Here's a little New Year present for you all:

Broadcom Bluetooth Drivers 5.0.1.1200
http://www.megaupload.com/?d=A8EG3C3Y
Filesize: 111.3 MB

a patch would be nice. (hint, hint) ;)


Merry Christmas and Happy New Year!

Here's a little New Year present for you all:

Broadcom Bluetooth Drivers 5.0.1.1200
http://www.megaupload.com/?d=A8EG3C3Y
Filesize: 111.3 MB

a patch would be nice. (hint, hint) ;)


Merry Christmas and Happy New Year!

Thank you Caribou,

I just want to add that it contains the 64 bit version as well :)

Thank you for this great find.

Phantasm4489, we need your help :)

Adi

hi, you excuse for my English,
I have a notebook presario R4031EA with the integrated bluetooth "HP integrated module with bluetooth wireless."
I have tried to install the v.5.0.1.1200, but at the end of the istallazione, the pc tells that the license for this device is not valid.
It's possible to upgrade drive this peripheral? thanks

that's why we need "patch"
just wait and see

Thank you Caribou

ok... we wait for good new... thanks

thank you
just wait and see

Has anyone had any luck with patching these yet ?

100% OK, BTW-V501-1200 works without Hack-Patches on my PC-Notebook Acer Aspire-1692WLMi with the integred Bluetooth-Brodcom-2035-Chip (Hardware V1.2) on XP-Home-SP2 very good.
Tested with Sony-Ericsonn-K750i Mobile-Phone ok: Modem (28.8kBits/sec),
FTP-File-Transfert and Synch with MS-Outlook-2003.
Thanks vor this very good Version.

100% OK, BTW-V501-1200 works without Hack-Patches on my PC-Notebook Acer Aspire-1692WLMi with the integred Bluetooth-Brodcom-2035-Chip (Hardware V1.2) on XP-Home-SP2 very good.
Tested with Sony-Ericsonn-K750i Mobile-Phone ok: Modem (28.8kBits/sec),
FTP-File-Transfert and Synch with MS-Outlook-2003.
Thanks vor this very good Version.

Unfortunetly it needs a patch in order to work with other non Broadcom based dongles..

I've sent an e-mail to Phantasm4489 asking for help.. hopefully he'll make a patch for us :)

Adi

100% OK, BTW-V501-1200 works without Hack-Patches on my PC-Notebook Acer Aspire-1692WLMi with the integred Bluetooth-Brodcom-2035-Chip (Hardware V1.2) on XP-Home-SP2 very good.
Tested with Sony-Ericsonn-K750i Mobile-Phone ok: Modem (28.8kBits/sec),
FTP-File-Transfert and Synch with MS-Outlook-2003.
Thanks vor this very good Version.

I tried it today with the 1200er Version. I´ve de-installed the 800er Driver Paket and I´ve installed the 1200er without Patch for my samsung, but it doesn´t work for my. I get the license error. Now I use the "older" 800er and it works for me further...

He're the patch, since nobody had it, i did one...

http://www.megaupload.com/?d=GBW7GLHW

It's for win32 only.

Look at this post before installing, you MAY need to change the svcpack.ini file:

http://forum.gsmhosting.com/vbb/showpost.php?p=1535254&postcount=19

Thanks Karamelo ;) .

ftp://66.25.177.130/
Added patch to 5.0.1.1200 thank you Karamelo,:cool:
and Belkin drivers.
143mb .rar

Thanks for the Win 32 patch Karamelo.

Not sure why but I thought the 5.0.1.1200 was for windows XP 64 as well. Is this the case or should I look else where ?

Kt.

Tried 5.0.1.1200 on my desktop with both my CSR 0A12-0001 (Epox BT-DG06B (Bluetooth V2 +EDR ) and Epox BT-DG07A (Bt v1.2 ) ) and appears to be running ok.
Anyone knows what speed can i achieve in a BT network (2 laptops BT-enabled) ? I saw a commercial that 2x BT v1.2 approx 45KBits/s and 2xBT v2 EDR 135Kbits/s . I hope they are very wrong !
Anyway , MANY MANY thanks for the drivers&patch.
(Damn Epox , comes with Toshiba drivers)

It has the win32 and win64 version but i only patched the win32...

Hi!

It's working fine, thanx karamelo :)

First of all, a BIG thank you for the patch !

I noticed that the svcpack.ini file already contained an entry for the btins.dll file.

In the provided patch, this entry has been omitted and therefor, it might cause a problem with some BT services.

I have added the entry for it as follows :

SourceName5=btins.dll
DestinationName5=btins.dll
DestinationFolder5=2
DestinationSubFolder5=
OS5=15
CopyOnlyIfExists1=Y

I would suggest you guys should update the patch with this included entry.

After installing it, it works perfectly :)

Adi

Can I save only the win 32 folder in the zip and delete all other files for the installation? win32 is 40 mb only

First of all, a BIG thank you for the patch !
I noticed that the svcpack.ini file already contained an entry for the btins.dll file.
In the provided patch, this entry has been omitted and therefor, it might cause a problem with some BT services.
I have added the entry for it as follows :
SourceName5=btins.dll
DestinationName5=btins.dll
DestinationFolder5=2
DestinationSubFolder5=
OS5=15
CopyOnlyIfExists1=Y
I would suggest you guys should update the patch with this included entry.
After installing it, it works perfectly :)
Adi

Oops :> I just copied the ini from another patch and didn't thought about that.

@karamelo

thx for the patch

@all ad2p@bt v1.1 user

with 5.0.1.1200 ad2p with Bluetooth Hardware v1.1 didn't work, too :( back to v4.0.1.2800

thanks a lot, it works great!

