, until the support site can be updated:-

http://rapidshare.com/files/13561888/UFS_Suite_Setup_v03.04.000.exe.html

Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.4
--------------------

1. New BB5 products:
RM43R,RM100,RM140,RM146,RM147,RM158R,RM174,RM181,R M209,RM291
(N91-2,N92-1,7390,5300,5300b,N91-6,5200,5200b,7373,2626) introduced.
2. RM170,RM171(E50-1,E50-2) fixed.
3. New Flash update bundle support (6.44.047)


UFS_LG_GSM v2.0.4
-------------------

1. M4410 support added.
2. UI functions added for LG models.
3. Added BIF->MOT, BIN->MOT conversion.


UFS_SAMs v2.0.4
-----------------

TRIDENT
C300,D830,D836,D838,D840,D848,E570,E906,S401i,X156 ,X160,
X160b,X168,X461,X481,X510,X518,X520,X530,X680N,X81 0,X818,
X830 added (Unlock works with battery only !)
SWIFT
E250,E258,E500,E780,E786,E788 added.
Direct unlock for new models (D900,D820...)
OM635x
E420,E428 added.
X65x - Unlock E2P feature added.
S50x - Fixed "Full" flashing bug, E2P R/W added.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 14/02/2007

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

You can download from here, until the support site can be updated:-

http://rapidshare.com/files/16361034/UFS_Suite_Setup_v03.04.001.exe.html

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION

This installer contains a new Update Client (v2.0.4.1) which will fix a "-3" issue which some users have had, this was caused by having a HWK firmware version less than A1.04, e.g. was not upgraded with previous client.


DCTxBB5 v2.0.4.1
-----------------

1. New BB5 products:
RM198,RM216 (6085,6131NFC)
2. Firmware Downgrade option for BB5 phones.
3. Fixed APE bug in COR files flashing.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 03/03/2007

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).

You can download from here, until the support site can be updated:-

http://rapidshare.com/files/19132040/UFS_Suite_Setup_v03.04.002.exe.html

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 or V3.0.4.1, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION

This installer contains a new Update Client (v2.0.4.2) which will fix a "1112 exception error" which some users have had. There is no need to perform the server part within the client to fix the 1112 error, e.g. Next, Wait..., Quit is enough.


DCTxBB5 v2.0.4.2
-----------------

1. New BB5 products:
RM217,RM222 (6300,6300b)
2. PM Write: cofirmation to overwrite security data (21,120,208,308)


SAMs v2.0.4.2
--------------
COMMON
Cables description added.
TRIDENT
MVN CTS flashing fixed (X830 'Unknown File System' error)
FDI CTS flashing fixed (E570,X630,X680 Empty folders)
Full Reset (*2767*3855#) is mandatory after CTS flashing !
X838 added.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 30/04/2007

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com).
You can download from here, until the support site can be updated:-

http://rapidshare.com/files/28797734/HWK_Suite_Setup_v2.0.5.exe.html

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


DCTxBB5 v2.0.5.0
-----------------
1. New BB5 products: RM-101,RM-188,RM-208,RM-260 (N92-2,6086,E65-1,6086b)
2. New DCT4 products: RH-94,RH-95,RH-97,RH-98,RM-225.RM-229
(1112,1112i,6060v,6061,6030b,6030)
3. New CDMA products: RH-71,RH-77,RH-89,RM-121(2125,2126i,2118,2115i,2355)
4. New CDMA TIKU products:
RM-41,RM59,RM-60,RM61,RM-66,RM-124,RM-125,RM-154,RM-193
(3155,3155i,6155,6235,6236i,3152,6265,6265i,2855,6 165,6275,2865)
5. Support of new Flash update pack 7.4.13.26017, new Flash chips added.
6. Improved F-Bus polling, fixed "Bad Resp UFSx" after fatal error.
7. Improved diagnostics of "Dead APE" and not recognized Flash chips.
8. Fixed "Patch" option bug.
9. UDA(CP) flashing for RM84,RM99 (N70-1,N70-5)
10.Self Tests monitor introduced.
11.Unlock of DCT4+ (BB4.1 ASIC 2 & 11) phones.
12.Certificates backup for BB5 phones introduced ("Rd Cert"and"Bk.308"for SL_Data)
13.BB5 File System Format introduced.
14.Windows Vista(tm) 32bit OS support.


