i flash the phone format and phone is ok for 10 minutes then again contact retailer i flash whit the last version

any trick to clear this probleme many tks

can u use erase.bin / erase flash & flash agine
or chaina flash if the firest way not help you .

Simple Solution for 6600 "Contact Retailer" and 4Binks using Twister, UFS Software

Step 1: Click ERASE Flash
start address: 02000000
end address: 027FFFFF

* if you get an "Erase Flash Error" message in a specific address in the flash
ic, this means that you have a damaged flash IC. You will need to replace
flash IC number 2 inside the phone. (The 6600 has 4 flash ICs inside).


Step 2: If you are successfull in erasing flash IC number 2, make a full flash
of the phone... MCU + PPM + Bluetooth if necessary.

Step 3. If you are successfull in full flashing the phone, put battery inside
phone and you SHOULD GET "Contact Retailer" message again. Now remove
the battery, put it back and hold buttons
"call(green button on the left)" + "*" + "3"
then press the power button while still holding the 3 buttons above...

The phone should start formating itself (note that there must be no sim
card inside the phone while doing this...)

After formatting, phone should be ok... but need to update a good PM
file if necessary.

TAHNKS TO SIR X-Shadow for This Solution.


WBR
Imran Khatri

maybe the erase flash kill the phone or lose the SN some time , i think it changed to hard ware problem change the flash Ic it will fix this problem if you got it again .

what was the status of the phone before u flash it ?

regards...