PDA

View Full Version : Simemu, please help me

crux
05-31-2003, 18:47
I bought simcard8 + sim-master at ucables.com but it came with version 4.10.

i have the silvercard and i want to know if it's possible to update it with sim-master (same as sim-amgic, i think)

if it's possible, plesase tell me how, becouse i couldnīt do it with your tuturial.

Please help me, ok?

thanks a lot!

crux_pt@yahoo.com
MeMoCan
05-31-2003, 22:36
simmaster and simmagic are not same... different companies, different products.
crux
06-01-2003, 11:41
ok. i have this one (check picture). i just want to know if i can update my silvercard with it. i have ver 4.10 and i want 6.00

http://ucables.com/img/pics/SIM-BACKUP.jpg


thanks

:D
MeMoCan
06-01-2003, 23:10
i know that, simmaster uses its special simcard. not silver, not java, not green, it is a special card. so...

if simmaster programmer supports flash and eprom writing - reading (must support eprom but dont know flash) you can program your silvercard with icprog software using simmaster programmer.
simemu
06-01-2003, 23:49
@crux
You can put the 6.00 version, but remember to configure the 6.00s type with the configurator, because the SIMCARD8 is a SilverCard.

Regards
crux
06-02-2003, 20:15
ok, but i made everything that came one tuturial at simemu.cbj.net and it stays just like it was, ver 4.10. it didīnt update. are u shure i can update my silvercard with sim-master i show in foto?

thanks for repling me
simemu
06-02-2003, 20:33
You can update the SIMCARD8, because it is a simple SilverCard, but you need a TE-20 for program the flash and a TE-21 for program the external EEPROM.

Regards
crux
06-03-2003, 19:46
ok. thanks a lot, but can u tell me what is te-20 and te-21?
sorry but i just started with sim cloning last day 24 of may. i'm new at this. thanks again
crux
06-03-2003, 20:10
hello again,
i found te-20 at http://www.electronicasuiza.com/flash/sp/index.htm
but where do i put my simcard? it hasīnt got any placa to put simcard on the prorgammer!!!!!

te-21 doesnīt program eeprom???

ok: i just want to update my silvercard to ver 6.00.
tell me where can i buy a programmer to do it thar is cheap.
i want it ready to program.

or, where can i buy the greencard2 pre-programed with 99sms?

thanks, one more time


PS: and how about this prorgammer?
http://www.ciberland.com/productos.asp?busca=TARJETAS%20GSM
simemu
06-03-2003, 20:34
You have to use an adapter.

The TE-21 is for extract Ki and to program the external EEPROM.

Nobody should sell products with SIM-EMU pre-programmed at this moment.

Look at here http://www.kandela.pai.net.pl/progs/en.php to obtain the card and programmers.

Regards
Alf
06-04-2003, 12:25
@simemu:

Do you have any advantage if I buy cards from them?

If so, please do mention so I'll pick them as a supplier :)
crux
06-04-2003, 19:47
ok, one more thing: i need to buy a te-20, an adapter, anything else?

thanks










hey, alf i am from portugal also. can we speak in portuguese?
not here at forum, of course...
crux
06-04-2003, 19:49
@simemu

one more thing, i thought ucables would not sell anymore of your simemu software, right?

i bought them lasy 24th may...
simemu
06-04-2003, 20:12
@Alf
No, I am not an affiliate of that shop.

@crux
Yes, I know. They are selling that product illegally, because our agreement ended the May-10.

See this post http://forum.gsmhosting.com/vbb/showthread.php?s=&threadid=87643 and make the comments there.

Regards
crux
06-05-2003, 00:56
i saw your post, and leave there my message
crux
06-05-2003, 00:59
oops, almost midnight
i better go to bed
lol
:)