If Siemens IMEI Writer has produced an error "EEPROM damaged", it is necessary for you:

1. Make a log-file with Log Reader (for sl45 - sl45_r.exe, for c45 -
c45_r.exe etc.).
For example, SL45_56CE86E2.ldb file has turned out.

2. Take any working map-file for LC Uploader, for ex. SL45_45BD75D1.lc and
rename it in SL45_56CE86E2.lc.

3. Now edit this SL45_56CE86E2.lc:

0000-0007 - your phone IMEI (15 numbers, last number always 0)
0008-000B - change 4 bytes to PhoneID your phone (0009-000C in ldb-file).

4. Start sl45_lcu.exe, select an option "Write Def. EEP", load
SL45_56CE86E2.lc and press Init Mobile.
Default eeprom it is written in the phone!

5. Now it is necessary to write the working map in the phone with Siemens IMEI Writer.



--------------------------------
Added:

New very simple solution:

1. Take any working map-file for LC Uploader, for ex. SL45_45BD75D1.lc for SL45 or CSME45_2BDA1FCA.lc for C45.

2. Now edit this file in hexeditor:

0008-000B - change 4 bytes to PhoneID your phone (0009-000C in ldb-file).

3. Start *_lcu.exe, select an option "Write Def. EEP", load corrected *.lc and press Init Mobile.
Default eeprom it is written in the phone!

4. Now it is necessary to write the working map in the phone with Siemens IMEI Writer.


This solution with *.lc files - http://groups.yahoo.com/group/edy_hp/files/Siemens/New%20solution%20for%20Siemens%20EEPROM%20damaged. rar



B.R.

Oke I Will send you 45 Lc workinf file for test

and what your email ???

I have added CSME45_.lc, but remember it's works only for C45, not for S45/ME45.

B.R.

aklab@pisem.net

Thank you aklab. I have one question:
How do I edit the *.lc file?
Is there any specific tool?

Thanks
Michael.

You may edit with any hex-editor: Hiew, Biew, Qview, HexWorkShop etc.

Example of edit SL45_45BD75D1.lc in hex-mode:

PhoneID---------------------------+----------+
00000000: 35 00 16 51 65 31 94 60 C2 2D BA A6 11 A0 47 04
IMEI------+--------------------+

Hi again
I've edited the .lc file as per your last post and loaded the file with the LogUploader.
When "Sending Application" ends it gives an error "No Data For This Phone".
Is this normal? and does the firmware version have anything to do with it?

Thanks a million.

Michael.

Hi aklab

You're great. Just absolutely GREAT .
It worked like a charm.
One has to pay attention to few small details, and it works for downgrading as well.

Man you are a saviour. I really appreciate your kind help.

Michael.

Hi

what changes do we make it phone id? do we have to change it too ?

PhoneID---------------------------+----------+
00000000: 35 00 16 51 65 31 94 60 C2 2D BA A6 11 A0 47 04
IMEI------+--------------------+

Hi Sher
As in Aklab's explanation, you have to change the phone ID.
If you're using the C45 LogReader, the Phone ID will be reversed . The Siemens Map Writer 3.00 would give you the correct ID, which you'll have to edit with Hexeditor of your choice.

That's all.
If it's not clear, mail me @ mperidakis@hotmail.com

I must tell you all that this method will unlock the mobile too.

Good luck

Michael.

is it really working?
well i coded a tool that does what'S in the describtion, select the lc u want to use and call it repairmap.dat
then run programm and u should have generated the lc u need!

plz test and let me know!

http://23clan.de/siemens_mapper_by_bleedr.zip

Hi BleedR
As I said earlier. It works like a charm.
I have had my C45 dead for the past 10 days. Tried every single trick in the book. Nothing worked.
This one not only did revive the mobile, but helped remove the SP lock and downgraded to firmware to the version of my choice.
What else could I ask for? :)

Best regards

Michael.

the link is not working...

can u fix it pls??

or send to my mail

mail adress (oruslento@hotmail.com)

tks

Good Tool, but not working my friends, create out by your tool different ( imei not same )

but I know you want help other, good luck

Originally posted by BleedR
is it really working?
well i coded a tool that does what'S in the describtion, select the lc u want to use and call it repairmap.dat
then run programm and u should have generated the lc u need!

plz test and let me know!

http://23clan.de/siemens_mapper_by_bleedr.zip

Hi BleedR
I downloaded the tool, but I guess you need to include a more detailed "readme" file.

