Connecting to phone.......
Reading...
SW Version : V 05.81
06-02-08
RM-303
(c) Nokia
IMEI Plain : 352045025070136
Reading Backups..
Done! in Time: 0.00.00
Failed!
Failed!
Failed!
Failed!
All needed Backups Done!
LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 2340000100000000
PROVIDER : Virgin (some 3510i);United Kingdom
Blocks : 01
Key Code count: 0, F-Bus Code count: 0
BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED
Done!
Switch UFS to flashmode...
FLASH MODE: OK!

CMT Boot Data:
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 1B200217D6810254058A6BA906ACF69101A99542
HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID : 273F6D55DFAAF68F
CMT 1st Boot: OK!
Checking if hash is supported for unlocking...
HASH SUPPORTED FOR UNLOCK!)
BOOT [XSR1.6 BB5ALGORITHM]
Sending loader...
0x0000000000F172
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
CMT Flash ID : [0001003F-00008A21] >> Vendor: SPANSION >> Type: not in database
CMT Flash Data : 00000000000000000000000000000000
CMT MCID0 : 0xFFFF0000 - 0x00000000
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert...
Certificates sent: FAIL!


BR

Alex

nice update sir keep up good work, thank so much.......

Connecting to phone.......
Reading...
SW Version : V 05.81
06-02-08
RM-303
(c) Nokia
IMEI Plain : 352045025070136
Reading Backups..
Done! in Time: 0.00.00
Failed!
Failed!
Failed!
Failed!
All needed Backups Done!
LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 2340000100000000
PROVIDER : Virgin (some 3510i);United Kingdom
Blocks : 01
Key Code count: 0, F-Bus Code count: 0
BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED
Done!
Switch UFS to flashmode...
FLASH MODE: OK!

CMT Boot Data:
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 1B200217D6810254058A6BA906ACF69101A99542
HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID : 273F6D55DFAAF68F
CMT 1st Boot: OK!
Checking if hash is supported for unlocking...
HASH SUPPORTED FOR UNLOCK!)
BOOT [XSR1.6 BB5ALGORITHM]
Sending loader...
0x0000000000F172
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
CMT Flash ID : [0001003F-00008A21] >> Vendor: SPANSION >> Type: not in database
CMT Flash Data : 00000000000000000000000000000000
CMT MCID0 : 0xFFFF0000 - 0x00000000
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert...
Certificates sent: FAIL!


BR

Alex


it have the backups not written and the 308 too, so it stops when sending the pm308 to phone for calculation of unlocked sl buffer.

is it not possible to read full pm with this phone?

i need to try on monday with 5310.

moulinsky plz contact me per email: harald.kubovy@gmx.at
i can activate some special mode maybe i can solve this remotly.

We are supporting two forums for now, but sooner or later. We need to focus on one like the_lazer my hero...:D

Connecting to phone.......
Reading...
SW Version : V 05.81
06-02-08
RM-303
(c) Nokia
IMEI Plain : 352045025070136
Reading Backups..
Done! in Time: 0.00.00
Failed!
Failed!
Failed!
Failed!
All needed Backups Done!
LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 2340000100000000
PROVIDER : Virgin (some 3510i);United Kingdom
Blocks : 01
Key Code count: 0, F-Bus Code count: 0
BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED
Done!
Switch UFS to flashmode...
FLASH MODE: OK!

CMT Boot Data:
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 1B200217D6810254058A6BA906ACF69101A99542
HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID : 273F6D55DFAAF68F
CMT 1st Boot: OK!
Checking if hash is supported for unlocking...
HASH SUPPORTED FOR UNLOCK!)
BOOT [XSR1.6 BB5ALGORITHM]
Sending loader...
0x0000000000F172
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
CMT Flash ID : [0001003F-00008A21] >> Vendor: SPANSION >> Type: not in database
CMT Flash Data : 00000000000000000000000000000000
CMT MCID0 : 0xFFFF0000 - 0x00000000
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert...
Certificates sent: FAIL!


