View Full Version : crusader
hi after flashing avr t200 dead crusader write bad resp1 and dont flas phone . Help plz to resolve problem
Hi...I have the same problem on T68i. I get all these different boot errors. But, sometimes boot is ok...but then fails on second boot loader....etc etc
How to solve this?
Many Thanks
BR
Yasser
Hi i solved problem and my phone work now what system on your pc
Drug_Store
07-28-2003, 04:46
Originally posted by Yasser
Hi...I have the same problem on T68i. I get all these different boot errors. But, sometimes boot is ok...but then fails on second boot loader....etc etc
How to solve this?
Many Thanks
BR
Yasser
Are u using a fully battery charged? I mean really full...
Hi Guys...
I am using my Dell Laptop for this. I have win98 SE installed and all other appslications are working perfectly. The cable is new and have had no problems unlocking Ericssons like T610. The problem is flashing Ericsson phones like T68i. The Boot loads ok most times but after few mins.....get errors of different types of 'Boot Error's...all sort.....My T68i is now dead. :(
@ alex... How did you solve this?
Many Thanks in advance
BR
Yasser.
@ Drug Store.....The battery is almost FULL :)))
Initiating boot... BOOT OK
Flashing mcu software...
using file: C:\Program Files\Nokia\Phoenix\Crusader\Crusader104_Structure \Crusader\sonyeric\t68i\T68i_EMEA2_R7A013.sbn
!
bad resp 1
Mostly, flashing don't work under Win98. I'm use Win2000 for flashing. Also flashing works under XP.
Drug_Store
07-28-2003, 13:30
Originally posted by Chuk
Mostly, flashing don't work under Win98. I'm use Win2000 for flashing. Also flashing works under XP.
Yes the problem seems to be the Windows...:rolleyes:
Hi,
Thanks Guys for the help....Now I will try it on Windows XP machine. I am sure it will be fine coz u guys have already tested it.
Many Thanks again
BR
Yasser.
If your PC's CPU speed is less than PIII 800 and using Windows98se,
there will be some problems, try Windows XP or Windows 2000.
Cables
cables_cn@yahoo.com.cn
long time ago i buy all extensions for griffin, all except this crusader is perfect, but crusader is very poor product, usefull only for unlock, for flashing many troubles,specialy with r600, evry phone will be dead after you try to flash it!!!!!!!!!
and no way to wake up becouse phone is damged , hardware destroyed !!!
many problems with crusader any version, this software must be upgraded evry day to remove all bugs, i think all costumers haves
problems with this buggy soft !!
i speak few times with owner of this project, but always he say , problems will be solved, but now i have in hands few dead r600 with no possiblity to wake up without repair hardware !!!!!!
phones is good, brand new before flashing!!!
also many problems on entering test mode on all ericssons, i try on 5 pc-s, with speed up to 3 ghz , always same problems, so
problem is in bad soft, i hope in next versions bugs will be removed and write gdfs option will be aded .....
:mad:
Originally posted by skep
for flashing many troubles,specialy with r600, evry phone will be dead after you try to flash it!!!!!!!!!
and no way to wake up becouse phone is damged , hardware destroyed !!!
:mad:
I flashed few R600 with Crusader and no problems for me. What You talk about hardware destroyed????? Don't scare newbies here :D . R600 model - is piece of sh.it at all. I saw many phones, which dead after first powering and absolutely new. Some dead after 2 or 3 days using.
Chuk are you rait ,it is a bull st about hardware destroyed .Grifin no so bad
@skep
it would better to purchase SE-Fighter (or if you are idiot : DIV) to service SE phones...
Originally posted by VsH-GsM
@skep
it would better to purchase SE-Fighter (or if you are idiot : DIV) to service SE phones...
@skep:Yes,you must lose your mind if you buy something from Zulea(DIV)
@VsH-GsM:Good work man;)I like your UST:)
SE fither now is the best solution for se as ust for samsung:)
OFF - who is the original author for UST?
and the name?
i just wonder...
:D
Originally posted by Yasser
Hi Guys...
I am using my Dell Laptop for this. I have win98 SE installed and all other appslications are working perfectly. The cable is new and have had no problems unlocking Ericssons like T610. The problem is flashing Ericsson phones like T68i. The Boot loads ok most times but after few mins.....get errors of different types of 'Boot Error's...all sort.....My T68i is now dead. :(
@ alex... How did you solve this?
Many Thanks in advance
BR
Yasser.
I got same problem on a Win98 pc, but on the one i have XP all was ok.
Windows 9x/ME are crap.
Application programming interfaces are very poorly implemented (compared to Windows NT/2K/XP).
mr_x4you
08-05-2003, 12:14
Originally posted by VsH-GsM
@skep
it would better to purchase SE-Fighter (or if you are idiot : DIV) to service SE phones...
Hmm, it seems I'm an "idiot" ! :D
Originally posted by mr_x4you
Hmm, it seems I'm an "idiot" ! :D
Do not interchange implication with equivalence...
If every idiot buys DIV, does it mean that everybody who buys DIV is an idiot?
If you buy DIV, it does not mean anything.
Contrary, if you don't buy DIV, it means you are not an idiot.