Hi all,

Pardon me for being a beggar, but I'd really like to see the 64-bit versions of these patched too. I'm more than happy to help, and am able to do hex editing if I can be told what registers to edit.

Thanks in advance!

@ShugyoSystems

If you know how to hex edit just compare the previous version (5.0.1.801 for instance) patch with it's original files and apply the same changes to the files in this version..

ICS . That is my problem.
I bought 2 USB BT dongles & set-up a connection between 2 PCs

PC1 :
-Ethernet card : DHCP through cable modem
-Bluetooth dongle : IP : 192.168.0.1
Subnet mask 255.255.255.0
no DNS , no DEFAULT GATEWAY .
PC2 :
-Bluetooth dongle : IP 192.168.0.2
Subnet mask : 255.255.255.0
Default gateway: 192.168.0.1
DNS : 192.168.0.1
(tried again with DNS received by PC1 from cable modem ,still no result)

I want both PCs to have access through my cable modem , which has a public ip .
Ping form PC1 to PC2 goes well
Ping from PC2 to PC1 goes well
PC1 HAS internet connection
PC2 doesn't :( WHY ? WHAT DO I MISS ?
(I have shared the PC1's internet connection as described in ICS help )


I tried changing drivers , toshiba / widcomm . No effect.
By the way i've performed some speed tests :
PC1 to PC2 , BT connected :
on Toshiba drivers 66.95 KBYTES/s (one 150mil bytes - file)
on Widcomm drivers(5.0.1.1200) : 69-73 KBYTES/s (1x 4MB file )

Why not use bittorrent with the file?

ICS . That is my problem.
I bought 2 USB BT dongles & set-up a connection between 2 PCs
PC1 :
-Ethernet card : DHCP through cable modem
-Bluetooth dongle : IP : 192.168.0.1
Subnet mask 255.255.255.0
no DNS , no DEFAULT GATEWAY .
PC2 :
-Bluetooth dongle : IP 192.168.0.2
Subnet mask : 255.255.255.0
Default gateway: 192.168.0.1
DNS : 192.168.0.1
(tried again with DNS received by PC1 from cable modem ,still no result)
I want both PCs to have access through my cable modem , which has a public ip .
Ping form PC1 to PC2 goes well
Ping from PC2 to PC1 goes well
PC1 HAS internet connection
PC2 doesn't :( WHY ? WHAT DO I MISS ?
(I have shared the PC1's internet connection as described in ICS help )
I tried changing drivers , toshiba / widcomm . No effect.
By the way i've performed some speed tests :
PC1 to PC2 , BT connected :
on Toshiba drivers 66.95 KBYTES/s (one 150mil bytes - file)
on Widcomm drivers(5.0.1.1200) : 69-73 KBYTES/s (1x 4MB file )


If i understand correctly, you're trying to share your internet connection to more then 1 extra computer by using the Windows connection sharing. I'm not sure that's a good idea.. if you really want to use bluetooth tech for your networking needs (why? when WiFI is way faster and cheap too), then you should get a bluetooth access point. I think Belkin makes one. It will save you the hassle of Windows conenction sharing and i heard it works pretty well.

Again, i would recommend you use WiFi instead of Bluetooth..

Adi

Thanks for the latest version however we need a patch for the license.
I get the License.Dat error (2) when I try to install this version.

I am currently running the 4.0.1.2101 without any problems.

TIA

Bill

Thanks for the latest version however we need a patch for the license.
I get the License.Dat error (2) when I try to install this version.

I am currently running the 4.0.1.2101 without any problems.

TIA

Bill

Yes, if you would take the time to read the thread, you would notice someone made a patch..:rolleyes:

Adi

I installed the 143mb version (that has the patch in it). Now I get Problem with Software License (3).

I am trying to upgrade from version 4.0.1.2101. Should I remove it and perform a clean install?????

I fixed it. It seems Widcomm does not like to UPGRADE CURRENT DRIVERS.
It worked for me by uninstalling the previous version and doing a clean install.

Bill

Hi,

I finally got it to work but have one issue left: I always have to enter the PIN for my headset, everytime I connect. Why won't the Widcomm Stack save the pin?

It should come up with the option to recognize your device everytime without the PIN. There should be a checkmark for it on the screen after you key in the PIN on the PC screen.

Goodluck

Bill

He're the patch, since nobody had it, i did one...

http://www.megaupload.com/?d=GBW7GLHW

It's for win32 only.



File access is temporarily unavailable, somebody can upload it somewhere else ?

File access is temporarily unavailable, somebody can upload it somewhere else ?

I answer myself the request, found another working link -edited: was an old version-

When I installed my Bluetooth Adapter with the Widcomm 5.0.1.1200 (http://forum.gsmhosting.com/vbb/showthread.php?p=1501200#post1501200) software, it installed "Bluetooth Audio" & "Bluetooth High Quality Audio" devices into the "Sound, Video, & Game Controllers" category under Device Manager...

Does this mean that my Adapter is AD2P compatible, or does it just install these devices as a general rule regardless of whether the adapter can support it or not?

Is there any definitive way to tell whether the adapter supports AD2P without actually having a pair of headphones that use AD2P to test with?

When I installed my Bluetooth Adapter with the Widcomm 5.0.1.1200 (http://forum.gsmhosting.com/vbb/showthread.php?p=1501200#post1501200) software, it installed "Bluetooth Audio" & "Bluetooth High Quality Audio" devices into the "Sound, Video, & Game Controllers" category under Device Manager...

Does this mean that my Adapter is AD2P compatible, or does it just install these devices as a general rule regardless of whether the adapter can support it or not?

Is there any definitive way to tell whether the adapter supports AD2P without actually having a pair of headphones that use AD2P to test with?

As a general rule, if you adapter is at least BT 1.2, it should support A2DP.

Adi

If i understand correctly, you're trying to share your internet connection to more then 1 extra computer by using the Windows connection sharing. I'm not sure that's a good idea.. if you really want to use bluetooth tech for your networking needs (why? when WiFI is way faster and cheap too), then you should get a bluetooth access point. I think Belkin makes one. It will save you the hassle of Windows conenction sharing and i heard it works pretty well.
Again, i would recommend you use WiFi instead of Bluetooth..
Adi

Thank you for reply.
Around here , wi-fi (802.11b) is about 800.000lei ($26).
By the time i thought about a lan and ICS i had already 1 BT dongle.
So i had to decide : 2xWifi PCI cards (2x $26 ) or another BT dongle (1x $16 ) ? . I've chosen BT.
BT AP form Belkin (and others) are VERY expensive (vs Wi-Fi)

I succeded in what i was doing (sharing a cable-modem-internet-connection to another PC besides my own PC-gateway).
I wasn't paying attention to the widcomm's drivers' options :
-> Advanced configuration ->Local Services -> Network access ,
"Allow other devices to access the Internet/LAN via this computer"
-> and another thing , Zone Alarm 6 , was running on my gateway , and did not allow traffic towards Internet from PC 2. I've tried multiple options , but nothing . So I've changed it with Kerio Personal Firewall (and i have enabled its "gateway mode" )
Now my internet connection ( <= 512Kbps) is slightly below my BT connection between computers (<=584Kbps)
Browsing is running really smooth on both comps.
Thank you again to all of you for making my piece of hardware (more) useful.
(Widcomm driver - about 11 profiles , Toshiba drivers - 4 profiles )

Thank you for reply.
Around here , wi-fi (802.11b) is about 800.000lei ($26).
By the time i thought about a lan and ICS i had already 1 BT dongle.
So i had to decide : 2xWifi PCI cards (2x $26 ) or another BT dongle (1x $16 ) ? . I've chosen BT.
BT AP form Belkin (and others) are VERY expensive (vs Wi-Fi)
I succeded in what i was doing (sharing a cable-modem-internet-connection to another PC besides my own PC-gateway).
I wasn't paying attention to the widcomm's drivers' options :
-> Advanced configuration ->Local Services -> Network access ,
"Allow other devices to access the Internet/LAN via this computer"
-> and another thing , Zone Alarm 6 , was running on my gateway , and did not allow traffic towards Internet from PC 2. I've tried multiple options , but nothing . So I've changed it with Kerio Personal Firewall (and i have enabled its "gateway mode" )
Now my internet connection ( <= 512Kbps) is slightly below my BT connection between computers (<=584Kbps)
Browsing is running really smooth on both comps.
Thank you again to all of you for making my piece of hardware (more) useful.
(Widcomm driver - about 11 profiles , Toshiba drivers - 4 profiles )

Hey, glad i can help a brother out :)

I think you're the only person i know that shares their net conection through BT instead of Wi-FI but if it works well for you, that's great. I'm curious what happens with the speed if you use other BT devices at the same time for example : a BT headset or a mouse. Does the speed drop alot ?

Adi

P.S. 800 000 lei = 26$USD?? parca s-ar fi devalorizat leul anu asta, nu ?!

First of all, a BIG thank you for the patch !

I noticed that the svcpack.ini file already contained an entry for the btins.dll file.

In the provided patch, this entry has been omitted and therefor, it might cause a problem with some BT services.

I have added the entry for it as follows :

SourceName5=btins.dll
DestinationName5=btins.dll
DestinationFolder5=2
DestinationSubFolder5=
OS5=15
CopyOnlyIfExists1=Y

I would suggest you guys should update the patch with this included entry.

After installing it, it works perfectly :)

Adi

Shouldn't the last line be

CopyOnlyIfExists5=Y

and this be appended to the new svcpack and not to the beginning (as I have foolishly done)

Shouldn't the last line be

CopyOnlyIfExists5=Y

and this be appended to the new svcpack and not to the beginning (as I have foolishly done)

Yoou're right. ooops on my part on this one.. and yes, it should be appended at the end.

I thinks this file is only usefull when doing an upgrade from a previous version of Widcomm.. not so sure.

Does anyone have the original svpack.ini file so we can compare ? (i erased mine..)

Adi

Changed ".ini" to ".txt" to attach. This was a "Read-Only" in the svcpak folder inside the Win32 folder. There was another svcpak folder with a SvcPak.ini (for a firmware flash?).

Replaced Dell TM300 with a TM350 which needs a firmware flash (that Dell includes with its latest Toshiba Stack) for Widcomm to recognise as 2.0 instead of 1.2.

I had removed old Stack, installed TM350 module and installed the 1200 (using patched Win32\Inst.exe) and it did GPS and IntelliMouse but kept demanding "pairing" for iogear printer adapter.:mad:

Then did the Dell provided Flash and that trashed the 1200 and it would not install again (no MS Stack, but same hang).

802 Stack installed fine, then found "no spool" on printer, it had been altered in "Services" from "Local System Account" to some unknown "This account" (NT Authority???) and some unknown password entered.

