View Full Version : Simscan6.00s doesn´t work
I have convert the File sim_emu_FL_6.00.hex with Simemu 6.00.cfg. After programming in the Silvercard, i become always "Sim card rejected". With SimEmu 5.00 it works fine! What do i wrong??
Thanks for help
Regards Youkoe
callinas
05-30-2003, 22:30
It hapens to me to, the problem is that the flash isn't right, if ou see when you program the card everything works fine, but if you see atently, you see that at a time appears , anything like , verifying 256 ... something like that, but you select 24c64.......
I think the configurator isn't working fine!!!!
Yes the configurator doesn´t work fine....i have testet and testet.....allways with the same configuration.....After 10 tests thr hex-file works......I dont know why.....but the card works fine....
best regards Youkoe
another "BUG" in configurator ??
if you select type Silver and don't change the file name you can't config Silver with default parameter ( valid for green card) but if you change the file to ENG you can config with this invalid parameters...
I did not succed to have an working Silver card with SE 6... all the time I have card rejected or inser card....
with SE4 no problem at all...
like MS sw: update to latest ver is not an good solution all the time...
L.
The configurator works fine.
The fields should be introduced in the screen order.
Each time the Suffix field is abandoned, the corresponding version file is read overwriting the previous values in the fields. Try with TAB key and you will see this effect.
For this reason, if you change the suffix and press Update, you don't modify nothing in that versión.
I'll try to advise, in the moment of update, if none change was done.
Regards