Some people will undertake repairing their mobiles themselves, but they still need some info about how the tool works. An example in the help file would help.

Best of luck
Michael.

After flash the repair File from BleedR's Tool you must make a log with the SIEMENS logger 3.0 !

Woring 100% on S35 :D :D

Thks a lot guys!

@mperidakis

hi mate, what prog did u use to calculate *.ldb to come up with a *.lc and edit the file... did u use bleedR's ???

BR:rolleyes:

Hi Chryse
You can download the LogReaders/LogUploaders from www.gsmhacker.com (http://www.gsmhacker.com/sw/siemenslogger/LogReaders.zip) .

Best of luck

Michael.

hi thanks for prompt reply...

what does he meant about no.6 that it is necessary to write IMEI with Siemens IMEI Writer ???

what about the Siemens IMEI writer v3.00 that is free in the net and the Free Mapper... can we use it?

thanks man!

BR

Hi Chryse
After you're done with the LogUploader, the phone will still be dead (if it is) 'coz it still needs a new map.
I have used Map Writer v3.00, myself, and I quite assure you the my mobile is a re-born Siemens C45 :) .

If you feel you'd need more detailed info, pls email me and I'll be happy to lend a helping hand.

Best regards
Michael.

For unlock A3X/A40/SL45/SL45i you need Siemens A3X All Doer v3.00, for CSM35New - All Siemens Service Software v3.00, for C30 - Siemens CMS35 MAP creator, for old CMS35 – ZeeSiemensG3. Links to these free or cracked programs you will find on this forum.
For CSME45/S40 use paid services while there is no free calculator.
For revival of dead phones (except SME45/S40) use my solution or BleedR program, and WorkShops by PRO.
What it's necessary for entirety of happiness! :)

Is there any solution for downgrading s45 v 21 and over ?
Thanks

Ianek

Tryed on SL45 v52, done everything by the book,
upload eeprom succesfully write the map but phone only blinks
shortly.
So not worked.
Don't play whit SL45:cool:
After flashing V49 sometimes "wrong software"

Any ideea?


Best Regards.

hai aklab your solution is working in my A35 & C45 phone. but after phone power on, displayed Wrong Software. and i must make map files for a35 & c45. do you have solution is working without Map files. because i don't have c45 map maker. or maybe you have map maker for c45 program, please send me. thanks for all and sorry for my ENGLISH.

Dont play with toys if dint know what they do and how to fix it !!!
;) ;) ;)

Originally posted by peterwalt
Tryed on SL45 v52, done everything by the book,
upload eeprom succesfully write the map but phone only blinks
shortly.
So not worked.
Don't play whit SL45:cool:
After flashing V49 sometimes "wrong software"

Any ideea?


Best Regards.

Originally posted by Hary
hai aklab your solution is working in my A35 & C45 phone. but after phone power on, displayed Wrong Software. and i must make map files for a35 & c45. do you have solution is working without Map files. because i don't have c45 map maker. or maybe you have map maker for c45 program, please send me. thanks for all and sorry for my ENGLISH.

2masterross: :)


2All:
People!!! This solution is not intended for play with working phones!
It only for absolutely dead phones which do not switch on or only blinks shortly! But if your phone only is locked or writes on the screen " Wrong Software ", this solution not for you - you should use usual tools (Map Maker, Direct IMEI Writer etc.).
And one more nuance: even if your phone is absolutely dead, first, whenever possible, backup full flash or even EEPROM-area because with my solution you write universal Def. EEP and thus lose the Sensor Adjust Data, individual for each phone (customization of the transceiver, battery charging etc.). In most cases you at all will not see a difference but if the phone - your own, you will think, what he, perhaps, works not on all 100% As should work. :D


2Hary:
Sorry, but i don't have CSME45 map maker - try http://forum.gsmhosting.com/vbb/forumdisplay.php?s=&forumid=71

HI!

I have a C35 with B701 flash and with v24 soft.

Eeprom data is full damaged, thats why swup is not enought...

Is there a program which can fullflash it?

Ziemens and Martech CANNOT!

If i do Aklab solution, the lc uploader give the error message: "no data for this phone"

I hope it is because, that the logger cannot read the real phone ID, that's why when it tries to upload it isn't match with the ID in the "lc" file.