...just simple statement logic... ;)
I am a mathematician, sorry. :D
PhantomGSM
08-05-2003, 14:42
well then lead its either 1 or 0 :) as i am logical
WBR
...search for fuzzy logic then... ;)
(and move to offtopic)
fontelense
08-05-2003, 17:34
Itīs going offtopic, indeed. But, with Lead being in Heisenberg land, thereīs always a "Quantum" reality in here. As long as energy barrier is not infinite, things are always possible, so no more 1 or 0 logic, but between...
Anyway, back to topics issue, someone has said that he has killed several R600 with Crusader, just by trying to flash. I donīt have Crusader, but I came upon the same situation, some R600 killed in trying to flash with DIV6.2. Any way of recovering them? Perhaps changing the flash chip, or some similar solution as for Motorola T191, with Makona's procedure?
best regards
Hello man about dead r600 after flashing contact with Skep he said what he have solution for dead r600, his concept is :r600 have bad hardware and when you flash impuls kill your phone
R600, T100, A3618 have "bootcode" in flash.
Originally posted by skep
long time ago i buy all extensions for griffin, all except this crusader is perfect, but crusader is very poor product, usefull only for unlock, for flashing many troubles,specialy with r600, evry phone will be dead after you try to flash it!!!!!!!!!
and no way to wake up becouse phone is damged , hardware destroyed !!!
many problems with crusader any version, this software must be upgraded evry day to remove all bugs, i think all costumers haves
problems with this buggy soft !!
i speak few times with owner of this project, but always he say , problems will be solved, but now i have in hands few dead r600 with no possiblity to wake up without repair hardware !!!!!!
phones is good, brand new before flashing!!!
also many problems on entering test mode on all ericssons, i try on 5 pc-s, with speed up to 3 ghz , always same problems, so
problem is in bad soft, i hope in next versions bugs will be removed and write gdfs option will be aded .....
:mad:
Hi Guys again....
I finally fixed my T68 with Windows 98 SE on another machine. Yes, I can confirm that Windows 98 SE on my other machine flashed the T68 correctly. However, unfortunately, we dont have a GDFS write feature in flashing, I noticed that on one T68m, the WAP and few other menus were frozen. In other words, I could not access them. I had to reboot phone each time for this.
But because there is no GDFS write in flash, the phone wont be able to access WAP etc, which is a BIG DRAWABACK.
I have written to the authors and have reqquested immediate implementation of this GDFS feature. Well, Lets see what happens in the next update.
So, now you guys must be thinking...how did I fix the WAP??? Well, I used the free offer by this gsm site the other day and sorted all the T68 phone I had.
Anyway...enough said for now. Griffin is still a good box all around :))
Take Care
BR
Yasser
Originally posted by Yasser
... I noticed that on one T68m, the WAP and few other menus were frozen. In other words, I could not access them. I had to reboot phone each time for this.
This is because the ARM flash contains incompatible firmware or was flashed faultily.
@ Lead
Thanks but I tried few flashes...but same result.........I suppose you will say.....'that they were ALL containing incompatible firmware' :) :) :) :)
Thanks anyway
BR
Yasser
I cannot make any conclusion, because I simply don't know Crusader. Never used it, never seen it, but heard of it. :)
@ Crusher
;);););)
@Lead
What about R1L unlocking ??
Originally posted by Trondo
@Lead
What about R1L unlocking ??
Good point!
Already done - together with IMEI change and full IMEI/SP-zone rebuild.
Just finishing 'cosmetic details'.
Originally posted by crusher
OFF - who is the original author for UST?
and the name?
i just wonder...
:D
Hehe..
!!!TaaTTalTi!!!
08-06-2003, 12:20
t610 new model unlock crusader work or not work!!!!
pls help me!!!
Hy i have last crusader and cable hand maded...it is working on unlocking t66-t600...but nothing else works...I tied on
Intel PIII-667MHZ OS 98SE french
Intel PIII-667MHZ OS Millenium french
Athlon XP-1800 OS Window XP eng
Athlon XP-1800 OS Millenium french
griffin plastic registered last personal update for crusader inside...
So what i did wrong???
[QUOTE]Originally posted by opo
Hy i have last crusader and cable hand maded...it is working on unlocking t66-t600...but nothing else works...I tied on
Intel PIII-667MHZ OS 98SE french
Intel PIII-667MHZ OS Millenium french
Athlon XP-1800 OS Window XP eng
Athlon XP-1800 OS Millenium french
griffin plastic registered last personal update for crusader inside...
So what i did wrong??? [/QUOTE
You mean oter phone types not work or on other PC don't work?
To opo ,man Grifin then unlock work perfectly in win 98,Milen ,Xp no problem in system then unlock ,maybe in pinout or you dont conect well
:p
if you want to flash phones, use crusader 1.03 and downgrade yours grifin with olders gps file, newest gps support t610, but very bad works with flashing and unlocking other phones, i haves same problem before when griff kill some my r600 phones, but i solove problem with flashing after i downgrade griffin firmware for crusader to older version, now i can flash phones without problems and when need to unlock t610 just upgrade box with new gps file, try this what i say and you will see it works fine !!!!!!!!!!!!!!!!!!!!!!
new version of crusader is still very buggy, so use older version and no problem for flash phones except r600, and no try to flash r600 !!
some r600 flashed ok, but some killed forewer
that is it !
:))
:confused: