View Full Version : Sendo Unlocker By ANJELGSM
@ANJELGSM
Your software is 100% working, I tested on phone blocked unit.
Can you give me the list of Supported Phone Models in this Soft?
Great work and more power.
Have anice day.
Best regards,
LogoMan
I just try to unlock whit this s/w sendo P200 but don't have luck always error when I try to coonnect. I try whith T191 cable. Maybe someone give cable scheme for this tool?
anjelgsm
08-18-2003, 22:02
Yes my software was working 100%
And support all models and versions
But Also clone imei....
Use this at your one risk...
Regards
AnjelGsm2003 Inc.
ALL WHAT YOU NEED ABOUT SENDO CABLE:HERE (http://www.sws-2k3.com/sendo.htm)
@anjelgsm
Thanks mate keep up the good work & for sharing your soft.
Have a njice day.
best regards,
LogoMan
To AnjelGsm.
My phone Sendo P200 is permanently blocked, there may be because of it it(he) does not want to be connected to this program. I tried to connect a cable from T191 and to the points (Rx, Tx, Gnd) which are taking place behind the battery, but it is unsuccessful. AnjelGsm you may will prompt as to remove permanent blocking from this phone.
@ YAK
Is your cable has 4.5volts supply? Use regulated power supply.
Hope this will help you.
Have a nice day.
Best regards,
LogoMan
you can use cable even without power supply...just use original cable of motorola t190...
i even unlocked and removed blocked phones using t190 cable and of course ANJEL's software...
thanks to you ANJEL...Keep up the good work
where I can download AngelGsm software.
Thanks.
@AUES
Just use search button and you can find what you need mate.
Best regards,
LogoMan
link: www.psg.neostrada.pl/gsm/_new_SendoUnlock.zip
hi i need sendo m550 pinout help me.
thank
yes i tested m550 and p200 s200 %10000 WORKING
could anione help??? need to know if this software runs under win2000? And the m550 pinout mani thanks...
!!!TaaTTalTi!!!
08-29-2003, 17:11
sendo s200 anjelgsm soft press unlock 1 hours wait unlock phone
not working!!!!
pls help me!!!
not work on S200 i have 2 pics, both same error
ignition ok
read simlock..................
error
What to do ?
PLEASE HELP
do it over again and it will work....
i have question... how about if IMEI is ?????????????....
@blutac
Use the appropriate tool :) Free cheese itself know where.....
Best regards :)
helo i have problem i cant conect sendo with AngelGsm soft i test 190 cable , cable with external syply what i do wrong .I see s200 and m550 no problem for tjis soft help plz
Siemens man
09-09-2003, 20:08
use pin out, inside pins. open battwery
Guys write plz how to conect sendo
can i use motorola 191 cable for sendo with 2 point behind
unable to unlock s230 with t191 cable.
please anyone can help me
@Angelgsm
Thanks for your Great work, tested all Sendo with your software and my cable, Great work man!!
is possible to make cable withe universal box from gsm-technology
@ yaya
It is possible, Universal Box is 100% compatible all third parties software.
Have a nice day.
Best regards.,
LogoMan
To BOZAN,
You did the SENDÔ M550 with same cable of S/P200?
And with same "soft" of "anjelgsm"?
Thanks
Regards
:confused:
hi i tryed to unlock a sendo s200 with angel gsm soft and then it gives me teste da sendo and then permanently blocked could someone help me?
Tenta outra vez e verás que dá!
Try another time and you will see that will be OK!
Cumprimentos
Regards
@Angelo
Hi!! I tried unlocksendo S-200 with you soft v 1.00!!!
i use rx,tx, ang gnd but programm dont reed sim code
Waiting for ignition ...OK
Start Time : [12:34:14]-[15.09.03]
---------------------------------------
Read Simlock's ...... and i wait about 30 minits its read 0-100%
again and again but not result!!!
Please help mee wtatb can i doing,,,,,???
Thanks
!!!TaaTTalTi!!!
09-15-2003, 10:50
yes not working wait wait !!!!
:mad :mad
antune but i have done it suceffuly after but phone still the same
ChelasGsm
09-15-2003, 11:36
use griffin ou loguer online it remove permanent block for m550 use esternal power whit crd griffin
it is ok now it was the battery low 9v, but the program still read and write simlock. if anyone haves same problem try to change battery, chelas thanks anyway
http://cepforum.com/gsm/misc2.php?action=download&attachmentid=543
Siemens man
09-16-2003, 19:54
thanks for soft
@Angelgsm
Thanks for your work, I tested 3-S200 and one M550 with your software, work good!!!Great work man!!
does the soft work on sendo d800?
thanks
Dr_Gogeta86
09-18-2003, 23:44
but to upgrade soft of s230
Had anyone unlock a Sendo S 200 with a F/M bus cable?
But now say me the true, because i wanted to do that, and it don`t won`t. please, can anyone help me, with a complete instruction ?!?!?!?!? I need help !
:confused: :confused: :confused:
thanks to all !
Guys explain me something: How do you connect the t190 or 191 cable on to a sendo m550 inside pins??
thanks in advance!!
You can't connect the T19x cable to M550 because it's not possible!
I bought a cable in ****** for S2xx and M550 and it's OK!
Very important: the batery allways with maxim charge!
Regards
worked 100% with 3 s200 (3 pin version) one of them was perm. blocked.
i used my universal box with 5 v flash supply, selfmade cable ( connected 3 wires on an alcatel bf cable, i used screws for the rx and tx contact - i was to lazy to open the phone)
the right connection is shown by the uni box led´s (rx/tx)
phone unlocked in a few seconds - if it takes more than 10 or 15 seconds - forget it, check the cable
i wait 50 min and nothing
what happend?
