View Full Version : EVOLUTION CLIP is only nice box and nothing more or i am wrong ????
mali_kruno
04-16-2003, 21:42
I have stock of evolution clips and not one of them is working, one thing i can make with this clip put xx.14.04 from enter specialcode to please wait to enter and this is not why i have pay for this clips:mad: :mad: :mad: :mad:
Now my costumers have sold his baracuda clips and bay from me evolution and now my costumers loosing money becouse they have no clips for unlocking phones and i must replace this clips with baracuda clips ( not good for my buissnes ):o :o :o
alex if you are reading this please take care for your products and make this f****** clip working becouse if baracuda can unlock this phones evolution clip must do this job too
:confused: :confused: :confused:
If there is any trick or any solution to upgrade this clips with cable conected to pc i think it will make my day !!!!
and one more thing : BEFORE RELEASING PRODUCTS ON MARKET PLEASE TEST IT BEFORE AND DONT WRITE "NEW GENERATION CLIP", IF THIS IS NEW GENERATION I THINK IT IS BETTER TO MAKE OLD GENERATION CLIP BECOUSE NEW GENERATION DONT WORK AND OLD WORK AS PROMISED :mad
Regards Mali
John_Doe
04-17-2003, 00:59
same problem here, evolution clip is not working on xx.14.04.
somebody else has tested it on this version??
G$M solution
04-17-2003, 01:28
hi
i am one off this people .......
Now my costumers have sold his baracuda clips and bay from me evolution and now my costumers loosing money becouse they have no clips for unlocking phones and i must replace this clips with baracuda clips ( not good for my buissnes )
(words from kruno)
yesterday i fack 10 motorolas v50 v14.04
and i lose my 150 euros ....
This clip cant unlock phones this is only nice box .......
best regards
@ mali
Alex can't do his clip working, since his brother do the job and alex is just a 2m long guy without brian and ideeas. His only ideea was to steal contacts and ideeas and do other things...
Zulea and SS was absolutely right to warn me teach alex too much, and now i have the result.
@Raskal
Please read your email. Thank you.
WBR
Motorola evolution is a big f***ing s**t. I recommend to not purchase this !!! you will spend your money without getting what you need in exchange.
hehe it's not problem to repair and unlock
V50 xx-14-xx using only EMMI2D
about 10 minutes per 1 phone
WBR
Crew
Headmade
04-17-2003, 13:26
Hello, so people what you suggest me buy or not buy that clip, from networkunlock , Mr Nadeem for 150 USD??????????
In some other sites it coast 300 and more USD,
Thenk You
G$M solution
04-17-2003, 13:38
Originally posted by Crew
hehe it's not problem to repair and unlock
V50 xx-14-xx using only EMMI2D
about 10 minutes per 1 phone
WBR
Crew
yes you are right ......
i need best price for this box ....
best regards
mali_kruno
04-17-2003, 13:41
Originally posted by Headmade
Hello, so people what you suggest me buy or not buy that clip, from networkunlock , Mr Nadeem for 150 USD??????????
In some other sites it coast 300 and more USD,
Thenk You
Read all posts and you must decide this by yourself, if yes than only 100% tested and with waranty if not working to send it back on his costs !!
Regards Mali
@ mali_kruno
Servus Milane. what whork and what not whork on this Evolution Clips ???
**Never say Never **
PS: posalimi na mailom...molimte
Did you see the movie "DEAF DOG HUNTING"?
translate romanian:"CAINE SURD LA VANATOARE"?:)
I think is an interesting movie, is about a dog which is starving runing from there to there...
The smarest guys are alwais winning...
You are always a winner when you're smart, but when you don't you're starving.
And there is on more Romanian song: "Nobody likes me, no no, no no.
translate romanian:"nimeni,nimeni nu ma vrea..ela ela laa trala la la la tral lala la:)
mali_kruno
04-17-2003, 15:12
Originally posted by all-gsm
@ mali_kruno
Servus Milane. what whork and what not whork on this Evolution Clips ???
**Never say Never **
PS: posalimi na mailom...molimte
I am not Milan, Milan is my partner !!
My name is Kruno and nickname is Mali
Regards Mali
@ Alex_GsM cann explain this situation ??? i buy this from your resseler...and befor i resell to my customer i need the True...!!!
**Never say Never **
Headmade
04-17-2003, 17:43
To Mali-Kruno.
You sell evo clip too, did You sell tasted clips, if yes - price???
mali_kruno
04-17-2003, 18:58
Originally posted by Headmade
To Mali-Kruno.
