View Full Version : MARTECH + ksie = killer
this is my story :eek:
i have C55 need to unlock :p so i use martech soft :(
the program said phone unlock OK but:mad: the phone said worng softwear ?????? so i try to change the IMEI :D the program said ok but the phone said nothing THE PHONE was dead
ammmmmmmmmmmmmmmmmmmmmmmmm now i go to ksie soft
i try to flash the phone with flash file that i read it from anuther mobile .................................................. ...............................finsh flash:p
now the mobile when i press power button it flashing LED only.
any one can help ???????
sorry for my bad english
b/r
ALI
PhantomGSM
07-30-2003, 00:31
Read old posts on this subject
Regards
Winner58
07-30-2003, 00:34
you can repair imei with KSIE_new!!!
this should solve your problem!!!
i thing the problem from the imei coz if i try to change the imei using martech soft it's show EPRROM IMEI ??????????????1
CAN I REPEAR THAT
@Winner Where is ksie_new???What is difference in ksie2?? thx and regards
Friend and what about Dongle for Martech sw, he? If you using cracked sw, then you have dead Phone. Martech sw cracked ist only for flashing, or no? If you want unlock your Phone with this sw, then buy the Dongle and then you have support from Martech Team.
Excuse my English :-)
BR
ŠaryK
Winner58
07-30-2003, 01:04
with KSIE_new you can unlock and make *.map by yourself!!!
@ seeboy
flash your phone and write eeprom after that make map with ksie2 your phone should work 100%
rambo amadeus
07-30-2003, 01:15
If you have C55 with"wrong soft" mail me priv. I will send solution for this.
fontelense
07-30-2003, 02:34
The real problem is that you really don´t have a clue of what you are doing.
Anyway, solving that is easy, flash another eeprom from a working phone (with martech soft or others), then read log with Ksie2, calculate the map from log and put it into the phone. Read old posts for detailed info.
Afterwards, sell cables and quit unlocking...
Best regards
debeliamark
07-30-2003, 07:43
Just make a "search" in forum... this is not so hard to make it
The Racer
07-30-2003, 11:34
KSIE_2 it's great and free too. No need for other soft.
@SeEbOy: Why do you need kSie2 if you have a Martech box?
If you do NOT, then why the hell did you try unlock with
cracked Martech? Open you eyes and READ old posts
before blaming around a - otheriwse GREAT - tool.
FractalizeR
07-30-2003, 12:57
Don't tell that Martech is a killer if you use cracked version!Cracked version of Martech without box can't unlock and repair IMEI, only flashing and EEPROM writting.... Moreover, you can't change IMEI in a phone without changing flash chip. It's impossible, because IMEI is in OTP zone in flash. Moreover, if you write flash by Martech or KSie you have to match flash chip type against flash file chip type. They have to be compatible.
Better use WinSWUP flash, if you didn't cut the track.
hi
i have try all method ( i flash the mobile with ksie + winswup )
now
when i press pwoer on button the mobile only flashing lighit.....
is maping can solve this problem???????????
best regard & sorry for my bad E again
ALI
yes
try to repair your phone with map
Just use the full flash from www.gsmschwantz.com (http://www.gsmschwantz.com) ... write it from 00x800000 with Ksie Full.. . after that use Direct unlock no map is saved button... write your imei and press ok... thats all
FIRSTLY U R DOING WRONG THING MARTEC CRACKED IS A FLASH TOOL ONLY NOT FOR UNLOCKING NOW UR IS DEAD SO READ FULL FLASH FROM ANOTHER WOKING PHONE WRITE IT INTO THE DEAD ONE AFTER THAT CHANGE IMEI IT SHOULD RESURRECT UR PHONE
i alredy do that i download flash from http://www.gsmschwantz.com
and flash the phone and unlock it but the phone have the same problem but ther is another problem that is the mobile have defrent IMEI i try to change it but i can't
what soft i have to use to change the oregenal +eeprom IMEI ?????????
thanks
yes you have not imei original from inside the phone you are using imei from cover,and they are not same, or maybe you have damaged area for eprom in flash.
fontelense
07-31-2003, 01:28
for restoring eeprom imei with original, you can use Maxim's soft. Again, read old posts...
Use Martech crack v3.0 Flash full + eeprom (readed at good phone ), change imei
Use Ksie2 create log from phone, create unlock map from log, load map to phone
I'm tested work fine
where can i fuond Maxim's soft coz i thing i damaged EEprom area
the oregenal IMEI is deferent than the EEprom IMEI also EEPROM IMEI is ((((( LOCKED )))) sume time licke this ?????????????"1
any one can help me
soory for my bad english
b/r
ALI
thanks to all my problem solved by ksie ................... thanx again
with my best regard
ALI
Ckeck your mail, hope it's useful...
Greetz,
cadi ;o)
Oops, too late... I was looking for some help so I didn't see in time you already did it :)))
c.
thanx for ur help cadeeja
I flash my 2128 phone with Ksie & Martech3.0 flash fls&bin format file!It don't phone on!Use Ksie2 create log from phone, create unlock map from log, load map to phone,or use Maxim's soft write EEP,both no phone on!Why???????????
Excuse my bad English!
Hi Sinta!
Forgive me for asking, but did you change IMEI in log before creating map out of it???
Greetz,
Cadi ;o)
Edit log in text, change imei and creat map in changed log
@Sinta
It's not that I haven't asked if you did, or am I wrong... *sniff* :(
It's only: If I would have said change IMEI and so on and you would already have tried it that way I feel bad because you might think I think you're dump ;) Therefore I asked you first... I'm too polite for this world ;););)
So, don't thank me by mistake :p :p :p
cadi :D
@cadeeja
No no no........ !I am sorry!Thank you too!I haven't this mean!
Thank you again!
Sinta
Was with three ;) & :p
Thank you for thanking me too :) :) :) *rofl*
cadi ;o)
Hi All my friend...
I have problem with C55, LCD blank but call in and out normal...
I try to change with new LCD and still blank...
What the problem? Software or Hardware? I try to flash with new version and still like that...
(I have two C55 like that)
Please give me solution...
Sorry for my bad english... ;)
Thanks
B.R
Eriko
www.groups.yahoo.com/group/eriko_gsm2002
Originally posted by eriko
Hi All my friend...
I have problem with C55, LCD blank but call in and out normal...
I try to change with new LCD and still blank...
What the problem? Software or Hardware? I try to flash with new version and still like that...
(I have two C55 like that)
Please give me solution...
Sorry for my bad english... ;)
Thanks
B.R
Eriko
www.groups.yahoo.com/group/eriko_gsm2002
Try to write full : flash and eeprom readed another good phone
HI SUN....
It's still blank lcd....
I try to upgrade and downgrade version but still like that...
Thanks
B.R
Eriko
http://www.groups.yahoo.com/group/eriko_gsm2002
u need try write eeprom too
@eriko
Hi!!! :)
Did you do full flash or partial???
Last time I flashed c55 the display was very very bright and first I thought there would be s.t. wrong, but I changed contrast and it's okay now...
cadi ;o)
Hi All...
Thank You Very much....
I use full flash my friend...
Thanks
B.R
Eriko
www.groups.yahoo.com/group/eriko_gsm2002
were do i get this ksie software from and willit work on sl55 for changing the imei,and is there any tutorials on how to do it ?
Hi Friend...
U can get that file from my group....
Thanks
B.R
Eriko
www.groups.yahoo.com/group/eriko_gsm2002