BR

Alex


okay... i tryed with my 6300i.
i think its same rom but 6300i have protected pm308 field.
í got the same error like you.
it seems i need to give this phones more time for stable local mode.


do as folows for testing:
1.) check the "manual localmode" checkbox
2.) press "unlock sl2 +" button
3.) now wait some seconds to give phone more time for local mode
then press "ok" button.

now backups should read finde ;)

i think i just need to make a little break for some seconds for these phones and it should work to.


hehe, it seems this is the same error witch some ppl have with reading full pm on these phones.
with "manual local" mode, i can read full pm of this phone witouth any problem.

i next update i make a little time break from 5 seconds (need to test the best time value) before start reading from and to phone, that should solve this problem.

yes it seems a little sleep with 3 seconds is enugh to solve the problem.

now with my 6300i unlocking is working:


Connecting to phone....
Reading...
SW Version : V 05.60
10-12-08
RM-337
(c) Nokia
IMEI Plain : 354830020107829
Reading Backups..
Field: 120, Subblock: 0, Bytes: 944 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 3, Bytes: 112 -> OK
PM Backup saved as: 354830020107829_120_BACKUP.pm
Done! in Time: 00:00:00
Field: 308, Subblock: 1, Bytes: 8192 -> OK
PM Backup saved as: 354830020107829_308_BACKUP.pm
Done! in Time: 00:00:05
All needed Backups Done!
LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
PROVIDER : Nokia Test Operator;Finnland
Blocks : 07
Key Code count: 0, F-Bus Code count: 0
Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Done!
Switch UFS to flashmode...
FLASH MODE: OK!

CMT Boot Data:
Asic Mode ID : 00
Asic EM ID : 00000353
Asic Public ID : 07D000110C7C7A566BA8843B1FEC141213447EDF
HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID : 191EC665DFAAF68F
CMT 1st Boot: OK!
Checking if hash is supported for unlocking...
HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
Sending Loader (0x3C00)
0x0000000000F172
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
CMT Flash ID : [0001003F-00008A21] >> Vendor: SPANSION >> Type: not in database
CMT Flash Data : 00000000000000000000000000000000
CMT MCID0 : 0xFFFF0000 - 0x00000000
Sending CMT Algo (0x02E4)
CMT ALG Boot: OK!
Sending Initial PM (0x11BC)
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x124 sent: OK!
Phone ack: 0x9372
Sending Simlock Cert. (0x0190)
Phone ack: 0x9372
SL Cert. Sent: OK!
Sending Rap Certificate v1 (0x1941)
Phone ack: 0xB372
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Unlocked PM saved as: 354830020107829_Created_Unlocked.pm
Done!




and full pm reading:

