please is there someone to help me how i can complet my k700 cid36
with my original HWK

i succeded to revive this dead k700 with sonics cracked(not with HWK)
now it gives config.........

i tried to flash it with HWK it flashes only main then it die then i reflash it with sonics to revive it with config...error....

please show mr the real steps to get it work fine
i have only HWK original

Pls post ur hwk log at here.

flash cu/fs then do int sb .will works 10000% regard!

please is there someone to help me how i can complet my k700 cid36
with my original HWK

i succeded to revive this dead k700 with sonics cracked(not with HWK)
now it gives config.........

i tried to flash it with HWK it flashes only main then it die then i reflash it with sonics to revive it with config...error....

please show mr the real steps to get it work fine
i have only HWK original

hello,

your problem is mismatch FLASH CID n OTP CID, try to find a way to read your phones data so you will know what CID xx version you will use.

i did encounter that problem, i used usb smart to repair it. check recover certificate, do selected job. then flash main+fs checked complete phone then do selected job. after that unlock phone, all ok.

you can probably use the steps i made using your HWK, hope it will help you!


br
loloph ;)

i cant access my flash file since i updated my tornado 2 hwk any solution

i cant access my flash file since i updated my tornado 2 hwk any solution

hello,

try to contact your supplier for help on your problem.


br,
loloph

:D :D Hi to all
By the way k700 configuration error contact your servicenetwork center it means tha your phone must complet flash becaus there is a file messing it X_K700_CDA102298-84_R10A.bib this for HWK I test it I already have this problem but now is sloved with this method.

step1: flash MCU and select the tow file---X_K700_125822-EMEA6-MR2_000000_0000_R2AA{0102030301} and ----X_K700_125821_000000_0000_R2AA003{0102030301} phone must show config error .

step2: flash---X_K700_CDA102298-84_R10A.bib---- after finish phone must be OK OK OK OK work 1000000000000000%for me my phone now is fine and I'am happy

best regards:D ;)


ramoon

flash cu/fs then do int sb in hwk. OR use usb smart to repair it. check recover certificate, do selected job. then flash main+fs checked complete phone then do selected job. after that unlock phone, all ok.

guys its very simple to flash cid36 k700 because it will flash on k300 and u have to use all files of k700 the phone will complete and will 100%ok
wbr
sachin