You sell evo clip too, did You sell tasted clips, if yes - price???
yes all my clips are tested but not working as you can see in this thread !!!
Regards Mali
Hi.
Just a qeustion, for me to get a clear picture.
This ''evolution clip "" sucks ???
regards
Sjakie
mali_kruno
04-17-2003, 20:18
Originally posted by sjakie
Hi.
Just a qeustion, for me to get a clear picture.
This ''evolution clip "" sucks ???
regards
Sjakie
if we can make it working it will be great product but for now this product have many problems
Regards Mali
Originally posted by mali_kruno
I have stock of evolution clips and not one of them is working, one thing i can make with this clip put xx.14.04 from enter specialcode to please wait to enter and this is not why i have pay for this clips
Now my costumers have sold his baracuda clips and bay from me evolution and now my costumers loosing money becouse they have no clips for unlocking phones and i must replace this clips with baracuda clips ( not good for my buissnes )
I was offered to sell this product but I saw it on CEBIT last month, before it came on the market, and it was tested by a friend of mine... so, it didn't work as it was promised... "all-in-one" product for such a small amount of money... to suspicious...
Fast money is not always the best money :)
Regards
Spalato
P.S.: your customer brought his phones to me today and they were fixed :D :D
mali_kruno
04-17-2003, 22:35
Originally posted by Spalato
I was offered to sell this product but I saw it on CEBIT last month, before it came on the market, and it was tested by a friend of mine... so, it didn't work as it was promised... "all-in-one" product for such a small amount of money... to suspicious...
Fast money is not always the best money :)
Regards
Spalato
P.S.: your customer brought his phones to me today and they were fixed :D :D
this days you will have all motorola phones (xx.14.xx) in Zagreb only for you becouse we are all fu*** up with this evolution clip !! :o :o
All i can say is that i am wating for baracuda to come, it works only on old series of motorola phones but the mail thing is that it works
Regards Mali
Originally posted by mali_kruno
this days you will have all motorola phones (xx.14.xx) in Zagreb only for you becouse we are all fu*** up with this evolution clip !! :o :o
All i can say is that i am wating for baracuda to come, it works only on old series of motorola phones but the mail thing is that it works
Regards Mali
COOL!!! Will fill extra batteries for my two business phone lines :D :D , for the next days :)
Since I bought my Barracuda, I made some 1300-1400 pcs. of those V50 F0.14.04 fonez from CRONET (no joke).
Not to mention Victor's soft and Zulea's MotoKey... I unlocked/flashed tons of Motorola phones...
So I have 3 different SW/HW for unlock of Motorola phones...
I wouldn't change my winning team for 10 evolution boxes :) :)
Regards
Spalato
Headmade
04-17-2003, 23:26
So where is the main distributor? NETWORKUNLOCK?
Why You didnt say a word???
Originally posted by Headmade
Why You didnt say a word???
Well, that was one month ago mate... in that time it has been said the problems will be corrected and upgraded... since I showed no interest for resell, I didn't contact anyone after that... I even didn't knew that it does not work till I saw these posts here...
Spalato
Originally posted by mali_kruno
I have stock of evolution clips and not one of them is working, one thing i can make with this clip put xx.14.04 from enter specialcode to please wait to enter and this is not why i have pay for this clips
Now my costumers have sold his baracuda clips and bay from me evolution and now my costumers loosing money becouse they have no clips for unlocking phones and i must replace this clips with baracuda clips ( not good for my buissnes )
alex if you are reading this please take care for your products and make this f****** clip working becouse if baracuda can unlock this phones evolution clip must do this job too
If there is any trick or any solution to upgrade this clips with cable conected to pc i think it will make my day !!!!
and one more thing : BEFORE RELEASING PRODUCTS ON MARKET PLEASE TEST IT BEFORE AND DONT WRITE "NEW GENERATION CLIP", IF THIS IS NEW GENERATION I THINK IT IS BETTER TO MAKE OLD GENERATION CLIP BECOUSE NEW GENERATION DONT WORK AND OLD WORK AS PROMISED :mad
Regards Mali
@mali_kruno,
in the picture you can see a marked IC with a red paint .This IC which is painted also is the bad IC in our case.The sittuation was that few of the IC was provided refurbish , directly from the purchaser .Anyway , the solution for repairing this Evolution which are not worked on xx14xx version is very simple.The IC which is market with red colour in the picture , and with yelow colour on it should be replaced with a new one .This new one IC should be provide from your resseler ( the person who sold you the Evolution clip ).All resseler RECIVED ALREADY few days before the IC's for exchange and they should be able to replace this asap, on demand.