Reading Permanent Memory from: 0 to: 400...
Field: 1, Subblock: 0, Bytes: 114 -> OK
Field: 1, Subblock: 2, Bytes: 98 -> OK
Field: 1, Subblock: 4, Bytes: 110 -> OK
Field: 1, Subblock: 6, Bytes: 98 -> OK
Field: 1, Subblock: 8, Bytes: 110 -> OK
Field: 1, Subblock: 13, Bytes: 98 -> OK
Field: 1, Subblock: 16, Bytes: 86 -> OK
Field: 1, Subblock: 18, Bytes: 86 -> OK
Field: 1, Subblock: 20, Bytes: 86 -> OK
Field: 1, Subblock: 25, Bytes: 4 -> OK
Field: 1, Subblock: 29, Bytes: 6 -> OK
Field: 1, Subblock: 34, Bytes: 80 -> OK
Field: 2, Subblock: 0, Bytes: 1048 -> OK
Field: 4, Subblock: 1, Bytes: 800 -> OK
Field: 4, Subblock: 3, Bytes: 10 -> OK
Field: 4, Subblock: 4, Bytes: 8 -> OK
Field: 4, Subblock: 5, Bytes: 8 -> OK
Field: 4, Subblock: 6, Bytes: 8 -> OK
Field: 4, Subblock: 9, Bytes: 5 -> OK
Field: 4, Subblock: 18, Bytes: 80 -> OK
Field: 4, Subblock: 19, Bytes: 4 -> OK
Field: 4, Subblock: 21, Bytes: 4 -> OK
Field: 4, Subblock: 28, Bytes: 2 -> OK
Field: 8, Subblock: 0, Bytes: 2 -> OK
Field: 8, Subblock: 1, Bytes: 16 -> OK
Field: 8, Subblock: 2, Bytes: 16 -> OK
Field: 8, Subblock: 3, Bytes: 128 -> OK
Field: 8, Subblock: 4, Bytes: 128 -> OK
Field: 8, Subblock: 5, Bytes: 8 -> OK
Field: 8, Subblock: 7, Bytes: 4 -> OK
Field: 8, Subblock: 8, Bytes: 8 -> OK
Field: 11, Subblock: 0, Bytes: 4 -> OK
Field: 11, Subblock: 1, Bytes: 4 -> OK
Field: 11, Subblock: 2, Bytes: 4 -> OK
Field: 11, Subblock: 3, Bytes: 4 -> OK
Field: 11, Subblock: 4, Bytes: 1 -> OK
Field: 11, Subblock: 5, Bytes: 6 -> OK
Field: 11, Subblock: 6, Bytes: 2 -> OK
Field: 11, Subblock: 7, Bytes: 1 -> OK
Field: 11, Subblock: 8, Bytes: 1 -> OK
Field: 11, Subblock: 9, Bytes: 1 -> OK
Field: 11, Subblock: 10, Bytes: 1 -> OK
Field: 11, Subblock: 11, Bytes: 1 -> OK
Field: 11, Subblock: 12, Bytes: 1 -> OK
Field: 11, Subblock: 13, Bytes: 1 -> OK
Field: 11, Subblock: 14, Bytes: 2 -> OK
Field: 11, Subblock: 15, Bytes: 2 -> OK
Field: 11, Subblock: 16, Bytes: 2 -> OK
Field: 11, Subblock: 17, Bytes: 2 -> OK
Field: 11, Subblock: 18, Bytes: 16 -> OK
Field: 11, Subblock: 19, Bytes: 32 -> OK
Field: 11, Subblock: 20, Bytes: 32 -> OK
Field: 11, Subblock: 21, Bytes: 2 -> OK
Field: 11, Subblock: 22, Bytes: 2 -> OK
Field: 11, Subblock: 23, Bytes: 2 -> OK
Field: 11, Subblock: 24, Bytes: 2 -> OK
Field: 11, Subblock: 25, Bytes: 2 -> OK
Field: 11, Subblock: 26, Bytes: 2 -> OK
Field: 11, Subblock: 27, Bytes: 2 -> OK
Field: 11, Subblock: 28, Bytes: 2 -> OK
Field: 11, Subblock: 29, Bytes: 2 -> OK
Field: 11, Subblock: 30, Bytes: 2 -> OK
Field: 11, Subblock: 31, Bytes: 2 -> OK
Field: 11, Subblock: 32, Bytes: 2 -> OK
Field: 11, Subblock: 33, Bytes: 2 -> OK
Field: 11, Subblock: 34, Bytes: 2 -> OK
Field: 11, Subblock: 35, Bytes: 2 -> OK
Field: 11, Subblock: 36, Bytes: 2 -> OK
Field: 11, Subblock: 37, Bytes: 2 -> OK
Field: 11, Subblock: 38, Bytes: 2 -> OK
Field: 11, Subblock: 39, Bytes: 2 -> OK
Field: 11, Subblock: 40, Bytes: 2 -> OK
Field: 11, Subblock: 41, Bytes: 2 -> OK
Field: 11, Subblock: 42, Bytes: 2 -> OK
Field: 11, Subblock: 43, Bytes: 2 -> OK
Field: 11, Subblock: 44, Bytes: 2 -> OK
Field: 11, Subblock: 45, Bytes: 2 -> OK
Field: 11, Subblock: 46, Bytes: 2 -> OK
Field: 11, Subblock: 47, Bytes: 2 -> OK
Field: 11, Subblock: 48, Bytes: 2 -> OK
Field: 11, Subblock: 49, Bytes: 2 -> OK
Field: 11, Subblock: 50, Bytes: 2 -> OK
Field: 11, Subblock: 51, Bytes: 2 -> OK
Field: 11, Subblock: 52, Bytes: 2 -> OK
Field: 11, Subblock: 53, Bytes: 2 -> OK
Field: 11, Subblock: 54, Bytes: 2 -> OK
Field: 11, Subblock: 55, Bytes: 2 -> OK
