hello i tried to unlock 1 sharp gx17 wiz thunderstorm and now wen i power on my phone it says START NG somebody please help to solve this




regards
ryaz

use Platijet flasher, modify tha usb cable (short 4-5 pin), use flasher driver,
and upload old DIAG (ver.: 03)

but firs PLS use tha Search button ;) old and solved problem....

friend pls tel me wat cable i modify?
the sharp gx15 cable or nec e6167 cable

i have flasher but dont know how to use it pls help me

u can help on msn : ryaz1993@hotmail.com

or yahoo: ryaz1993a@yahoo.com

or icq : 346-233-122

or sonork: 100.104481


pls help





regards
ryaz

ehhh
here tha step-by-step solution for lazy people :p

XP(!!)
1: remove tha battery
2: plug tha gx15 unlock cable, but first short 4-5 pin
3: install tha drivers (included tha: Flash cable drivers folder)
4: run tha prog
5: Flash control panel choose: download
6: Device panel: USB_blabala (DON'T TOUCH!)
7: Load file panel: Diag, scroll choice and load "unlocked diag.mot" (included)
8: Press Start Loading Flash
9: enjoy and don't forgot send me beer :D


79934

Everything is ok but when i push the button " Start loading flash" it gives me an error _ download error (0x04).Can you help me with tihs problem?
Do you have an ideea that will work??
PS 4-5 pin are in short.

1: do not use usb hub

2: show tha device panel: USB_blabala?
A: if not: driver or cable problem
B: If YES: try,try,try or another pc

hello frien , i am not able to install drivers

it gives me me this error


pls help me

hmmm
try:
manual copy tha gxdlusb.sys in c:\windows\system32\drivers
rename gxdlusb_fre.inf to gxdlusb.inf

yes show on device panel usb... and driver is ok.in device manager shows me the driver "sharp the upgrading tool usb driver version 0.90.0" but still doensn't work

sorry bro this is tha working methode...

sorry to bother you again...i did what you wrote me and rename the file but it still doesn't work. I wrote you before what the driver shows me :"sharp the upgrading tool usb driver version 0.90.0" .Is it ok to appear like this? Do you,maybe, have a picture with how the cable must look like? I mean the short between the 4-5 pin?

I guess my cable doesn't work............

mine 2 has same problem
but cable i made xactly as said shortern 4 and 5

pls help anyone


ryaz

use cable like furious cable for nec which sortened pin 8,9, & 10 ( or 7,8,9, i forgot !!) and then pin 4, 5 and then try again.

for many users down here the GX15_Upgrading_Tool_Installer
http://sharp.hacked.in/gx15/the%20gx...0installer.zip
just use an Original data cable used on Nec 616 ,and before start Paltijet must instal that: (GX15_Upgrading_Tool_Installer) so just Search.....than instal it , attach cable to phone without Battery, Open Platijet and you must see COM 1 now !
please do the jobs, and staRting ..FCK**** DIAG...
...than dont forget Say THX..!
enjoy

sm4rtboy

If the flasher detects the phone properly but when you click start you get an error, disconnect the cable, reconnect it, and immediately after the flasher detects the phone again, press start. Works 100%

sorry bro this is tha working methode...
I'v got this proplem.But the wirecomforum doesnt work. I dont know why.thx your helpful if it wont sucsesful,i vill look for you later.

for reparing star ng all flash file here http://www.gsmsassa.com/sharp/

If the flasher detects the phone properly but when you click start you get an error, disconnect the cable, reconnect it, and immediately after the flasher detects the phone again, press start. Works 100%


THANKS that was a problem.

If the flasher detects the phone properly but when you click start you get an error, disconnect the cable, reconnect it, and immediately after the flasher detects the phone again, press start. Works 100%


it is not enought to say U thanks

i was trying half hour to connect this phone

THANK YOU VERY MUCH

now phone is completely dead after flash


anyone can help me?



regards

ryaz

maybe bugs on phone ram, disconnect tha battery and wait half or one day
regards

no man now phone does not power at all

i remopved battery for more than a day

but nothing better i buy a phone for 95$ and return to customer



thanks\

for many users down here the GX15_Upgrading_Tool_Installer
http://sharp.hacked.in/gx15/the%20gx...0installer.zip
just use an Original data cable used on Nec 616 ,and before start Paltijet must instal that: (GX15_Upgrading_Tool_Installer) so just Search.....than instal it , attach cable to phone without Battery, Open Platijet and you must see COM 1 now !
please do the jobs, and staRting ..FCK**** DIAG...
...than dont forget Say THX..!
enjoy

sm4rtboy

Thanks for the sudden reply...
But the link u pase is not working for me..
also i have GX15_Upgrading_Tool_Installer
still my phones are not conecting..
I have more that 10 phones with me all are same....

If the flasher detects the phone properly but when you click start you get an error, disconnect the cable, reconnect it, and immediately after the flasher detects the phone again, press start. Works 100%

tanks very much ur soultion 100% work :)