View Full Version : who can tell me how to work clip
i have a panasonic clip the one which takes 4 aa batts and has three blue lights i press button when three lights flash i press power button on phone but no code appears or do i have to do something else
i know i have to do 746 ok ok to enter nck but how do i get that code please help
power on the fone and whilst it is booting up press the button on your clip, phone should show "test mode" then the codes will be displayed on the phone lcd.
you know the rest m8
thanks 4 reply i was led to beleive the other way round press button on box when lights flash power up phone but which ever way i try result the same phone dont go in to test mode i have one a14 ver gd 67 one older ver what ver do these boxes work up to and if it dont go to this new ver is symtom not going into test mode?
should do them ok m8. try a few more fones then if the same send back to supplier.
try this way also
Connect phone to cable(must be off!)
Put battery into clip and leds will
flash across the clip.
Power on the handset. "test mode"
will appear on the screen then dissapear.
After a few secs the unlock code will
appear on the lcd.
Write this down.
Put sim card in from other network and
type 746 and press scroll button twice.
This will show sim menu.
Type in the code.Phone unlocked.
Ok I sold my panasonic clip but this is how I did it.
Connect clip to phone
phone must be off
press button on clip
when second light flashes turn phone on.
after 1 second phone starts to display the codes on screen.
write these codes down on paper
enter 746 in phone keypad press twice down on joystick
enter the unlock menu and enter codes.
yer this one must be faulty its not going into test mode but is this what happens if the ver of phone is to new the ver i have is A14 should it support this version?.