Plz HelP!! :--(

[Saaduk]

Hi,

My sl45 had a problem of self turning OFF so som1 said that it is the hardware prob....He said that reflow the ic... i removed the ic and again fixed it but the phone is not turning ON..Plz help

ThankYou,

Saad:confused: :confused: :eek:

[robbiesl42]

Get anew phone...

[Saaduk]

good reply robbie

[krizzziz]

I dont know if this is a hardware problem or software really...
If your phone turns itself out it could be a software problem..
So try this...(if ya phone wants to connect....I worked with me!!!)

Try remove the battery, press the red button and restart the phone.
You can try to remove your patch with V_Klay.

Or you can reflash the phone entirely :

- flash with your eep-sl45.bin
- flash with fubu-fw56.bin
- open Ksie 5.1 (All siemens 5.1 by nutzo)
- Choose Your phone model
- Security -> Read phone map
- Security -> Write IMEI
- Enter your IMEI
- Click Change

And now if its a software problem you have a sl45 with the newest firmware and unlocked!

Good luck

[Saaduk]

I think its Hardware becoz while pressing the phone gently it switched OFF. what to do??

[Saaduk]

And also.... Does the battery indicatior problem occurs by flashing or not????????

[alianu]

you have to resolder the MCU and the power chip ... but do right couse the pcb is very thin
sorry for my english ...
same problem soved 2 month ago ...
regards alianu.

[luften]

@alianu

Exactly what problem did you solve with resoldering ? The battery problems? or just the switching off problem?

[Saaduk]

@alianu

any way to contact u 4 help online