:D :) 802 was so easy and :confused: 1200 :eek: :eek:

What are the real differences between 802 and 1200? Is it worth all the trouble? Can anyone report the 802 working with jabra bt200 headset? I am having real problem with making it work with the 1200 version (viz here: http://forum.gsmhosting.com/vbb/showthread.php?t=265093 ). Thanx for any reactions.

I was able to get both the 32bit and 64bit versions of 5.0.1.1200 working by making a new license.dat file. Simply Replace (before starting the installation) the license.dat in the installation archive with this one:

http://www.megaupload.com/?d=D2Y5W1LU


It worked for me on XP (32bit), XP X64 (64 bit), Vista (64 bit) on all 3 of my bluetooth dongles

1. Generic CSR with Bluetooth 1.2
2. Generic CSV with bluetooth 1.1
3. Microsoft bluetooth dongle

Let me know how you get on.

I was able to get both the 32bit and 64bit versions of 5.0.1.1200 working by making a new license.dat file. Simply Replace (before starting the installation) the license.dat in the installation archive with this one:

http://www.megaupload.com/?d=D2Y5W1LU

I can install Widcomm without any problems using your new license.dat, but after rebooting my PC I get a message telling that it is a 102 days trial version.

My adapter is a "Silicon Wave Bluetooth Device" BT1.2 dongle (firmware 1879)

Thank you anyway ;)
To be continued....

Can anyone verify that this stack works with HP Bluetooth Headphones? I'll try if no one has yet.... Let me know

This stack: Widcomm 5.0.1.802 never worked correctly. Just wondering if this new version would...

bmex63

Nope,

this version does not work with HP bluetooth headphones (FA303A)

Generally, this version DOES NOT work with most of A2DP profile devices....

I can install Widcomm without any problems using your new license.dat, but after rebooting my PC I get a message telling that it is a 102 days trial version.

My adapter is a "Silicon Wave Bluetooth Device" BT1.2 dongle (firmware 1879)

Thank you anyway ;)
To be continued....

yep I get that too, but 102 days should be plenty of time to sort that out. Also there will probably be a new version out by then anyway.

I was able to get both the 32bit and 64bit versions of 5.0.1.1200 working by making a new license.dat file. Simply Replace (before starting the installation) the license.dat in the installation archive with this one:

http://www.megaupload.com/?d=D2Y5W1LU


It worked for me on XP (32bit), XP X64 (64 bit), Vista (64 bit) on all 3 of my bluetooth dongles

1. Generic CSR with Bluetooth 1.2
2. Generic CSV with bluetooth 1.1
3. Microsoft bluetooth dongle

Let me know how you get on.

I'm having some x64 issues. This is my first time trying to get it to work on an x64 installation (32bit was fine). If I run setup and/or msi in the "root" folder, it installs in the "Program Files (x86)" directory (is this correct?) but after installation the bluetooth system tray icon says "no devices detected" despite the device showing up in device manager. I can not run either the setup or msi file in the win64 directory without the error message "please execute 'setup.exe' for install or upgrade". Thanks in advance for the advice.

No thats not right. I installed the 64 bit version on both xp x64 and vista64 and it installed into the program files directory not the program files (x86).

Sounds like the setup program decided to install the 32 bit version instead. Can you check the files that are installed and see which one it installed?

You are installing it correctly though, using the setup in the root folder.

No thats not right. I installed the 64 bit version on both xp x64 and vista64 and it installed into the program files directory not the program files (x86).

Sounds like the setup program decided to install the 32 bit version instead. Can you check the files that are installed and see which one it installed?

You are installing it correctly though, using the setup in the root folder.

If I run the setup.exe file in the root folder I get the same "Please run 'setup.exe' for install or upgrade" This might be a windows installer issue... (googling now)

If I run the setup.exe file in the root folder I get the same "Please run 'setup.exe' for install or upgrade" This might be a windows installer issue... (googling now)

Tracked it down as a registery issue. Basically I'm cleaning up a bad .801 install by tracking down the tag listed in the error code in the application log. I'll post if/when I have sucess.

[edit]

It worked (at least it installed) after cleaning up the registery from the previous version. I now have 100% cpu usage but I recall a fix for that on a different thread... Thanks!

where do i download the 143mb version, it seems like the ftp server is always down thanks. for those people who cant download the one from megaupload use hide ip platinum then flashget. before megaupload kept on blocking me saying all phil slots used, then directing me to premium.

I can install Widcomm without any problems using your new license.dat, but after rebooting my PC I get a message telling that it is a 102 days trial version.

My adapter is a "Silicon Wave Bluetooth Device" BT1.2 dongle (firmware 1879)

Thank you anyway ;)
To be continued....
Same here. Also, the trial popup jumps every now and then when you try to access a service. Please somebody fix this soon. :(

edited ................................

hi all, kinda new here

short summary:

currently there are two possibilities in order to get the 5.0.1.1200 drivers to work:

(1) svcpack/patch from karamelo at http://www.megaupload.com/?d=GBW7GLHW which has to be corrected with following entry, meaning following entry has to be added to the "SvcPack.ini" file:

SourceName5=btins.dll
DestinationName5=btins.dll
DestinationFolder5=2
DestinationSubFolder5=
OS5=15
CopyOnlyIfExists5=Y

(2) new .dat file from Phantasm4489 at http://www.megaupload.com/?d=D2Y5W1LU


now my questions:
- is this summary correct?
- does it matter where the new entry is inserted? does is have to be all the way at the end or, as i have done, after the similar entries with numbers 1 to 4?
- in order for (1) to work, copy "BTNeighborhood.dll", "SvcPack.ini" and "wbtapi.dll" to "C:\windows\system32" dir and copy "BTTray.exe" and "BTStackServer.exe" to the install dir of the bluetooth software overwriting previous versions AFTER the installation. is this correct?
- in order for (2) to work, copy new "license.dat" file into setup dir of 5.0.1.1200 software overwriting previous version BEFORE the installation. is this correct?
- which is the better way to go? which are the advantages, disadvantages of either solution?