LG_GSM v2.0.5.0
----------------
1. KG110, KG320 support fixed.
2. Added new models.
3. Windows Vista(tm) 32bit OS support.


SAMs v2.0.5.0
--------------
COMMON
Windows Vista(tm) 32bit OS support.
Cut Power option (Restart - power on mobile)
TRIDENT
C140,C216,C240,C250,C260,C266,C268,C308,P310,P318, X166,X636 added.
MSL1 bypass, allows direct unlock.
OM635x
E635 added.
SWIFT
E256,E376,E480,E488,E736,E750,E758 added.
E25x direct unlock.
Full TFS Read, TFS editor.
Option to exclude E2P part from MCU read.

All other modules have been updated to include Windows Vista(tm) 32bit OS support.

Many thanks to all those who have supported us!!!

Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk)

[Odia The Ultimate]

Release Date: 10/05/2007

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).
You can download from here, until the support site can be updated:-

http://rapidshare.com/files/30500677/HWK_Suite_v02.05.001.exe.html

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


DCTxBB5 v2.0.5.1
-----------------
1. Revised "Init SimLocks" function, now allows direct unlock of
1600(RH-64,RH-65)and other models.


Many thanks to all those who have supported us!!!

Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 14/05/2007

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).
You can download from here, until the support site can be updated:-

http://rapidshare.com/files/31347231/HWK_Suite_v02.05.002.exe.html (http://rapidshare.com/files/31347231/HWK_Suite_v02.05.002.exe.html)

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


DCTxBB5 v2.0.5.2
---------------------
1. Added BB5 files integrity check, while flashing.
2. Fixed some minor bugs in "Init SimLocks".
3. Added Dejan solution for BB5 ("Locks") 6630,6680,6681,n70,n90 etc... Test others on your OWN risk!

Many thanks to all those who have supported us!!!

Special thanks to Dejan for releasing the solution, respect from SarasSoft!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 23/05/2007

The Official release is in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


DCTxBB5 v2.0.5.3
---------------------
1. Modified BB5 codes enter, to allow unlock "Counter Expired".


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 29/05/2007

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).
You can download from here, until the support site can be updated:-


http://rapidshare.com/files/34039781/HWK_Suite_v02.05.004.exe.html (http://rapidshare.com/files/34039781/HWK_Suite_v02.05.004.exe.html)


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


SAMs V 2.0.5.4
---------------
TRIDENT
U600,U608 added.
"Test Mode" enter improved.
Warning about Battery usage, during UI operations.
Corrected Reserved Regions for some models(D83x,D84x,E90x,P31x,X82x)
Added MSL calculation, allows direct unlock and show correct
codes for new models(D83x,E570,E90x,P31x,U60x,X5xx,X63x,X68x,X8x x,.)
IMEI challenger implemented, allows rebuild IMEI for new models.



Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 04/08/2007

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).
You can download from here, until the support site can be updated:-


http://rapidshare.com/files/46916210/HWK_Suite_Minor_v02.05.005.exe.html


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


LG_GSM V 2.0.5.5
-----------------
1. Fixed support of Spansion MirrorBit Flash chips.
2. Infineon SuperGold2 models added (KE850,KE970, ...)
3. Infineon EgoldVoice models added (KG270,KG271,...)
Warning Infineon models works with battery only !
4. Mediatek models added (C2500, C2600, ...)


SAMs V 2.0.5.5
---------------
TRIDENT
E840,F300,F308,U100,U108 added.
Full Reset(*2767*3855#)is mandatory after flashing !
If make Asia<>EU change, use *2767*3855# before flashing.
SWIFT
D900i,D908i,E200,E208,E390,E398,E590,E740,E830,E83 8 added.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 18/08/2007

The Official release will be ready in our download area www.ufsxhwk.com (http://www.ufsxhwk.com/).
You can download from here, until the support site can be updated:-


http://rapidshare.com/files/49761459/HWK_Suite_Minor_v02.05.006.exe.html


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


New Support Area Access - All you need is an Original HWK who's HID is in the master database (can be updated with update client), no username, no password, no waiting for activation. - We hope you will all enjoy this small gift and it will make ours and our customers lifes easier :D


