i've searched around but can't find exact solution.

Check this:-

1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u_st_i.fia
Algorithm Ok, MSID: 84A50DA69ACD4831F94D3A4354
Decoded MSID: 3E4EBAE9-009AB4CE-A8000000
Encoded FAID: A45D7DD5-280443A9-69C9295B
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013EFFFF Erased, Time: 00:33
MCU Flashing Completed, Time: 00:09
Area1: 0x01190000-0x0119FFFF Erased, Time: 00:00
Area2: 0x011A0000-0x0136FFFF Erased, Time: 00:15
CNT Flashing Completed, Time: 00:05
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

i can't write pm always says:-
Init Local Mode Failed
Write PM Failed

Nothing display on the LCD, no Local Mode, no Test Mode, no Contact Service....... nothing, just nothing!!!

UI Settings always failed too

when i put the battery and try to switch on the phone, only the four LED lights on keypad blinking, shortly the LCD blink too.

Is it s/w or h/w problem?

Please help... what should i do?

same problem with mine. any help plz. tnx a lot

FLASH IC is damage.. its better to replace.!

hi just re heat flash ic then fullflash will work,regards

or try to flash in another flasher....!

Have the same problem the phone's working but shutdown after sometime say 1 minute or so and i flash it with tornado the pone's dead now with the exact problem i dont think its a hw.can anyone help

Thanks for all ur help.
I've changed Flash IC and re-heated Flash IC but still same problem... Init Local Mode Failed.

Need some help

Is the flash IC same or can i use 1100 flash IC

same problem here.phone was working before full erase.i tried different pm.now not enter local mode/test mode/simlock...nobody doesnt help me.i couldnt find a method for solve my problem.

i've searched around but can't find exact solution.

Check this:-

1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u_st_i.fia
Algorithm Ok, MSID: 84A50DA69ACD4831F94D3A4354
Decoded MSID: 3E4EBAE9-009AB4CE-A8000000
Encoded FAID: A45D7DD5-280443A9-69C9295B
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013EFFFF Erased, Time: 00:33
MCU Flashing Completed, Time: 00:09
Area1: 0x01190000-0x0119FFFF Erased, Time: 00:00
Area2: 0x011A0000-0x0136FFFF Erased, Time: 00:15
CNT Flashing Completed, Time: 00:05
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

i can't write pm always says:-
Init Local Mode Failed
Write PM Failed

Nothing display on the LCD, no Local Mode, no Test Mode, no Contact Service....... nothing, just nothing!!!

UI Settings always failed too

when i put the battery and try to switch on the phone, only the four LED lights on keypad blinking, shortly the LCD blink too.

Is it s/w or h/w problem?

Please help... what should i do?

if you solve the problem,tell me the method pls.thanks.

check this
http://forum.gsmhosting.com/vbb/search.php?searchid=7930402

regards

i solved the problem.thanks.
http://www.gsmhosting.com/vbb/showthread.php?p=1730116#post1730116

i solved the problem.thanks.
http://www.gsmhosting.com/vbb/showth...16#post1730116

thanks for this link........ problem solved

i can't write pm always says:-
Init Local Mode Failed
Write PM Failed

Nothing display on the LCD, no Local Mode, no Test Mode, no Contact Service....... nothing, just nothing!!!

UI Settings always failed too

when i put the battery and try to switch on the phone, only the four LED lights on keypad blinking, shortly the LCD blink too.