I need N95i pinout for 5x2 mini connector!
I try this one:
Nokia-N95(T99) 2 sim

connector_2x5_mini

1: +V
4: phone Rx (RJ45 pin 2)
5: phone Tx (RJ45 pin 3)
6: Gnd
10: connect to phone pin-1

This not work!
BR

I need N95i pinout for 5x2 mini connector!
I try this one:
Nokia-N95(T99) 2 sim

connector_2x5_mini

1: +V
4: phone Rx (RJ45 pin 2)
5: phone Tx (RJ45 pin 3)
6: Gnd
10: connect to phone pin-1

This not work!
BR

4: Rx
5: Tx
6: Gnd

@ .::KHURRAM::.
Thank you
but what to check in Intinity manu: Autodetect 6205-6227,6228 NOR or Autodetect 6228 NAND?
BR

it can't be connected :( i can't understand why.....
BR

@ .::KHURRAM::.
Thank you
but what to check in Intinity manu: Autodetect 6205-6227,6228 NOR or Autodetect 6228 NAND?
BR

if u get connected ur phone,then read full flash and then do format ffs or any other operation.

it can't be connected :( i can't understand why.....
BR

It's cable problem, wrong pinout. You must use correct cable and select correct COM port.

Due to a lot of different models with the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to make detailed description of model,
attach phone photo, phone bottom connector photo and information about Gnd and Charge pins on phone bottom connector.

After you have this information prepared, please, check the next detailed description how to get pinout for your model:

use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle.txt
if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7

all works OK!
Thank you!
@.::KHURRAM::.
it is correct pinout, thank you.
BR