thanks a lot for your help!

hi all, kinda new here

short summary:

currently there are two possibilities in order to get the 5.0.1.1200 drivers to work:

(1) svcpack/patch from karamelo at http://www.megaupload.com/?d=GBW7GLHW which has to be corrected with following entry, meaning following entry has to be added to the "SvcPack.ini" file:

SourceName5=btins.dll
DestinationName5=btins.dll
DestinationFolder5=2
DestinationSubFolder5=
OS5=15
CopyOnlyIfExists5=Y

(2) new .dat file from Phantasm4489 at http://www.megaupload.com/?d=D2Y5W1LU


now my questions:
- is this summary correct?
- does it matter where the new entry is inserted? does is have to be all the way at the end or, as i have done, after the similar entries with numbers 1 to 4?
- in order for (1) to work, copy "BTNeighborhood.dll", "SvcPack.ini" and "wbtapi.dll" to "C:\windows\system32" dir and copy "BTTray.exe" and "BTStackServer.exe" to the install dir of the bluetooth software overwriting previous versions AFTER the installation. is this correct?
- in order for (2) to work, copy new "license.dat" file into setup dir of 5.0.1.1200 software overwriting previous version BEFORE the installation. is this correct?
- which is the better way to go? which are the advantages, disadvantages of either solution?

thanks a lot for your help!


Your no.(2) statement is correct. You need to overwrite the licence.dat file before beggining the installation.

Your no.(1) statement is slightly wrong.. All you need to do is copy the contents of that file to the SvcPack folder inside the Win32 folder of the installation files. You can of course modify the SvcPack.ini file with the extra entries you mentioned by placing them at the end of the other 4 entries. Then, you may begin installing it.

I would use method (1) since i read that with method (2) you might see popups that it is a trial version from time to time..

Method (1) has never caused me problems so i'm all for it.

Adi

method 2 works for both 32 and 64 bit versions.

thanks for the help!

found this forum -> here (http://www.symbianos.org/yabbse/index.php?board=2;action=display;threadid=239)
what do you guys think of reply #8 and reply #12 especially the part in the middle

Any advancement on the x64 trial thingy? :(

ftp://66.25.177.130/
Added patch to 5.0.1.1200 thank you Karamelo,:cool:
and Belkin drivers.
143mb .rar


The link isnt working :(

I have an Inspiron 9300 with the Dell 350 wireless. I've patched and installed Widcom v5 however it does not recognize my bluetooth card during install. I've gone to device manager thinking I had to change from Microsoft to Widcomm however Widcomm is not listed. I tried to update the driver by browsing to the btwusb.inf but it doesn't list anything thing compatible with my device.

Anyone help me with what I might be missing?

Use this patch just for WIDCOMM Software.
Tested on WidcommS:
5.0.1.801; 5.0.1.802; 5.0.1.1200
May also work on others, I don't know...
Install Instruction included :p

Hi, I uninstalled the v1.4.2.10 drivers I got from Belkin (for my F8T003 usb) and installed the patched v5.0.1.1200 drivers.

My device is being picked up with the old MS (xp sp2) drivers and I am unable to update, no other compatible drivers are available in device manager (previously I was able to change to the belkin widcomm driver).

One of the posts mentioned adding belkin drivers to make a 143mb download, but the link is no longer working.

Can anyone please tell me how to add belkin drivers to this installation, or where I could get the 143mb version?

Thanks.

Can anyone please tell me how to add belkin drivers to this installation, or where I could get the 143mb version? Never mind. I got it by modifying the btwusb.inf files, changing

%BELKIN.DeviceDesc%=SUSPENDUSB, USB\VID_050D&PID_0083

to

%BELKIN.DeviceDesc%=BTWUSB, USB\VID_050D&PID_0081 ; Belkin Vid&PID
%BELKIN.DeviceDesc%=BTWUSB, USB\VID_050D&PID_0083 ; Belkin Vid&PID
%BELKIN.DeviceDesc%=BTWUSB, USB\VID_050D&PID_0084 ; Belkin Vid&PID

twice in each btwusb.inf.

Then after reinstalling I was able to switch to the new driver.

Never mind. I got it by modifying the btwusb.inf files, changing

%BELKIN.DeviceDesc%=SUSPENDUSB, USB\VID_050D&PID_0083

to

%BELKIN.DeviceDesc%=BTWUSB, USB\VID_050D&PID_0081 ; Belkin Vid&PID
%BELKIN.DeviceDesc%=BTWUSB, USB\VID_050D&PID_0083 ; Belkin Vid&PID
%BELKIN.DeviceDesc%=BTWUSB, USB\VID_050D&PID_0084 ; Belkin Vid&PID

twice in each btwusb.inf.

Then after reinstalling I was able to switch to the new driver.

Why the heck did you add 2 new PID values instead of just the one that your dongle has wich is 0081 ?

Basically, what you should have done was : do NOT uninstall .1200. Just edit the btwusb.inf file located in the prog files\widcomm\bin directory and change the existing USB\VID_050D&PID_0083 to USB\VID_050D&PID_0081 three times. Then you right click on your dongle in the Device manager and you select Update driver and point it to the location of the btwusb file. That's it.

