3650 Phone Failure [Archive]

msas

08-07-2003, 19:02

I've managed to flash many 3650's with total success

but this ****** last one after I've flashed It with 2.50 the phone gave me the message:

Phone start-up failed. Contact the retailer

I've tried to flash it with different versions invain

can any one help me work arround this problem

best regards

Syed

08-07-2003, 20:56

if u have griffin then flash with "full factory reset" selected...and after full factory reset this problem will go....

WBR
Syed

msas

08-08-2003, 09:39

Thnak you

but I've tried that invain and I'll try it again

I'm always flash with full factory reset selected

regards

Burnt Cobba

08-12-2003, 16:50

just had a 7650 with same problem.

@msas
flashed it and did factory reset after that and all was ok.

Problem is when the nokia logo is jammed at the start. That i have no idea what to do.

br
al

speed

08-12-2003, 22:56

You need to format UI, but if still not resolve your problem, it might be a hardware problem :(

speed

08-12-2003, 23:00

For Contact Retailer Problem, just use 3650 cable modified with 3.3k resistor between BSI line inside connector. Then just use latest Griffin and use "Special Function" -> "FFactory Set LM", normally it will show "FFactory Set LM .........Failed", don't worry, just repeat it 3x and all will be OK.

msas

08-13-2003, 17:49

Thank you

kingofhearts

08-13-2003, 18:49

Does it works?

a4tech

08-14-2003, 16:55

i tried what "speed" recommended...it didnt work either..am using a modified cable for 3650....using v1.99

Khayyal

08-19-2003, 19:19

try to use prodigy and format the user area then full fuctory settings
I tried it it is working 10000%
:)

GSM_HACKING2003

08-22-2003, 02:24

just try to format user area in griffin

Allen

08-22-2003, 10:26

Solutions tested with speeds idea..

essojay

08-22-2003, 10:36

hello,

pls where are the files tobe used for speed method,....anyone with the link???/

Thanks

BR