Don't forgot the Evolution clip is "next generation " one , if you take a close look , the pcb use sockets , so should be upgradable..right?! :D
@mali_kruno if you still have problem with replacement of the IC I will replace for you don't wory , we are team here , and this is team work...,.. keep cool!!
http://www.alfamobil.ro/img/evolutions.jpg
mr_x4you
04-18-2003, 09:39
I think this Evolution is the best, no matter what was written in here !
''I think this Evolution is the best, no matter what was written in here !''
Seems your the only one.
I ask myself why.
regards
Sjakie
Networkunlock
04-18-2003, 13:26
@ Mali Please check your email.
It is not the way of myself or AlexGSM to promote a product that does not do what it is supposed to. Nor is it our way to ignore the positive criticism that has been made. If you have a box that is not working i fully understand the frustration that you have and as i mentioned before we will do everything possible to resolve the situation. However as life is sometimes things are overlooked. The first batch of Evolution produced was fine. Due to malicious circumstances production was changed location and it appears that 2 faults have ocurred as a result.
First if the problem is with 13/14 versions it is as a result of damaged IC and if the problem is P2k this is as a result of damaged cable. I have already mentioned that if anyone is experiencing these problems then they should contact their reseller as they have been provided a supply of replacements. If your reseller is not helpful ( no reason why they should not be) then please contact SUPPORT (unlock@networkunlock.com) and we will resolve the situation. Once either of these problems is resolved the product will 100% do all that is listed here MOTOEVOLUTION (http://www.moto-evolution.net) . It is unfortunate that this has happened but at the same time I can asssure you that resolving either of these faults will result in a fully functional box. All boxes that are being shipped at present have been checked before despatch.
@ Raskal....Many thanks for your constructive criticism. As always your comments are enlightening.
BUT you did not mention that the EMMI and P2K (Patriot clip) and Barracuda were also from the same author.
I will in the subsequent post upload a picture of the PCB to demonstrate the IC that need to be changed and also schematic of the P2K cable for those who wish to resolve themselves. All other can send to their supplier.
Networkunlock
04-18-2003, 13:31
Sorry just noticed. If you scroll up you will see Irinel has already posted the PCB to show the IC.
mali_kruno
04-18-2003, 14:09
thanx to networkunlock and irinel for help !!!
Regards Mali
mr_x4you
04-18-2003, 14:27
There is always a way to solve problems. You just have to be a little pacient.
You right all problems can be solved so far it is only the chip, but i still wonder why alex or his brother no comment any thing on this problem?!:confused:
Originally posted by Raskal
You right all problems can be solved so far it is only the chip, but i still wonder why alex or his brother no comment any thing on this problem?!:confused:
@alexGSM-team is the nick for the "team" so the "team" can take care to make support all the time for alexGSM products.So is no need any individual comments.
alexGSM-team is one of the biggest moto e-gsm solutions producer, and I now Alex is working hard to finish asap a new project.
I think he have no time for this "kind of politics ..." .
Our team respect his work and we are agree with him.
Yes because he is too buisy and have no time to return money to others and to give technical support to his clients, we decide to do "develop" Patriot 3 and now it is ready for delivery...uuuuppsss...and with Patriot 3 you can even chage the IMEI to any number you like, even 000000000000000
...but really, no joke man, alex himself can't do nothing, he don't even know the difference between DB9 and RJ45, so he can at last answer the questions of his clients.
About " biggest moto e-gsm solutions producer, " i think you're wrong. Exist other ppl as well my friend...so "Say never, NO!"
Networkunlock
04-19-2003, 19:02
@ Raskal
There are plenty of people in the team that can answer any TECHNICAL queries. Is not necessary for Alex or his brother to make any comment.
For all the fuss that you are making you have not mentioned what problem you are having with your evolution box or where you bought your box from. (You do have a box don't you?).... instead of playing politics.
Fact is that this clip is a big mess. If one, two or three persons say this is no matter, but read the topics from all persons, there are more than one bug.
Of course i know every thing about this box, you not forgett who made the design and have the ideea for that:) and finally who paid 33% of the development of this clip.
Networkunlock
04-19-2003, 19:39
Is futile arguing with you Razvan.
This section is for SUPPORT on Motorola and to assist people having problems.