LG_GSM V 2.0.5.6
-----------------
1. API Updated to allow support access (No user update)


SAMs V 2.0.5.6
---------------
1. API Updated to allow support access (No user update)


SeDBx V 1.0.5.6
---------------
1. Initial Public Release - This module will be updated over the next few weeks to become inline with the rest of the HWK Suite of Modules.
(See sticky post - SeDBx Quick Guide for information on how to use this new module)


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 13/09/2007


http://rapidshare.com/files/55317801/HWK_Suite_Minor_v02.05.007.exe.html


This release contains a new update client which resolves the cannot open URL message, some users have had over the last few days.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


LG_GSM V 2.0.5.7
-----------------
1. Infineon SuperGold2 models unlock (KE850,KE970, ...)
2. KE970GO added (KE970G)


SAMs V 2.0.5.7
---------------
TRIDENT
C520,M300,M600,X526 added.


SeDBx V 1.0.5.7
---------------
1. DB2020 User Lock code reset to 0000.
2. GDFS Info (Displays User Lock code for non DB2020 models)


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 28/10/2007

The Official release is ready in our download area http://sarunasoftware.com/cardmain.php?dir=HWK_SW/.


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
New Users or users who un-installed the old version, should download and install the HWK Support Suite and run the client, before trying to install the full HWK Suite

UFS_DCTxBB5 v2.0.6
--------------------

1. Dual Line flashing for BB5 introduced (Required UFS firmware V2.8 2007)
2. All avalaible phones supported (including RAPIDO v1.12, v1.13)
3. "Verify" function for BB5 added.
4. Latest Flash Update pack (7.40.35.29728) supported.
5. Support of Muxed Nand.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. This has always been the case with 7 pin cables, but from this release 7 pin cables are supported by UFS+HWK.

UFS_LG_GSM v2.0.6
-------------------

1. KG290 support added.
2. "Support" button, to access support site.


UFS_SAMs v2.0.6
-----------------

COMMON
Remade user interface.
"Support" button, to access support site.
TRIDENT
E950,F200,J600,J600E,J608,U300,U308,X830N added.
Read Codes for J600,J600E,J608
SWIFT
E598,E768,G600 added.
Unlock Codes on Info for D820,D900,E250,E740,G600.


UFS_SeDBx v2.0.6
------------------

1. "Skip Info Checking" allows reflash dead phones.
2. "Support" button, to access support site.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 21/03/2008

The Official release is ready in our download area http://sarunasoftware.com.


Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


NOTE: Support Access is via the software modules only, download managers have been limited to 3 connections.


UFS_DCTxBB5 v2.0.7
--------------------

1. New BB5 products:
RM-179,RM-223,RM-233,RM-244,RM-256,RM-264,RM-269,RM-278,RM-279,
RM-313,RM-314,RM-320,RM-321,RM-322,RM-323,RM-397,RM-421,RM-426
(N81-1,N81-3,8800e-1,E51-1,N81-5,7900d-1,N81-6,6500s-5,5610d-5,N82-1,
N82-2,N95-2 8G,N95-6 8G,6301,6301b,6500c-5,N95-4,E51-2)
2. ISM flashing support for BB5 products.
3. Improved DCT4/WD2 Flash Loaders version display.
4. Fixed BB5 PM file open bug.
5. Improved Extended PHONET messages handling.
6. Store of Ext.VPP setting in INI file.
7. Support of new Flash Chips.
8. Fixed CNT flashing for 7370 and 6151.
9. Flash Update pack (7.46.43.30662) added.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. This has always been the case with 7 pin cables, but from this release 7 pin cables are supported by UFS+HWK.