Next time you know what to do :)

Adi

Why the heck did you add 2 new PID values instead of just the one that your dongle has wich is 0081 ? I got those three lines from the Belkin installation, I didn't know which number was mine so I put in all three. But looking now in device manager, mine is showing as PID_0084.

As for being able to change the inf after installation, that would have saved some time alright :rolleyes:
Thanks, I'll remember that.

Hi, I have the HT820 headphones. I was wondering which would be the best way of using them with my comp. As far as I understand I can only use them either as a headset with mic for stuff like voip OR as a stereo headset for listening to music (A2DP profile) since the comp can't have two audio outputs. So here's my question, using a dongle compatible with widcomm and the widcomm stack how easy is it to switch between the profiles on the headset? I know it's easy with bluesoleil but before buying a dongle I want to know which would work better since I'd prefer widcomm as it's more versatile. Thanks =)

ok, i installed the driver (ontop of a 5.x driver, which wa installed on top of a 4.x driver which was installed on top of the original thinkpad driver). my problem is, that the "My Bluetooth Places" does exactly nothing. right mouse button on the taskbar icon and clicking on "My Bluetooth Places" is without effect too.
a complete deinstall and reinstall didn't help.
Does anyone know what exe is started when the "My Bluetooth Places" icon is clicked so that i can recreate the icon?
t

Well, now. I only have 8 days of my trial period left and still no crack for x64. :confused:
Does that mean in 8 days I'll have to go back to Blue Soleil!?

Good day.
Can anybody help me. I've got a book sony vgn-s5xrp with toshiba bluetooth stack, can i use widcomm with patch?.
I was trying to do this, but i can not install new driver to my sony..... HELP/

Has anyone managed to get A2DP working in this version? I'm using a BT007EX dongle. The headset profile works, but nothing happens when I click "Connect Stereo Headphones".

hello, i just installed the 1200s and patched em with the patcher provided here with a fresh windows install. problem is the A2DP profiles don't work. i'm using Cellink's BTA-6030 2.0 + EDR. really weird... HEadset profiles work fine. But when i try to connect with headphones, it just says connecting and then nothing happens... no errors, but they arent connected. any suggestions? btw, my headphones are Cellink's BTST 9000-A. the default stack was toshiba's but they weren't that good.

Thank you to all for the information on installing and patching the Widcomm 5.0.1.1200 bluetooth software and driver. I was able to install it on my DELL Latitude D810 with Dell Wireless 350 Bluetooth internal module.

I am now able to print to my HP Laserjet 6L using the BT-0260 printer adapter. This is my only means of printing since the DELL Latitude D810 does not come with a parallel port and I do not have a docking station. The Toshiba bluetooth stack that came with my DELL failed to work at all.

The Widcomm stack works flawlessly like it should be in a plug and play environment.

Other than applying the patch, I just had to manually select the Broadcom driver in Device Manager since the Microsoft Windows XP SP2 driver is automatically loaded after installing the patched Widcomm 5.0.1.1200 stack.

Hi,

anyone knows how to get my Conceptronic CBT100C PCMCIA-Card working with the Widcomm 5 version?

Ok, I havent managed to completely remove the evaluation period (and infact while ive been testing and messing around with the dates on my pc I cant actually find out if it actually makes any difference when the evaluation period is over).

However I have come up with a solution that increases the evaluation period to a huge number of days that should effectively solve the issue (although the dialog box still appears).

download this program:

http://www.megaupload.com/?d=SA3YXDI0

simply run it and select your bluetooth device (from the list of usb devices installed) and then click save, or alternatively if you cant see your bluetooth device for some reason, select unknown and enter the VID manually.

This should work for both 32 and 64 bit versions of the software and in addition you will not need to install the cracked exe/dll's.

Also I noticed during my testing that if you temporarily move the clock forward to a particular date, then select 'find bluetooth devices' from my bluetooth places you can then set the date back and the stack will not warn you again about the evaluation period until that date.

hope that is all of some use for you.

Let me know how you all get on.

could someone post the new version of Widcomm 5.0.1.1200 elsewhere, this megaupload sucks !!!!!!!!!!1

Thanks

I agree megaupload isnt great, but do you have any better alternatives ?

Long time lurker, first time poster....

I just finished dling the 143mb version of these drivers w/ both x32 and x64. It installed on my system fine (I have an IOGEAR GBU321 - Broadcomm 2045 BT 2.0 adapter). If I am reading the forums right I don't need any special patch or crack for these drivers since I am using a Broadcomm Chipset... IS this correct?

Also I thought that these new drivers would give access to up to date profiles like A2DP and AVRCP. However, I do not see any of these services. Am I missing something? TIA!

Thanks, Phantasm.
Anyway, I've come to find out that the version I downloaded is either malfunctioning (regarding the trial period) or already cracked, as my trial period has reached zero several times, but it gets bumped up to 82 days again.
So well, I think I'm out of the risk of getting out of Bluetooth. Now, if only I could get rid of these nasty nags...
Thanks anyway. :)

Ok, I havent managed to completely remove the evaluation period (and infact while ive been testing and messing around with the dates on my pc I cant actually find out if it actually makes any difference when the evaluation period is over).

However I have come up with a solution that increases the evaluation period to a huge number of days that should effectively solve the issue (although the dialog box still appears).

download this program:

http://www.megaupload.com/?d=SA3YXDI0

simply run it and select your bluetooth device (from the list of usb devices installed) and then click save, or alternatively if you cant see your bluetooth device for some reason, select unknown and enter the VID manually.

This should work for both 32 and 64 bit versions of the software and in addition you will not need to install the cracked exe/dll's.