You still DONT mention what problem YOU are having with the box so that we can resolve.
if you wish to continue what you know or don't know or what processes you are starting or what development costs please do this like any mature person privately through email or if you seek the attention then please start a new topic in the TRASH section where your opinions can be voiced. Constructive and warranted criticism I have no problem with but sadly this is lacking from you
And yes I have read the topics and am now aware of the bugs and meaures have been taken to rectify this.
As has been mentioned earlier all problems will and are being resolved. Just scroll through the thread and you will see the solution and if you don't a simple email to NETWORKUNLOCK (unlock@networkunlock.com) will resolve all and ensure that you are more than satisfied with your purchase.
I am talking about a technical problem here and this ppl paid a lot of money for this product, i think they have to write down the problems and they should know the truth. It is not correct to talk about topic in TRASH for things ppl paid money.
You try blame me, because i post my opinion. Tell me do you want to say i am a lier saying that i know the history of this clip from beginning. I know where was the problems i know wich are the problems. What do you expect me to do? Look at baracuda, many ppl can confirm that it is a big mess.
As you see i am talking about EVO only, i am not talking about P2K Patriot clip because this product is good.
After Patriot clip is cracked, it's time now for the DSC-Bus listener..you know..
Networkunlock
04-19-2003, 20:33
You want me to cut it short.
You only talk about P2k clip as you were involved in selling this. All else has left you with a bitter pill to swallow..... talking about pills.... then again lets not stoop to ur lowly level.
I have no further comments Razvan for you. My comments here will remain for support only. Just take care man. Open your door dont be Fricos ca un iepure
Originally posted by Networkunlock
You want me to cut it short.
You only talk about P2k clip as you were involved in selling this. All else has left you with a bitter pill to swallow..... talking about pills.... then again lets not stoop to ur lowly level.
I have no further comments Razvan for you. My comments here will remain for support only. Just take care man. Open your door dont be Fricos ca un iepure
I mean with cost efficiency someting like that:
Yes Evo sucks, barracuda also sucks before. Best is :
- use victor software ( it is expensive but can flash and unlock, EVO can't even work propper way as promised and FULL support)
- use P2K clip patriot (most of you have this allready)
- use remote unlocking (safest and most efficient method for low qtty of phones)
- use pemaster (FREE on the net)
- use china emmi clip
- use for t191 free soft or clip available for 15 usd
Calculate the costs and you see eficiency.
I see you threat me because i tell only the truth about this product. You invest a lot of money and try protect your investment selling crap.
People from several countries posting here their problems with this product, one say cables are bad, one say does not unlock xx14, one say not work properly on P2K, etc etc..... so there is no reason to say "bad chip" since i use this supplier little bit longe than alex and i have NEVER problems with any chip from him.
For support people should call the phone number of the real techncal guy wich does this motorola box, mail me for his mobile number
Magic2ik
04-21-2003, 19:56
evolution clip also does not unlock old motorolas like
cd920
3688
rascal, can you confirm this ???
Originally posted by Magic2ik
evolution clip also does not unlock old motorolas like
cd920
3688
rascal, can you confirm this ???
@Magic2K
Mike, actually it should unlock this versions since alex brother ask me to give him the hex for the xx13, the one wich is actually used in chinese emmi clips with the red button. If he not change this hex in any way than it should work to unlock 920 and 3688.
I mean this clip http://www.super-trio.com/products/Emmi_new.jpg and this is working 100%.
This EVO crap have really many many bugs, not only the IC story they are telling their customers. Maybe alex have programmed wrong hex in this IC but for sure not so many faulty IC's, this is impossible, because i use this supplier since since march 2002 and have never problems.
Possible bugs are:
- cheap components ( big problem here in china)
- wrong assemby (most probbable problem)
- faulty cables (especially Teleway have this ****)
- bad connectors (also a possibility)
- analphabetismus ( no comment)
Just take a look at the LED's, there are on the pcb on the back side, when i saw this i said him he is crazy, how customer can insert the phone jack and look at the back side of the box if the LED's are operating :)
Any way, after we have ready cracked the patriot clip, we will crack now the barracuda function iside the EVO clip and will implemet this in software to be usable with any roemmi available on the market, than EVO will be obselete any way, just a nice box with nice LED's, nothing more.