UFS_LG_GSM v2.0.7
-------------------

1. KG280, KP200, KP202, MG280 support added.


UFS_SAMs v2.0.7
-----------------

TRIDENT
C170,C178,C188,E210,E218,E840B,E848,E870,E878,E888 ,E958,
F210,F218,P520(Armani),M608,T519,T629,U600B,U608B added.
OM(SYSOL)
C160,C160B,C160L,C160M,C166,C168,C180,C450,C458,CC 03,
M110,X540,X550 added.
E2P unlock fixed for E420,E428...
Implemented MSL calculation, allows direct unlock
without E2P corruption and shows correct codes.
Rebuild of corrupted Master Key during wrong unlock.
IMEI rebuild for new models (Sysol3)
SWIFT
D880,D888(Duos),E746,G608,L600,L608,M610,M618 added.
Implemented MSL calculation, allows direct unlock, and
show correct codes, without any data lose or setting to
default values of MSL, BTID, IMEI or Radio settings.
E2P Sections Read/Write introduced (compatible with TAT)
IMEI and BTID rebuild.(Imei option for Swift_1 only now)
Fixed bug of 0 length TFS files flashing (affected:
java appletts in D880, E200, E250, G600, M610 products)
COMMON INFO
E2P(hee)sections R/W allows to transfer calibration data,
radio setttings, etc. from product to product, without
damage to other vital data, unlike E2P or FULL clone.
Or allows to Read-Edit-Write well known values.
Warning,
Access to some sections can be denied by firmware, or
can have different values dependand on firmware version.
In case of protected or none existing section will have
result length of 0 or lose of TAT mode.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 14/05/2008

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


Since this is a MINOR release there is NO need to update your HWK, there is also NO need to remove HWK Suite v2.0.7


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.7.1
----------------------

1. New BB5 products: RM-337,RM-364,RM-365,RM-366,RM-451
(6300i,3120c-x,8800e-5)
2. New DCT4 products: RM-340,RM-341,RM-362,RM-363
(2600c-2,2600c-2b,5000d-2,5000d-2b)
3. Flash Update pack (8.6.1.31560) added.
4. New RAP, UPP ASIC's and FLASH Chip's support.
5. New DCT4+ product unlock (see corresponding list)
6. BB5 ASK file will be created during "Rd Cert"

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 23/05/2008

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


Since this is a MINOR release there is NO need to update your HWK, there is also NO need to remove HWK Suite v2.0.7.x


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.7.2
----------------------

1. New DCT4+ versions support:
1200b(RH-100 v5.06)2600c(RM-340 v561)

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


SAMs V 2.0.7.2
---------------

TRIDENT
B100,B108,B200,B300,S710i added (DUNL,IM,FL)
B100,U600,U600B MSL Repair introduced.
OM(SYSOL)
C420,C420L,C421,C425,C426,X560,X560L,X566
added (DUNL,IM,FL,SECT)
SWIFT
E747.F250,F258,J700 added (DUNL,FL,SECT)
Chinese FOTA products E838, J708 flashing.
Added sectors count for RAW NAND read.
COMMON INFO
Product filter added.


SeDBx v2.0.7.2
---------------

1. USB Flashing introduced.
2. CID53 Support for DB2020 and PNX5230 platforms.
3. CID Upgrade introduced.
4. FS Upgrade files flashing. (FSUPG)
5. GDFS Info now Displays User Lock code for DB2012 models also.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver

SeDBx Quick Guide has been updated.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 14/09/2008

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com).


Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.0
----------------------

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.0
-----------------

v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.


SAMs V 2.0.8.0
---------------

TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.


SeDBx v2.0.8.0
---------------

DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver

SeDBx Quick Guide has been updated.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 14/01/2009