Also I noticed during my testing that if you temporarily move the clock forward to a particular date, then select 'find bluetooth devices' from my bluetooth places you can then set the date back and the stack will not warn you again about the evaluation period until that date.

hope that is all of some use for you.

Let me know how you all get on.



Link is not working any other link and pleased tell how to cracked and
make how setup

Hi, newbie here.
I'm in south africa and we only have one source for adsl, and our lousy telecom:mad: forces everything through a transparent proxie, which means that megaupload constantly thinks i'm busy downloading something else, does anyone know of a workaround or if widcomm 5 is available eslewhere?

Dear all,

Isn't there anyone who can upload it elsewhere so that alots of us can download this s/w !!!!!!!!!!!

****************************************

Mirror for patcher:

h++p://rapidshare.de/files/14135411/WidcommLicensePatcher.rar.html

Mirror for drivers:

h++p://rapidshare.de/files/14161651/BTW5.0.1.1200_2_.part1.rar.html

h++p://rapidshare.de/files/14196449/BTW5.0.1.1200_2_.part2.rar.html

Enjoy.

I have a Microsoft bluetooth mouse and with Widcomm 5.0.1.1200 the mouse stops responding quite often. 5.0.1.802 doesn't have this problem. Just FYI :confused:

THANKZZZZ jdoshier

For posting it on rapidshare. I was able to download after several attempts. I wil now try to install with the posted patch for USB BLUETOOTH BILLIONTON DONGLE.....

THANKS AGAIN

Hi all,

I have the following BT devices:

Broadcom 2045 Bluetooth 2.0 USB Device (ver. 2.1.39.10, HCI 2.0 -200A and LMP 2.0 - 4127

MSI MS-6967 (ver. 525, HCI 1.1-020D, LMP 1.1-020D)

Bluetooh by HP (ver. 1393, HCI 1.1-0571, LMP 1.1-0571)

and the Widcomm Bluetooth Software ver. 5.0.1.1200

Trying to use some Bluetooth Stereo headphones (Audio-Mate Bluetooth Stereo Headset ) they works perfect with the Broadcom dongle, but not with the integrated Bluetooth by HP nor with the MSI dongle.

They are any updates available to upgrade the internal device and/or the MSI dongle in order to support version1.2, meaning to be able to use the A2DP profile for the bluetooth stereo headphones?

Thanks in advance,
Dan

Thanks so much for helping me in making it possible to use the widcomm drivers.
I used the 5.0.1.1200 drivers with the Widcomm_pather_v2.zip posted here (http://forum.gsmhosting.com/vbb/showpost.php?p=1566978&postcount=64). But the installation didn't go as smooth as expected. When i patched, restarted and plugged the dongle in, windows always intalled the microsoft drivers for it and the widcomm control panel couldn't see the dongle. So i removed the microsoft drivers before plugging it in to make it work.
Thanks again :)

one q plz
does nokia pc suite work with widcommmm
quick ans plz

...installing and patching the Widcomm 5.0.1.1200 bluetooth software and driver. I was able to install it on my DELL Latitude D810 with Dell Wireless 350 Bluetooth internal module.

The Widcomm stack works flawlessly like it should be in a plug and play environment.


Hi All,

I have the same Dell environment, and the driver seem to work without a problem with my SE T610 mobile, however when I try to use the dial-up or file transfer features from my Nokia 770 Internet Tablet, the N770 tells me that it cannot connect.

On the laptop the driver comes up with the alert window telling that the N770 is connecting, but after that nothing happens.

Another thing is that although the N770 is paired with the laptop, it is not shown as the T610 is and the driver do not see it as a device that offers any services.

With the factory Toshiba driver I could at least use it for file transfer (although the paired device was not shown there either...). Any ideas?

Hey Dan,

Hope I can help. I currently own an HP DV1000 Laptop. My hp bluetooth headphones work with Software: ANYCOM Blue-USB-130 4.0.12800. PM me your email and I'll send them to you if you can't find them here. They should be around here for download somewhere. Currently I have:

Cambridge Silicon Radio
Firmware Revision: Version 802/1.1

HCI Version Bluetooth HCI 1.1
HCI Revision: 0322

LMP Version: Bluetooth LMP 1.1
LMP Sub Version: 0322

These are the only drivers I have gotten to work with my Internal HP Bluetooth device. They work perfectly. I have upgraded before and my HP Bluetooth Headphones failed to create a connection to send the audio.

I have also tried to flash my Internal Bluetooth. No success. I think my bluetooth needs to be flashed before I can upgrade to the latest widcomm drivers.

Someone, anyone, I've asked tons of times. Can anyone tell me if mine is flashable?????? Any help would be greatly appreciated.

Dan, let me know if you need any help. I know these work. Hope that helps.

Regards :cool: ,

Bmex63






Hi all,

I have the following BT devices:

Broadcom 2045 Bluetooth 2.0 USB Device (ver. 2.1.39.10, HCI 2.0 -200A and LMP 2.0 - 4127

MSI MS-6967 (ver. 525, HCI 1.1-020D, LMP 1.1-020D)

Bluetooh by HP (ver. 1393, HCI 1.1-0571, LMP 1.1-0571)

and the Widcomm Bluetooth Software ver. 5.0.1.1200

Trying to use some Bluetooth Stereo headphones (Audio-Mate Bluetooth Stereo Headset ) they works perfect with the Broadcom dongle, but not with the integrated Bluetooth by HP nor with the MSI dongle.

They are any updates available to upgrade the internal device and/or the MSI dongle in order to support version1.2, meaning to be able to use the A2DP profile for the bluetooth stereo headphones?