The problems with this clip is that as i said, Alex himself is really a long guy without brian, he can cheat and lie but not technical, he is really analphabet. All this do his brother XXXXXXXX, and of course alex cannot know what is going on in china. He came here, steal some contacts, some clients and now he is a BIG PRODUCER, but here life is some time hard, especially if you choose the wrong assembly factories and have not the right contacts :)
If you rememeber the first batch of patriots, all made by alex and 50% faulty, as he managed the production in romania:) now he manage the EVO production and same result.
Just take a look at his products how this brothers screw the resellers:
15.DEC. (was sold for 130 USD for min.25 pieces)
- release of barracuda ( fast assebled not tested 100% on all models) result was, over 30% of the sold barracuda clips was not working and also not unlock all versions he promissed.
20.JAN. (was sold between 85-100 USD for min. 50 pieces)
- release of Patriot P2K clip version II
10.March
- release of EVOLUTION CRAP ( was sold to between 100-120 usd) for big qttys like 100 or 200 pieces. and MCU he sell to china any way much more cheaper than that.
And now you see, reseller had not even time to sell the other stuff and come another product. I say product, not update!!!!
New product, new money for XXXXXXXXX, and of couse they care a ....... about support solong customers push them money in pocket:)
Look at release date and at prices and tell me how can a reseller sell this without no loosing money? This is not logic at all.
The most funny thing is that they try to win customers making prommises about implement C3xx unlocking, but this is NOT possible without hard ware change and this will cost money again
and of couse not any warranty that it works.
We are really waiting for C3xx :)
Magic2ik
04-21-2003, 21:19
hello Rascal....
I tryed to unlock a 3688 this morning for 30 minutes and it did not work..
now i tryed and dit does work....
i dont know why......
can you provinde me with pinout of 2288
greetz
Mike
@raskal
you are 100% right
Magic2ik
04-21-2003, 21:28
i powerd down the clip for 10 minutes, and not working again....
so it should be a bad component
@ Magic2K
Mike download from my server:
www.griffinbox.com/Motorola_Cables.zip
p.s.
i would like to mention that i put this schematic on griffinbox.com server because it was faster for me but this is the cable schematic requested from mike to be used with EVO clip and not with Griffin box (YET) :)
Originally posted by Magic2ik
i powerd down the clip for 10 minutes, and not working again....
so it should be a bad component
You see, Mike. I an not talking bull....
That's why i say, folks keep the old tools for motorola you allready have, they can really unlock most of the models, it is not worth to buy this EVOPROBLEM box.
- for old models (WHITECAP) Motokey, Motofix, Roemmi, PEMASTER, china emmi clip
- for P2K, Victor software and Patriot clips
- for Acer, clips for 15 usd or free software on the net
- for C3xx again victor software or unlock by IMEI
- for old models (WHITECAP) xx14 versions use better unlock by IMEI
Tell me now, i am wrong or right?
Magic2ik
04-21-2003, 21:54
rascal tnx....
but cables look ok
maybe box need to be hot for unlocking old versions .....
Magic2ik
04-21-2003, 21:59
2 pins of the bic seem to be conected....
is this right ????
Mike, it shoud be right, yes. But what you have done???
You have opened the box, my G.O.D, you loose the warranty, man.
Magic2ik
04-21-2003, 22:05
no lose of waranty....
had to replace the PIC's my self
Originally posted by Magic2ik
no lose of waranty....
had to replace the PIC's my self
To make sure the box is work propperly they should include in delivery follow items:
- Evolution Box
- User manual
- set of resitors and capacitors
- 1 pcs. 43E08
- 9v battery (fully charged)
- Hot air solder station
- Labtool48 made in china
- set of screwdriver
- set of additional connectors
- prepaid card with international roaming to use with any "handi" 900 and 1800 mhz (dualband) if have questions why not work after using tools included in package.
Box no need put in package since is sty cast aluminum and have life time warranty :)
Hi,
Better change the name to "INVOLUTION CLIP".
Haaaaa, haaaaa, haaaaaaaa
@ alex-gsm:
In my garrage there still is a box with your 50 pcs. 'garbages'.
Sorry, but the garbage collectors (some nice gipsy guys) don't want to collect this. They said is too dangerous material for environment ;)
@ mali:
What Manole said at Cebit?
Best regards,
Zulea
P.S.
Maybe nothing interesting or constructive in my post, but I posted just to keep this thread in top ;)
P.S. 2
Greetings to all my friend from Greece (Creta) :cool:
Originally posted by zulea2002
Hi,
Better change the name to "INVOLUTION CLIP".