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.0a
-----------------------

1. Flash Fix added to installer


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


SAMs V 2.0.8.1
---------------

TRIDENT
CC01,P258,U600G added (DUNL,IM,FL)
TRIDENT VISION
B220,B310,B320,B518,B520,B528,J600G,J610,J618,M318 ,M620,M628
added (CUNL,FL)
L320 added (DUNL,IM,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
B110 added (DUNL,IM,FL,SECT)
SWIFT
D618,D980,E2510,F250L,F268,F278,G600G,G618,J770,J8 08E,L258,M150,
M200,M3200,M3510,S3600,T429,U708E,U808E added(DUNL,IM,FL,SECT)
D780,D788,D880,D888,D980 SLAVE support added (DUNL,IM,SECT)
J150 fixed (DUNL,IM,SECT)
IM Rebuild added and RAW TFS Read fixed for these models:
D618,D780,D788,D880,D888,D900i,D908i,D980,E200,E20 8,E250,
E250D,E250V,E256,E258,E258D,E251,E251C,E480,E488,E 590,E598,
E740,E747,E830,E838,E2510,F110,F250,F250L,F258,F26 8,F278,G600,
G608,G808E,G618,J150,J210,J700,J708,J770,J808E,L25 8,L310,L600,
L608,M150,M200,M610,M618,M3200,M3510,P180,P260,S36 00,T429,U708E,
U808E,U908E (Need power up phone with battery after IM done !)
SWIFT-AEROFONE
B130,B130S,B130T added (DUNL,IM,FL,SECT)
SWIFT-3G
B2700,J800,L700,L708 introduced (DUNL,FL,SECT,BT)
SKYWORKS
C100 - 'Not Released Yet' bug fixed.
QUALCOMM
F480G,F480H,M7500,M8800,S7330,U900F,U900G,U900K added(FL,INF,REUL)
Added QualComm mode support:
(*#QUAUSB# to enter QualComm mode, QC Debug Interface on USB)
(*#SAMUSB# to enter Samsung mode, QC Debug Interface on RJ45)
QCDI Info, NVM Read, RAM Read added.
UNLOCK and UNFREEZE introduced for these models:
F480x,L760x,U900x,Z240 (Use [QCDI Info] button to readout keys)
COMMON
Stop button added.
User interface localisation.

Samsung / Qualcomm USB Drivers can be downloaded here:-
http://rapidshare.com/files/190638170/Samsung_USB_Drivers.zip


Update Client V 2.0.8.1
----------------------

Fixed Exception errors on req-fbi process

!!!THERE IS NO NEED TO UPDATE YOUR HWK SINCE 2080 RELEASE IF ITS WORKING OK !!!


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.:)


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 10/02/2009

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.2
----------------------

1. Flash Update Pack problems Fixed.
2. New BB5 products:
RM-247,RM-297,RM-333,RM-334,RM-335,RM-348,RM-349,RM-350,RM-356,
RM-398,RM-399,RM-415,RM-427,RM-428,RM-429,RM-437,RM-449,RM-450,
RM-472,RM-493,RM-494
(N96-1,N96-5,N85-1,N85-3,N85-5,N79-1,N79-3,N79-5,5800d-1,7510a,7510a-b,
6600s,5800,5800,3610a,E63-1,E63-2,E63-3,N96-3,E71-5,E66-5)
3. DC4 Flash Chip 0020883C Fixed.
4. New DCT4 products:
RH-111,RH-112,RH-113,RM-438,RM-439,RM-490,RM-500
(1202-2,1202-2b,7100s-2,7100s-2b,1680c-2b,2680s-2b)
5. New DCT4+ UNL versions support:
1200(RH-99 v5.71,v5.80) 1202(RH-112 v2.80) 1208(RH-105 v5.71,v5.80)
1650(RM-305 v5.71,v5.80)
6. User interface localisation.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.2
-----------------

1. Infineon GB100,GB105,GB106,KG285,KG288,KP100,KP105,KP106,KP 107
support added. (BIN bundle files open as FLS)
2. Read/Write for Infineon EGOLD Voice added.
3. Auto Backup for Infineon EGOLD Voice added.
4. ADI KF240, KF300
support added. (BIN bundle files open as Code)
Cable as for KP130,KP210,KP260
5. QualComm models introduced.


SAMs V 2.0.8.2
---------------

TRIDENT
B270 added (DUNL,IM,FL)
TRIDENT VISION
J610 MSL corrected (DUNL,IM)
E215L,M320L added (CUNL,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
M140 added (DUNL,IM,FL,SECT)
SWIFT
J706,L708E added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130,B130S,B130T fixed flashing for HW 0.600
QUALCOMM
ENUMERATION NOT EXIST: 20 bug fixed (up to COM256 supported)
Fixed flashing for OEMSBL V5.32 and higher (M7500,M8800)
UNLOCK and UNFREEZE added for these models:
F480F,M7500(Armani),M8800(Pixon),U700,U700B,U708,U 800,U800F
(Use [QCDI Info] button to readout keys)
S7220,S7350 added.

