View Full Version : Real A55 Test point to use with Ksie2!! Tested!!!
gsm flying free
07-08-2003, 23:23
Test point to use with Ksie2!!
Tested 100%!!!!
You can see it in www.unlockeasy.net
Also how to unlock using Ksie2.
That's for a long time (aprox.10 days ) info from www.spunlock.biz . If you download A55 direct unlocker , you have same pic in file with them .
...but that variant for me worked 100% on A55 v.05 and A55 v.08
Also , i use SPUNLOCK direct unlocker for unlock them . Ksie is probably safe solution but i'm not try them .
We all need to share info .
WBR ,
Benjamin
jeremias33
07-09-2003, 01:20
I I guess this is a fake
there is no wire beyond the green on board at this specific place
:-)
gsm flying free
07-09-2003, 11:33
Is not a fake.
This solution is tested and works fine.
regmwesiga
07-09-2003, 14:47
Dear Benjamin
Can you tell us if you find any wire as per diagram, I scratched this area but when I connected it doesn't respond. Is this Versions you mentioned has this wire? Why the Test Point is different from one to another? For Martech Software Test Point with 5v can I use 4.5v for Spunlock Software?
It seement this way of cutting is diffult, there is no anydody to find the simple test point
very simple test point on a55 i do it normally just cut little bit like on diagram work 100% tested and approved .
nb: this test point don't work with martech .
osvaldas
07-09-2003, 21:39
This picture is not new, it allready existed long time ago, when most people didn't know anything about A55 unlocking. I think it's better then Maxfron's, easier to access the track and works 100%.
p.s. forget about Martech's test points
:D
Leslie_B.
07-09-2003, 23:16
This is ~2 month old solution...(for me)
Thx to Mark!
What is thist:
"I think it's better then Maxfron's, easier to access the track and works 100%"
Where?
BR
ALRU
Greekoff
07-10-2003, 21:53
Hi to all.
Strange, i have two pictures of testpoint. One of them pdf file from Max, another gif from spunlock. I cut line like the pdf file from Max and i get nothing(ksie2 say no bootloader, sftware from spunlock say error). And what i think about it, in pdf file pictures of old c55 phones, becouse they have resistor. A55 havn`t same like new C55. On picture from spunlock phone haven`t resistor, but (may im stupid) i didn`t see any line or something like this to cuting. So can anybody help me to see there is the f*****g point. I send the pictures.
10X
You need to scratch at this place until you see metal [gif from spunlock]
B.R.
I've tested Spunlock testpoint(A55 v5) & looks working: Ksie 2 reading flash (select C55) & direct unlocking; martech 3.0 cracked, reading eeprom & firmware.
Regards
i need help regarding this.
what to do with this test point.
tell me the schematics for a55cable.
i dont have c55 cable.
i have only c25.
can i use this schematics for c55.
please help me regarding a55 unlock.
working 10000...%
test by me
no 5v
kingofcellulars
08-23-2003, 12:41
Can i just leave the testpoint cutted or join it back spunlock test point
Mobile Lab
08-23-2003, 13:55
@kingofcellulars
No problem if u leave testpoint cutted.
u can use ur phone with this position also .
Thanks n Regards
Who use CUT test point - remember you don't flash phone next time.
When you again connect cutting place - flashing will be O.K.
I try this on A55.
brinki
Yes spunlock testpoint works well as whenn i remowed resistor in old types.
Nhatcuong
08-26-2003, 06:23
But cute mainboard to make test point very danger, I have 01 A55 die after do this solution.