Field: 11, Subblock: 56, Bytes: 2 -> OK
Field: 11, Subblock: 57, Bytes: 2 -> OK
Field: 11, Subblock: 58, Bytes: 2 -> OK
Field: 11, Subblock: 59, Bytes: 2 -> OK
Field: 11, Subblock: 60, Bytes: 2 -> OK
Field: 11, Subblock: 61, Bytes: 2 -> OK
Field: 11, Subblock: 62, Bytes: 2 -> OK
Field: 11, Subblock: 63, Bytes: 2 -> OK
Field: 11, Subblock: 64, Bytes: 2 -> OK
Field: 11, Subblock: 65, Bytes: 2 -> OK
Field: 11, Subblock: 66, Bytes: 4 -> OK
Field: 11, Subblock: 67, Bytes: 1 -> OK
Field: 11, Subblock: 68, Bytes: 4 -> OK
Field: 11, Subblock: 69, Bytes: 4 -> OK
Field: 11, Subblock: 70, Bytes: 4 -> OK
Field: 11, Subblock: 71, Bytes: 4 -> OK
Field: 11, Subblock: 72, Bytes: 16 -> OK
Field: 11, Subblock: 73, Bytes: 4 -> OK
Field: 11, Subblock: 74, Bytes: 2 -> OK
Field: 11, Subblock: 75, Bytes: 13 -> OK
Field: 12, Subblock: 0, Bytes: 102 -> OK
Field: 31, Subblock: 4, Bytes: 14 -> OK
Field: 44, Subblock: 0, Bytes: 1 -> OK
Field: 50, Subblock: 0, Bytes: 2 -> OK
Field: 54, Subblock: 0, Bytes: 2 -> OK
Field: 54, Subblock: 2, Bytes: 24 -> OK
Field: 88, Subblock: 0, Bytes: 36 -> OK
Field: 96, Subblock: 0, Bytes: 2 -> OK
Field: 96, Subblock: 1, Bytes: 20 -> OK
Field: 107, Subblock: 0, Bytes: 21 -> OK
Field: 107, Subblock: 1, Bytes: 89 -> OK
Field: 107, Subblock: 2, Bytes: 69 -> OK
Field: 107, Subblock: 3, Bytes: 70 -> OK
Field: 107, Subblock: 25, Bytes: 132 -> OK
Field: 107, Subblock: 26, Bytes: 12 -> OK
Field: 117, Subblock: 0, Bytes: 4 -> OK
Field: 117, Subblock: 1, Bytes: 3 -> OK
Field: 117, Subblock: 2, Bytes: 6 -> OK
Field: 117, Subblock: 3, Bytes: 1 -> OK
Field: 117, Subblock: 5, Bytes: 10 -> OK
Field: 117, Subblock: 6, Bytes: 8 -> OK
Field: 117, Subblock: 8, Bytes: 26 -> OK
Field: 117, Subblock: 13, Bytes: 3 -> OK
Field: 117, Subblock: 14, Bytes: 3 -> OK
Field: 117, Subblock: 16, Bytes: 40 -> OK
Field: 120, Subblock: 0, Bytes: 944 -> OK
Field: 120, Subblock: 1, Bytes: 80 -> OK
Field: 120, Subblock: 2, Bytes: 20 -> OK
Field: 120, Subblock: 3, Bytes: 112 -> OK
Field: 193, Subblock: 2, Bytes: 8 -> OK
Field: 193, Subblock: 3, Bytes: 32 -> OK
Field: 193, Subblock: 4, Bytes: 32 -> OK
Field: 193, Subblock: 8, Bytes: 228 -> OK
Field: 193, Subblock: 9, Bytes: 64 -> OK
Field: 217, Subblock: 0, Bytes: 32 -> OK
Field: 239, Subblock: 0, Bytes: 2 -> OK
Field: 239, Subblock: 1, Bytes: 3057 -> OK
Field: 239, Subblock: 2, Bytes: 3057 -> OK
Field: 308, Subblock: 0, Bytes: 1 -> OK
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Field: 308, Subblock: 3, Bytes: 1 -> OK
Field: 308, Subblock: 4, Bytes: 1 -> OK
Field: 308, Subblock: 5, Bytes: 10 -> OK
Field: 308, Subblock: 6, Bytes: 1 -> OK
Field: 308, Subblock: 7, Bytes: 1 -> OK
Field: 308, Subblock: 8, Bytes: 1 -> OK
Field: 308, Subblock: 9, Bytes: 40 -> OK
Field: 309, Subblock: 0, Bytes: 4 -> OK
Field: 309, Subblock: 1, Bytes: 2 -> OK
Field: 309, Subblock: 2, Bytes: 12 -> OK
Field: 309, Subblock: 4, Bytes: 12 -> OK
Field: 309, Subblock: 5, Bytes: 12 -> OK
Field: 309, Subblock: 7, Bytes: 12 -> OK
Field: 309, Subblock: 8, Bytes: 12 -> OK
Field: 309, Subblock: 17, Bytes: 12 -> OK
Field: 309, Subblock: 22, Bytes: 12 -> OK
Field: 313, Subblock: 0, Bytes: 173 -> OK
Field: 322, Subblock: 0, Bytes: 1 -> OK
Field: 334, Subblock: 0, Bytes: 1 -> OK
Field: 341, Subblock: 0, Bytes: 1 -> OK
Field: 341, Subblock: 3, Bytes: 4 -> OK
Field: 341, Subblock: 4, Bytes: 4398 -> OK
Field: 354, Subblock: 0, Bytes: 21 -> OK
PM Backup saved as: 35483002010782_0-400_BACKUP.pm
Done! 170 Subblock(s) in Time: 00:00:47