Samsung / Qualcomm USB Drivers can be downloaded here:-
http://rapidshare.com/files/19063817...SB_Drivers.zip (http://rapidshare.com/files/190638170/Samsung_USB_Drivers.zip)


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.http://forum.gsmhosting.com/ubb/smile.gif


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)

[Odia The Ultimate]

Release Date: 21/03/2009

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


ATRz v2.0.8.3
-------------

1. Fixed clipboard issue on Vista.


UFS_DCTxBB5 v2.0.8.3
----------------------

1. New BB5 products: RM-495,RM-496 (5130c-2,5130c-2b)
2. New DCT4+ products: RH-121,RH-122 (1661-2b,1661-2)
3. New DCT4+ UNL versions support:
1202-2,1202-2b (RH-111,RH-112 v3.00, v3.10)
1661-2 (RH-122 v3.10)
2610,2610b (RH-86,RH-87 v7.11)
2680s-2,2680s-2b (RM-392,RM-393 v4.56, v4.91)
5000d-2,5000d-2b (RH-362,RH-363 v3.50, v3.54)
7070d-2 (RH-116 v6.20)
4. Simlock status detail info for DCT4 and BB5 models added.
5. Fixed clipboard issue on Vista.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.3
-----------------

1. BIN (TotalBin) files support added for ADI models.
(BIN bundle files open as Code)
2. ADI KP260, KP265 UNLOCK and REBUILD fixed.
3. ADI KP170, KP175 added, cable as for KP130,KP210,KP260
4. LGMDP NV2 format files support for QC NVM Write.
5. User interface localisation.
6. Fixed clipboard issue on Vista.


SAMs V 2.0.8.3
---------------

TRIDENT
C275L,C500L,C506,C510L,C516,E570L,U106 added (DUNL,IM,FL)
TRIDENT VISION
B520B,M310L added (CUNL,FL)
OM(SYSOL)
C145,C161,C168B,M140L added (DUNL,IM,FL,SECT)
SWIFT
C3610C,E200B,E230L,E251L,F270L,F275L,F480L,J700L,P 906,U900L
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130L,E1110(Euro and Asia),E1110C,E1117,E1117L
added (DUNL,IM,FL,SECT)
Increased flashing speed.
QUALCOMM
G400L,M8800B,V820L added.
UNLOCK and UNFREEZE added for these models:
G400,G400F,G400L,Z150
(Use [QCDI Info] button to readout keys)
COMMON
Fixed clipboard issue on Vista.


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.http://forum.gsmhosting.com/ubb/smile.gif


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk)


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3

[Odia The Ultimate]

Release Date: 06/04/2009

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.4
----------------------

1. Added info about flashed Certificates for BB5.
2. Corrected DCT4+ unlock error messages.
3. Find Product settings by VPL files.
4. New BB5 product RM-458 (6208c)


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


SAMs V 2.0.8.4
---------------

TRIDENT
B100M added (DUNL,IM,FL)
TRIDENT VISION
B310R added (CUNL,FL)
SWIFT-AEROFONE
E1070,E1100T,E1125 added (DUNL,IM,FL)
QUALCOMM
Increased Comms speed on RJ45 interface.
UNLOCK and UNFREEZE added for these models:
L810,L811
(Use [QCDI Info] button to readout keys)


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.http://forum.gsmhosting.com/ubb/smile.gif


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3 (http://rapidshare.com/users/VAY6Q3)

[Odia The Ultimate]

Release Date: 08/06/2009

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.5
----------------------

1. New BB5 products: RM-412,RM-413,RM-443,RM-505,RM-506,RM-507,RM-570
(E75-1,E75-2,6303c,N97-1,N97-5,N97-3,6600i-1)
2. Introducing RAPU-YAMA ASIC: RM-368,RM-431,RM-432,RM-470
(6260s-1,5630d-1,5630d-1b,6700c-1) support added.
3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543
(2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2)
4. New DCT4+ UNL versions support:
RH-99 v5.91, RH-100 v5.80, RH-105 v5.91, RH-106 v5.80, RM-305 v5.91
(1200, 1200b, 1208, 1208b, 1650)
5. Certificates write error in DL mode fixed.
6. Check is ASIC supported by firmware for DCT4 and WD2 products.
7. Read UEM IMEI or ESN for DCT-4/WD2 ASIC 2,5,6,11 when Rd UEM.
8. Added backup of PM 120 block when make Bk.308 (if exists)
9. Added [Skip Erase] option for BB5 products (for Experts Use Only)
10.Added [1331] option, to switch on/off NU48Fxxx Intel Chips Solution.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.8.5
-----------------

