Hi,

I buy two new Trium Mars. After unlocking one is good phone. Next one after registraiting on the Network work abaut 10 seconds and reset network. Phone work but all time connect and disconnect to network.
It is hardware or software dramage?
Can possible to fix it?

Thanks for help.

Regards,
amber.

Software - Repear Eprom - maybe work.

Hi first make a backup of eprom, after change the Eprom and try if this work, but remember if you change eprom change imei number and if this are new you lost your guarantee.

;)

Hi,

I can't desolder ATMEL eprom. Maybe exist
other way.

you needn`t to desolder eprom to read it! just use Blueflower eeprom reader/writer with Trium cable...

Platy

As it is said you don't have to desoulder eeprom just read it by cable if you find it hard with troky tool just put phone in test
mode with other soft like Martech and try again
don't forget to use the 5V on pin 12
regrads

Is it posible that mars doesnt want to go on the network because it has same imei as some other phones. I noticed that all the mars phones that are unlocked by flashing have same IMEI( because it is cloned). Maybe if he changes his IMEI it gona accept network.

Please correct me if I am wrong.

Regards
Me@n :rolleyes:

Hi
Both phones i bought in Germany and unlocked with program by Skeptik. I wasn't flash phones.
I can read eeprom but i don't know what to do next.
Phones is software ver.41A65000.
Thank for help.
Regards,
amber.

hi
It depends on your network.as i know some networks would not accept two phones with
the same IMEI

if your 112 emergensy call works your hardwear is ok
replly me
regards
gsnbhagawan

Hi,

Phone can make any calls.
Phone work but every time after 7 seconds disconnect from network and after 1 - 3 seconds connect to network. Phone work but all time connect and disconnect to network.
If i (or me)call when phone is connected all is OK. If i call when phone is disconnected conection is imposible.
Regards,
amber