PDA

View Full Version : Gd67 New (Mitsu flash)

valmo
06-04-2003, 14:47
Gd67 locked. New. Mitsu flash.
After use "GD67 v5.0c SPunlock" phone not work, only blink 3 times after press power button.
I maid with this prog many phones. Good work. But this phone have trouble...
Unlock and Write Imei in "GD67 v5.0c SPunlock" not work.
WinMoDo can flash, but any time "Error CRC" at end.

Anybody have solution how repair it?
Syed
06-04-2003, 14:56
upload all the 3 components BOOT+MAIN+LP...ur crc will be okay
Angello
06-04-2003, 15:32
The crc would be ok perhaps?
But the portable leave after?
Look old post and you will be able to see that if you removed the battery your telephone is died, except if you has a station has hot air and much patience and chance.
valmo
06-04-2003, 17:34
My stupid error.
Check boot need too. No need language.
@syed - thank you!
Angello
06-04-2003, 21:26
@Valmo

You flashed GD67 with boot + main?
Result?
And batterie was removed or no?
valmo
06-04-2003, 23:24
My phone always can be reflashed (not totally dead).
I flash boot+main and checksummes ok.
mr_x4you
06-05-2003, 12:10
This is new version of GD67, can't do it with Spunlock free program, only by logs !
te
06-05-2003, 13:14
Not only by logs, but not with cracked soft.
mr_x4you
06-05-2003, 13:21
Of course, of course ! I meant for unlocking only one phone