br.
hari ;)

hi mate
everytime i use your program i get this error gleitkommadivision durch null
i use jaf and ufs and win 7 and vista home premium
can you sudgest a fix please
cheers

hi mate
everytime i use your program i get this error gleitkommadivision durch null
i use jaf and ufs and win 7 and vista home premium
can you sudgest a fix please
cheers


normaly only win xp is supported.

but some ppl have problems with win xp too, caused of microsoft speech engine.

in new update i have ereased this feature for better compatibility.

what phone you try when you get this error? n95 8gb?
because for this phone you need to wait till i get a working sample phone for support it. i need to read ape for get the hash and so on...


@all

btw.
jaf interface support for unlocking is now ready and working for BAF3A9C3DBFA8454937DB77F2B8852B1 hash. but CAEE hash not work... :(


this is unlocking log of nokia 3120c with jaf interface:

Connecting to phone.
Reading...
SW Version : V 09.41
06-11-08
RM-364
(c) Nokia
IMEI Plain : 356070032954466
Reading Backups..
Field: 120, Subblock: 0, Bytes: 56 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 3, Bytes: 112 -> OK
PM Backup saved as: 356070032954466_120_BACKUP.pm
Done! in Time: 00:00:00
Field: 308, Subblock: 1, Bytes: 8192 -> OK
PM Backup saved as: 356070032954466_308_BACKUP.pm
Done! in Time: 00:00:04
All needed Backups Done!
LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000002
PROVIDER KEY : 2321000093172790
PROVIDER : 3 AT;Austria
Blocks : 01
Key Code count: 0, F-Bus Code count: 0
BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED
Done!
Switch JAF to Flashmode...
FLASHMODE: OK!

CMT Boot Data:
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 1790020583D98A560892AAC873F9A049EF467187
HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID : 273F6D55DFAAF68F
CMT 1st Boot: OK!
Checking if hash is supported for unlocking...
HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
0x550200003C3C00
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x124 sent: OK!
Phone ack: 0x5502
Sending Simlock Cert. (0x0190)
Phone ack: 0x5502
SL Cert. Sent: OK!
Sending Rap Certificate 21 v1 (0x1941)
Phone ack: 0x5502
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Connecting to phone..
Reading...
SW Version : V 09.41
06-11-08
RM-364
(c) Nokia
IMEI Plain : 356070032954466
UNLOCKING...
Field: 120, Subblock: 0, Bytes: 56 -> OK
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Done! Time: 00:00:01
Connecting to phone..
Reading...
SW Version : V 09.41
06-11-08
RM-364
(c) Nokia
IMEI Plain : 356070032954466

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0
BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN
Done!
All Done!

sir i can not repair my providr key 00000000000 to normal always failed the mobile is n95 and rm159 any help will be very thankfull.