Thanks a lot,

Spinergy

@masteross
Phone was bad before;) ;) ;)
Managed to have him powered but not worked well.
Soo no problem for me.
"Dont play with toys if dint know what they do"
BTW I like toys.:D :D :D

Bye.

P.S.
"Dont play with toys if dint know what they do" if the toys are not
yours. You'll pay them.;) ;)

It's a live , It's a live :D :D

My C45 is a live thanks aklab . ;)

Best Regards.

@ KATOUE
have you make after it a log with the Siemens logger 3.0 ?

Hi mRoiZo83

In the final step I used NEW Siemens logger v4.0

Link >>> http://gsmunlocker.net/log

Good luck.

have you use http://23clan.de/siemens_mapper_by_bleedr.zip ???

@ mRoiZo83

No, I'v used working CSME45_.lc from ( aklab ).

Good luck.

You can also use my soft for write flash or only EEPROM from working phone. More info at www.keeper7.host.sk

Hi to All!

I found very simple solution. Today I needed to repair two SL45i v.54 and from the big laziness has decided to simplify this process. Also that I have understood: now it’s not necessary to rename lc-files, it’s not necessary to change IMEI. To deceive LCUploader and to force him to write Def. EEP only it is necessary to change ID in the lc-file. That's all! :D


2BleedR:

In your program there are two bugs:
1. Program reads from ldb only IMEI, and ID does not read, therefore ID in lc-file remains former.
2. CSME45.ldb differs from the others *.ldb - for CSME45 IMEI+ID starts with 0031h address, therefore lc-file it turns out incorrect. I think, that if it will be difficult for someone to change 4 bytes in the lc-file :), and he will require the program it is necessary to alter and simplify.

the link http://groups.yahoo.com/group/edy_h...M%20damaged.rar. is not working:(

Please send to my mail working CSME45_.lc from ( aklab ).



Thanks

I have replaced a file on yahoo. Correct link - http://groups.yahoo.com/group/edy_hp/files/Siemens/New%20solution%20for%20Siemens%20EEPROM%20damaged. rar

this link don't work also.

http://groups.yahoo.com/group/edy_h...M%20damaged.rar

yahoo's link is dificult to link.

hi

I tried your solution but when I turn on phone there is nothing on the display Phone works without card in it you can call emergency number but nothing on display

please help me

greetings

surfer2go

I don't understand this :0008-000B - change 4 bytes to PhoneID your phone .
Where I must change and what?
00000080 -
000000C0-
My phone Id is: CA 58 15 1F.I try to change on first 4 bytes(0123) but stil nothing.Please help,becuase I first time use hex editor.
Thanks

for example:
IMEI : 350673-54-123456-7
ID : 3BA1678A

in hex editor you must type in ROW :

00000000h: 35 06 73 54 12 34 56 70 3B A1 67 8A ..........etc
00000010h: ................... etc

Originally posted by Spinergy
HI!

I have a C35 with B701 flash and with v24 soft.

Eeprom data is full damaged, thats why swup is not enought...

Is there a program which can fullflash it?

Ziemens and Martech CANNOT!

If i do Aklab solution, the lc uploader give the error message: "no data for this phone"

I hope it is because, that the logger cannot read the real phone ID, that's why when it tries to upload it isn't match with the ID in the "lc" file.

Thanks a lot,

Spinergy


I have same problem

To somehex!
Read this:
http://forum.gsmhosting.com/vbb/showthread.php?threadid=42584

Regards Keni

I alrady hav read this topic.

Hi friends! I worked on 3 days and born to repair. I have a x35 flasher, I will send to anybody who can put it on free web page for everybody

Is this eeuploader or not?

@aklab

Before I tried to repair one SL45 everything done but the phone doesn't start.
Today made the same but I use new logger 4.0 for the map and phone is alive.
There is any known restrictions for SL45?
Must write map only whit new logger 4.0?
Phone seams to have also some hardware problems.

Best Regards.

I repair my dead M35 version 24.I download on version 5,then up to version 18 and then wit *.lc file corcted with my ID ,use X3X Cee repair and my phone is alive and unlocked.:) :) :)

(c45 v31>>>v14 and unlock) and another satisfied "customer" :))))

Don't work with flash b701 :(

it worked very fine on 2 a35 phones,they are alive again.
but one of them dont have any data on lcd !
is there any soliotion?:confused: