full flash update verson but stil dead, any idea how to do?

chek uem>>>>>>>>>>>>

for 7610 flash with chiness files
it will be ok...........................100%

if ur set is not on after flashing so check volt in power butten if volt is come may problm in uem and also check ur set is short or not if short in ur set firstly found the short

u can try to rehot the flash ic test !!!

first change your firmware version then check flash chip and uem..

check the power button after wicth u considerd the panneel

can you see the NOKIA logo in the screen after flashing?

yes i can see ..........................................

Bro frist rehot the flash ic then try to flash latest version:):)

Hi friends i have a 6600 with white lcd i try to flash it with jaf and ufs also when i flash it with jaf it give me error on flash eraseing but when i try with ufs it flash complete but noting show on lcd still white but after that i full erase with fia then its flash complete again but still white lcd and doe's not write pm fail also.... any body have any trick and one thing else i also try to rehot display ic's reflow flash ic's and a little crystal ic near by bettery connector but not sucess full any body help......

BR
Omairbutt786

flash with older version still problem than it's UEM...

apply white screen slution (with out touch display ic) thats it


sarch>>>>>>>>

hey guys i have same problem, my 6600 after flashing completed.nokia logo showed
but i cant power on, nothing happen when i tried plug the charger.
but when i "boot in normal mode" using ufs, it boot normally...
any idea how to fix this 6600
thanks.

chek bsi line to uem!!!!!!!!!!!

:confused:
:confused:full flash update verson but stil dead, any idea how to do?

check the bsi ,32khz and 26mhz crystals:D

yeah i also have the same problem, got a 6600, flashes just fine and displays the nokia logo once flashed.
but it wont turn on.

can someone post a ppic of where on the circuit i need ot check?

thanks

Getting MCU ID

MCU ID: 0x1081
FLASH ID0: 9D0744BA <=> Flash ID not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 0
FLASH ID1: 46C0BC02 <=> Flash ID not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
FLASH ID2: 277E0001 <=> SPANSION -> Type not in database Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
First 16 bytes: 20 00 8C E2 00 00 8C E2 00 00 8C E2 00 00 8C E2
Checking RAM for ALGO...
Can't find flash loader for this phone...Aborting!

please help

Getting MCU ID

MCU ID: 0x1081
FLASH ID0: 9D0744BA <=> Flash ID not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 0
FLASH ID1: 46C0BC02 <=> Flash ID not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
FLASH ID2: 277E0001 <=> SPANSION -> Type not in database Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
First 16 bytes: 20 00 8C E2 00 00 8C E2 00 00 8C E2 00 00 8C E2
Checking RAM for ALGO...
Can't find flash loader for this phone...Aborting!

please help
you can just rehot the flash ic only after try one more time to int your phone because nokia some time can'i on and flash or on hang at nokia logo is flash ic problem only you just try :)

if i flash and finish it. but i can't see the nokia what should i do? thank's before.

flash with chiness files


if i flash and finish it. but i can't see the nokia what should i do? thank's before.

MayB ZocUs bro..

Help to be re-corrected

1 flash latest version
2 re hot rem
3 rebol rem
100% solution