Strange problem with Chinese phones

[jollymolly]

i got two new K Series chinese phones.
one is Xinyuancheng K6+ with restarting problem
& other one is Xinyuancheng K9+ with camera problem
i have formatted both phones with ET box. now after formatting both problems are solved but phones say on screen " No licensed to produce " & when i insert sim card i get emergency instead of network name. i cant make & receive calls
when i checked the IMEI, it was changed to 335790246811220.
i clicked fix IMEI & wrote original IMEI from the sticker then phone started to show 2 IMEI numbers.
1st one that i wrote from the back of the sticker
& other one is 335790246811220.
after doing this i still cant make or receive calls.

then i read full flash from new working phone & wrote it in these phone but still same problem cant make or receive calls & " No licensed to produce " is still written on the screen.
here is the info :
phone type: CHIENSE MTK
phone version: GOLDDRAGON25_GEMINI_PCB01_GPRS_MT6225_S00_L176_V02 _DM_KXD_ST12832T3F2_BV6.BIN

Flash ID : 20C4
Flash Type : Thomson-16 Mb

Plz help ET Box Team.

& one more thing i m having this 2 IMEI problem with alot of phones.
i have formatted one sigmatel S88i phone few days ago. i got same 2 IMEi number problem with tht phone too. now only vodafone/hutch is working in tht phone. when i insert airtel/idea/bsnl sim in tht phone & turn on the phone, right after getting network phone shut down by itself but with vodafone sim phone is working fine.

plz Help ASAP.

[nonu_don]

thnx for a detailed feedback. i have understood your problem. the license problem i think is due to the caliberation data lost during the formatting. this cannot be fixed at the moment by ET-BoX. but i hope soon will support this feature to fix this.

about your 2nd imei problem, i will check what can be done and inform you as soon as posible.

Br.
Naman

[sneha]

i got two new K Series chinese phones.
one is Xinyuancheng K6+ with restarting problem
& other one is Xinyuancheng K9+ with camera problem
i have formatted both phones with ET box. now after formatting both problems are solved but phones say on screen " No licensed to produce " & when i insert sim card i get emergency instead of network name. i cant make & receive calls
when i checked the IMEI, it was changed to 335790246811220.
i clicked fix IMEI & wrote original IMEI from the sticker then phone started to show 2 IMEI numbers.
1st one that i wrote from the back of the sticker
& other one is 335790246811220.
after doing this i still cant make or receive calls.

then i read full flash from new working phone & wrote it in these phone but still same problem cant make or receive calls & " No licensed to produce " is still written on the screen.
here is the info :
phone type: CHIENSE MTK
phone version: GOLDDRAGON25_GEMINI_PCB01_GPRS_MT6225_S00_L176_V02 _DM_KXD_ST12832T3F2_BV6.BIN

Flash ID : 20C4
Flash Type : Thomson-16 Mb

Plz help ET Box Team.

& one more thing i m having this 2 IMEI problem with alot of phones.
i have formatted one sigmatel S88i phone few days ago. i got same 2 IMEi number problem with tht phone too. now only vodafone/hutch is working in tht phone. when i insert airtel/idea/bsnl sim in tht phone & turn on the phone, right after getting network phone shut down by itself but with vodafone sim phone is working fine.

plz Help ASAP.

write imie again .........if problem same then write backup

[samim_kp]

Sir,

I have Sigmatel S90. Problem with message opening and contact saving. It hangs. shows "saving"...... and message opening "unfinished". When battery removed and placed again, it switchs on and message can be opened and read and after 1 minute or so, it is all the same. By pressing Switch on it does not switch on. You have to repeat process like battery removing & placing again. Rest is okay. Any suggestion please help.....

Thanks in advance.

samim_kp
====

[nonu_don]

Sir,

I have Sigmatel S90. Problem with message opening and contact saving. It hangs. shows "saving"...... and message opening "unfinished". When battery removed and placed again, it switchs on and message can be opened and read and after 1 minute or so, it is all the same. By pressing Switch on it does not switch on. You have to repeat process like battery removing & placing again. Rest is okay. Any suggestion please help.....

Thanks in advance.

samim_kp
====

did u tried to format your phone? please format your phone and tell us your results.

Br.
Naman