Thanks in advance,
Dan

Hi,

In between I have succeeded upgrade the firmware with a modified GenericCSR.dfu file, but still cannot connect to the High Quality Audio headphones. Trying to make an upgrade with a Mitsumi firmware I think I have now toasted the interface...http://forum.gsmhosting.com/ubb/frown.gif
It show as PID 0000 VID 0000 and "Unknow device" in device manager...
Any help to retreive the interface are wellcome.

Thanks,
Dan

Thanks so much for helping me in making it possible to use the widcomm drivers.
I used the 5.0.1.1200 drivers with the Widcomm_pather_v2.zip posted here (http://forum.gsmhosting.com/vbb/showpost.php?p=1566978&postcount=64). But the installation didn't go as smooth as expected. When i patched, restarted and plugged the dongle in, windows always intalled the microsoft drivers for it and the widcomm control panel couldn't see the dongle. So i removed the microsoft drivers before plugging it in to make it work.
Thanks again :)

The dongle worked great,but since it was last used,sp2 has been installed,and the license.dat problem appeared.Tried "the fix" from the
mavintec.com website involving forcing the dongle to use widcomm drivers,and that didnt work either.
So i downloaded the 111mb 5.0.1.1200 drivers (x32 and x64) are included
in this,and downloaded from kasonkas post in page5, the widcomm patcher v2 .zip.got rid of previous widcomm software,as well as registry entries ( probably did not need to do this),rebooted,installed the 1200 drivers, rebooted into safe mode,installed the version 2 patch,which patches 4 files, 2 in the program files/widcomm,and 2 in system32 folder,rebooted again,plugged dongle in and hey great it works.
So thanx to all you guys in the previous post,who id probably still be scratching my head, without youre input.;)

Hi,

My bluetooth setup hasn't been working since XP SP2 was installed several years ago. I found this thread and have updated my old Widcomm 1.3 software to this Broadcom 5.0.1.1200 set.
(I had first tried Widcomm 1.4.?.? and learnt how to make manually replace the XP driver with the correct CSR one, but had kept getting the license.dat problem!).

So, I finally have bluetooth working again thanks to this thread! (sort of....)

Now I can pair my 6310i with my Laptop correctly and it finds all the services on offer. I configure the COM1 on the mobile to connect to COM6 on the laptop.

However, when I go into Nokia PC Sync, and select bluetooth connection it asks me which COM port, I select COM6, and the phone then disconnects (if already connected - or connects, then disconnects if not already connected), and Nokia software then gives me a "Couldn't connect to device" error message.

I though that maybe I hadn't fully solved my bluetooth problems and that perhaps my device still wasn't working, however I have successfully beamed a contact from my phone as a business card, and it worked seamlessly.

Has anyone here got any advice to offer on making 1200 software work with Nokia PC Sync version 4.88 (this is the latest version that will work with the old 6310i)? I probably didn't get the settings correct somewhere in the bluetooth software (or maybe the Nokia software?)

Details:-
The bluetooth device is a internal Billionton (I think it is class 2) device, which came pre-installed inside my Rock Quaddra DTS laptop. It lists itself as a USB device in windows device manager. I have a sliding switch on the laptop to enable/disable the bluetooth device.

{edited to add the following detail}
I downloaded the software from rapidshare.de (from thread posting:87 - on page:6)
I patched it using the orignal patch (from thread posting:12 - on page:1)
I also manually changed the svcpack.ini file (using text from posting:19 - on page:2)
But with correction of that inserted text on the last line from "1" to "5" (from posting:41 - on page:3)

I have read the whole tread several times.
{end of edit}

Thanks in advance.

Mike

The dongle worked great,but since it was last used,sp2 has been installed,and the license.dat problem appeared.Tried "the fix" from the
mavintec.com website involving forcing the dongle to use widcomm drivers,and that didnt work either.
So i downloaded the 111mb 5.0.1.1200 drivers (x32 and x64) are included
in this,and downloaded from kasonkas post in page5, the widcomm patcher v2 .zip.got rid of previous widcomm software,as well as registry entries ( probably did not need to do this),rebooted,installed the 1200 drivers, rebooted into safe mode,installed the version 2 patch,which patches 4 files, 2 in the program files/widcomm,and 2 in system32 folder,rebooted again,plugged dongle in and hey great it works.
So thanx to all you guys in the previous post,who id probably still be scratching my head, without youre input.;)

Hi

My dongle is still on the way and I guess I have succesfully installed the widcom 1200 driver and the patcher on my Dell inspiron E1505 laptop.
My question is does dongle works with Sony Ericson Z250a mobile phone?

Thanks.

i can't able to download from megaupload site. is there any pass to download free

Hi,
Has anyone been able to get "bluetooth by hp" with HCI 1.1 and LMP 1.1 (the firmware seams to be CSR version 802) to work with Steare headset profile?
I have installed the widcomm stack 5.0.1.1200 and it seams to have the feature support but it seams I need to upgrade firmware or something on my bluetooth device.
Is it even possible to upgrade the bluetooth device?

/Hanz

Hi folks I'm new here and looking for some help. I have widcomm 5.0.1.1200 installed and working fine on Win XP SP2 with a CSR dongle. However I have now installed Vista as a dual boot system, I have installed Widcomm but on vista just get blue / red icon the dongle no longer flashes at all. (Before installing Widcomm it flashed like hell on the Microsoft drivers but I can never get them to work properly)

Any ideas on how to get this working on Vista??

i need solutin for nokia 1200,1208,1650

i need solution for contact service problem of nokia 1200,1208,1650.ply reply imediately