1. MTK KG195,KP199,KP220 support added.
2. PCS files support added for MTK models.
3. Cable type indicator.


SAMs V 2.0.8.5
---------------

TRIDENT
B100K,C140i added (DUNL,IM,FL)
TRIDENT VISION
C3010,C3050,C3060R,C3110,C3110C,S3500 added (CUNL,IM,FL)
M120,M128,E1040,S3030 added (DUNL,IM,FL)
B520 Vodafone support added.
(use B520B-V model, not mix with B520, filenames are similar)
(Use [Reset MMI] if phone ask for password without SIM)
New MSL bypass algo introduced (B220,..,C3050,E1410,S3500...)
allows direct codes reading, unlock and IMEI repair.
MSL Repair introduced, allows to repair or use alien E2P
(Repair of "User Fault on Illegal Trial !!" and restore IMEI)
OM(SYSOL)
C160G added (DUNL,IM,FL,SECT)
SWIFT
B2100,C5212,E250i,F265L,F270,J700i,M158,P250,U800E ,X576
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B100i,B210 added (DUNL,IM,FL,SECT)
C270,E1100,E1120,E1125W,E1125-SEA,E1210M,E1210S,E1310B,
E1310M,E1310S,E1360B,E1360M,E2100,E2210 added (DUNL,IM,FL)
(Do not mix B-C-M-L-S-T-EUR-SEA models! More info on support)
B130S,B130T flashing fixed (blinking or frozen phone)
(Must select target firmware as model, e.g. model is B130 and
want to flash B130S, select B130S as the model.)
SWIFT-3G
P270 added (DUNL,FL,SECT,BT)
QUALCOMM
A777,M7600,M7603,M8800C,M8800L,S5600,S5603,S8300N added.
[Write E2P] (NVM) added.
UNLOCK and UNFREEZE added for these models: A411,A777,S7220,
S7330,S8300,S8300C,Z230 (Use [QCDI Info] button to read keys)
Old models UNLOCK and UNFREEZE: Z300,Z500,..,ZM60,..
(these are not in models list, select any model. Use
[Mobile Info] button to read keys & [Unlock] to direct unlock)


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.http://forum.gsmhosting.com/ubb/smile.gif


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3 (http://rapidshare.com/users/VAY6Q3)

[Odia The Ultimate]

Release Date: 18/08/2009

The Official release is ready in our download area http://sarunasoftware.com (http://sarunasoftware.com/).


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.0.9.0, old client versions will no longer work.

You MUST be running HWK software 2.0.9.0 to access support.


UFS_DCTxBB5 v2.0.9.0
----------------------

1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,
RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602
(6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,
6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)
2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b)
3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)
4. Corrected VPL parsing for some models (N97)
5. Only NU48F256 left in [1331] option and moved to BB5 Tab.
6. SX4 bypass introduced using temporary NPC certificate erase.
7. [One Boot] option introduced (RAPx based One MCU products)
8. Enabled Files Multiselect, when Writing Certificates.
9. Erase Option for BB5 (for Experts Use Only !)


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG GSM V 2.0.9.0
-----------------

1. Unlock Codes Display for Infineon EGOLD Voice added
(Boot and See NCK Code for Instructions Press UNLOCK)


SAMs V 2.0.9.0
---------------

TRIDENT
T539 added (DUNL,IM,FL)
TRIDENT VISION
Fixed MSL algorithm for some models (C3050,...)
SWIFT
D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B,
E2210B added (DUNL,IM,FL)
QUALCOMM
Manual Port Selection Added
(Use Refresh, After Each Phone Reboot or Reconnect)
(Untic QualComm Mode, Before Flashing)
F480R,i6210,U900W added.
UNLOCK and UNFREEZE added for these models:
A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540


We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

Conditions:-

1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.http://forum.gsmhosting.com/ubb/smile.gif


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk (http://www.sarasbox.co.uk/)
www.gsm-solutions.co.uk (http://www.gsm-solutions.co.uk/)


Official SarasSoft Rapidshare Mirrors:-

http://rapidshare.com/users/VAY6Q3 (http://rapidshare.com/users/VAY6Q3)