Haaaaa, haaaaa, haaaaaaaa
@ alex-gsm:
In my garrage there still is a box with your 50 pcs. 'garbages'.
Sorry, but the garbage collectors (some nice gipsy guys) don't want to collect this. They said is too dangerous material for environment ;)
@ mali:
What Manole said at Cebit?
Best regards,
Zulea
P.S.
Maybe nothing interesting or constructive in my post, but I posted just to keep this thread in top ;)
P.S. 2
Greetings to all my friend from Greece (Creta) :cool:
still zuleah you have to agree
everyone has a problem with raskal even himself !
everyone that has EVER worked with him are all acused as cheaters...
forget him man
he sits in a little office with no trading to do
everyone walks away from him
i think on this forum a lot of people agree
Originally posted by Spalato
I was offered to sell this product but I saw it on CEBIT last month, before it came on the market, and it was tested by a friend of mine... so, it didn't work as it was promised... "all-in-one" product for such a small amount of money... to suspicious...
Fast money is not always the best money :)
Regards
Spalato
P.S.: your customer brought his phones to me today and they were fixed :D :D
a you mean when we had coffee??:D
Originally posted by Raskal
To make sure the box is work propperly they should include in delivery follow items:
- Evolution Box
- User manual
- set of resitors and capacitors
- 1 pcs. 43E08
- 9v battery (fully charged)
- Hot air solder station
- Labtool48 made in china
- set of screwdriver
- set of additional connectors
- prepaid card with international roaming to use with any "handi" 900 and 1800 mhz (dualband) if have questions why not work after using tools included in package.
Box no need put in package since is sty cast aluminum and have life time warranty :)
Raskal, you are real Funny !!!MAN!!!:D :D
I fail to understand how you find so much time to write all this:D
Hams
Originally posted by er2000
still zuleah you have to agree
everyone has a problem with raskal even himself !
everyone that has EVER worked with him are all acused as cheaters...
forget him man
he sits in a little office with no trading to do
everyone walks away from him
i think on this forum a lot of people agree
Sandor, call Andrei Gheorge 13-14 and tell him this. If you don't know what is this ask "rahitic TED" the world's best 16-bit applications programmer.
I just wonder you was so quite all the time :)
Originally posted by Hams
Raskal, you are real Funny !!!MAN!!!:D :D
I fail to understand how you find so much time to write all this:D
Hams
I have no the time, but i have a XDA from O2 and unlimited GPRS transfer volume is here in China only 20 USD/months :)
This what i write here, i may write it some time in a funny way but in fact it is really a serious matter with the bugs in this EVOLUTION clip.
for me moto evo= patriot clip 2 that's all for acer model there are tons of free soft on the net for it.:)
*MaTeOoSh*
04-22-2003, 23:47
Originally posted by er2000
still zuleah you have to agree
everyone has a problem with raskal even himself !
everyone that has EVER worked with him are all acused as cheaters...
forget him man
he sits in a little office with no trading to do
everyone walks away from him
i think on this forum a lot of people agree
... I really don't know what everybody wants from Raskal ... That's really disturbing ....
... I really don't know what everybody wants from Raskal ... That's really disturbing ....
Yes this is the question? What? What he can offer to us last time?
Originally posted by *MaTeOoSh*
... I really don't know what everybody wants from Raskal ... That's really disturbing ....
MaTeOoSh, what they want from me? :) There are not so many, most of them distributors of EVO and of course my "old" friend Sandor (ER2000). He is like that and he will never change himself.
They only try close my mouth not telling the truth about this product and they try blame me but a real help and support they cannot offer at all. But what this people not understand, they are different people around the world wich bought this clip and they post here about different bugs, so no only one bug.
I know you and you know me and i want to say thank you for your support, man. :)
@ Spear: Spear this topic is about problems with EVO clip, you have this clip not on your page. So if you like tell me something open topic in OFF-TOPIC section or mail me.
You ask me what i can offer to you? Well, read this http://forum.gsmhosting.com/vbb/showthread.php?threadid=81902 and if you need one contact Andro, it is not so far from you and i have also other things but need mail me, i can't post it here since here is not sales section, sorry.
hey enigma-man where in my page is this evo clip, because i can't find it???
For sure i not need nothing from you. I can offer you much more. If you are interested - contact me. I am not like you(you remember?) - i am ever open for business.
DrMobile
04-23-2003, 12:12
TOPIC IS CLOSED!!!
DISCUSS Privately.
Best Regards,
Wahab