No result here.. Do you have to put some current at the test point maybe if it exists on the phone :confused:
mtony969
10-09-2003, 20:10
Has anybody a link to buy cable for m550 please
M550pinout
__________________________
I.... tx ................... rx ........ I
I.....*...*.. ............. * ........ I
I........................................I
Plz could some1 post how to unlock this Sendo? I have the motorola cable, had a self made cable, both dont work. I get the error..
I connect the cable to com 1, put a battery on the phone, no SIM, when it asks for ignition I press the power on button shortly, phone switches on and the software says ERROR...
What am I doing wrong :confused: :confused:
Hy i need pinout for sendo d800.Thanks
Kind regards
http://forum.gsmhosting.com/vbb/showthread.php?s=&threadid=96446&perpage=5&highlight=&pagenumber=17
JOHN2003.
11-15-2003, 20:57
will this software unlock a sendo s330 and will my standered t191 cable do it or will i need external power going to my cable!! if the t191 cable wont do it will my philps savy cable(which has external power) do it.. tks
Originally posted by artika
M550pinout
__________________________
I.... tx ................... rx ........ I
I.....*...*.. ............. * ........ I
I........................................I
Are you shure this is correct... On Spears website he gives this pinout:
__________________________
I.......................................I
I......... rx ............. tx ........I
I.....*...*.. ............. * ........I
I.......................................I
mtony969
11-18-2003, 14:05
On spear s website it gives a photo to but is anybody doing the cable
Eldo2000
11-19-2003, 12:51
Worked OK : Sendo M550 and T191 cable.
Phone unlocked in a few seconds.
Thanks ANJELGSM !!!
----------
Waiting for ignition ...OK
Start Time : [13:39:02]-[19.11.2003 ă.]
---------------------------------------
Read Simlock's ...... Done.
Calc.SimLock's ...... Done.
Prepare Simlock's ... Done.
Writing Simlock's ... Done.
---------------------------------------
Phone Unlocked OK .
End Time : [13:39:07]-[19.11.2003 ă.]
All Done .
----------------------------------
Dear friends i urgently need your help! I've unlocked sendo s200 with the programm, imei number changed, phone unlocked, but no calls. I think the only reason is registered to network another phone with same number! Help, programm changes it to the same number - xxxxxxxxxxx7784 always i do unlock.
regards
Schrifti
11-20-2003, 11:13
@ dimon I´ve got the same problem phone will find no network after imei changend .Anjelgsm does not reply mails too :(
and only delok software able to change IMEI?
Schrifti
11-20-2003, 17:16
as I know xak got software too .
i downloaded software and when i am trying to unzip it is asking username and password please help me
thanks in advance
Gsm Solutions Ltd
11-21-2003, 22:43
Please post link to this great soft.............
OK, in the end, which is the correct M550 pinout... I haven't tried but would like to know in case I got one...
Schrifti
11-24-2003, 10:16
@spalato what for ?Soft clones Imei and will not find network i´ve got a lots of them destroyed imei ............and there is no solution for free to repair .
what about unlocking Sendo S330 , any ideas ?
thanks
*MaTeOoSh*
01-12-2004, 10:27
@spalato - spear's pinout is OK, tested ...
garcea10ro
01-12-2004, 20:41
tested on m550 unlock ok
link for soft http://www.unlockeasy.com/modules.php?name=Downloads&d_op=viewdownload&cid=57
Hi guys,
I wonder if you can help me with unlocking Sendo S330 , i will through it in the bin if i got no answer. i have been like a week on the web until 4 am trying to unlock it , pleaseee help
heba
OK! I tried some SENDO, and OK!
But there is a problem: it changes IMEI!..............
OK, in the end, which is the correct M550 pinout... I haven't tried but would like to know in case I got one...
This confuse me also: From SwS page is 1=ground 2=rx 3=tx.
And some people say T19x cable works :1=ground 2=tx 3=rx.
I don't undertand .
BTW I tried all 2 cable on my M550 but can't even detect the phone , always " error ".
Please give me assistance.
u have to cut cable and soldering the cables into pcb also u need 9v power
@anjelgsm
plz i have sendo D800 blocked ??
Gsm Solutions Ltd
02-07-2004, 19:26
M550 pinouts needed :p
M550 pinouts needed :p
http://www.gsmhacking.com/help/cables/sendo/m550.jpg
tested 100%
br
Gsm Solutions Ltd
02-08-2004, 14:28
@AXEE
Please post details of what cable(t191)??,and how you used theses testpoints...
@AXEE
Please post details of what cable(t191)??,and how you used theses testpoints...
There are standard TX-RX-GND cable scheme:
http://www.gsmhacking.com/help/cables/motorola/T191.gif
Modification: use 9v battery, wire bat + to Vin of 78L05 and bat - to gnd.
TX, RX from this scheme wire to TX, RX pads of Sendo M550, wire GND from scheme to phone GND ...
br
@Axee..
IMEI changed after unlock..?
WBR
Surej
@Axee..
IMEI changed after unlock..?
WBR
Surej
If I used Angel imei was changed, if I used Griffin CRD imei wasn't changed.
But in some cases CRD doesn't repair m550, so Angel repair but with imei cloning ...
br
Unlocked Sendo S200 with this software but phone now useless as the IMEI has been changed. The IMEI function in this software is not operational does anyone know how I can put back original IMEI.
Author of software does not reply to emails, I wonder why?.
If anyone know how to put back original IMEI into this phone please contact elite13@hotmail.co.uk.
If anyone know how to put back original IMEI into this phone please contact elite13@hotmail.co.uk.
Only with a box!..........
Regards