N95 has not a PM120 so this tool can't help you about.
You can try using any other tool to repair the simlock and afterward to unlock it again or using cyclone unlocking it with "skip sp read"

BR

Alex

[QUOTE=oOXTCOo;5062893]normaly only win xp is supported.

but some ppl have problems with win xp too, caused of microsoft speech engine.

in new update i have ereased this feature for better compatibility.

what phone you try when you get this error? n95 8gb?
because for this phone you need to wait till i get a working sample phone for support it. i need to read ape for get the hash and so on...

hi
the phone was n85 but i get this error if theres no phone attached at all and another error message when i close the aplication
is there anyway round this
i.e. changeing compatability
thanks

Connecting to phone.....

Reading...
SW Version : V 07.00
19-08-08
RM-272
(c) Nokia.
IMEI Plain : 359830019394714


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.6.8]
[13:41:16 22.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.6 ***
[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY - DEMAGED! PHONE CANґT AUTHORIZE SX4!
help help help please!

[QUOTE=oOXTCOo;5062893]normaly only win xp is supported.

but some ppl have problems with win xp too, caused of microsoft speech engine.

in new update i have ereased this feature for better compatibility.

what phone you try when you get this error? n95 8gb?
because for this phone you need to wait till i get a working sample phone for support it. i need to read ape for get the hash and so on...

hi
the phone was n85 but i get this error if theres no phone attached at all and another error message when i close the aplication
is there anyway round this
i.e. changeing compatability
thanks


okay, maybe same problem.

i already done some compatibility changes, wait for next update then try again.

i have next update finished, but i need to do some tests tomorow with more phones, then i upload it to server.

when u try after new update please tell me if it is wokring for you.

i think tomorow is ready for download.

================================================== ==============================
WHATS NEW? (V2.6.9):
.) Addjusted JAF Flashbus Suppport for BB5+ SL2 Unlocking.
.) Fixed PM R/W for some Models.
.) Fixed Task Title.
Hint: If you face problems while unlocking or pm r/w connect F-Bus Adapter while
connecting to Phone, for some Phones you need to Press Power on Key while
J.A.U detecting the Phone.

================================================== ==============================

i want to ask is there a problem with the server?it seems it always gives error "maybe superdongle is damaged" eventhough the unit is good....

Connecting to phone..

Reading...
SW Version : V 1.0615.31
12-02-07
RM-227
(c) Nokia.
IMEI Plain : 3518780103alfox


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.6.9]
[02:45:56 23.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.6 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY DEMAGED! PHONE CANT AUTHORIZE SX4!

take note that im testing a good phone with no problem.i just test if the server is working and it seems like not working.is there a problem with server right now?or am i doing something wrong?tia

I can not use SX4,it shows :error!

New version 2.6.9 detected as virus by F-Secure as Gen:Trojan.Heur.jAWarHIuf5EQu please fix it ASAP. Waiting for your kind response.

Kind regards,

Vicky

i want to ask is there a problem with the server?it seems it always gives error "maybe superdongle is damaged" eventhough the unit is good....



take note that im testing a good phone with no problem.i just test if the server is working and it seems like not working.is there a problem with server right now?or am i doing something wrong?tia


sometimes internetspeed is to slow, this cause the same problem.

in next month i have ordered a faster better connection, i hope this will solve the problem.

you need to wait.

New version 2.6.9 detected as virus by F-Secure as Gen:Trojan.Heur.jAWarHIuf5EQu please fix it ASAP. Waiting for your kind response.

Kind regards,

Vicky


this is themida protection...

if you download only from official server then it is 100% virus free.
if you download from anything else i cant give garatie.

hallo harald kanst du bitte sagen welche modelle von den bb5+ sl2 handys sind supportet bei dein programm danke

hallo harald kanst du bitte sagen welche modelle von den bb5+ sl2 handys sind supportet bei dein programm zum entsperren danke

thank u dear for everything

Sir, can I write PM 120 to 7210c without using SX4 Authorization?

Hi there just ubnlocked a nokia E71 v300.21 with latest jau. Followed the youtube video....everything went through fine. Now when i power phone on after nokia logo phone switches off......any idea what this could be. It was a brand new sealed E71 on 3 network

呵呵!谢谢分享!但我不会用啊!就好像你们现在看我的回复一样!:confused::con fused:

Hi there just ubnlocked a nokia E71 v300.21 with latest jau. Followed the youtube video....everything went through fine. Now when i power phone on after nokia logo phone switches off......any idea what this could be. It was a brand new sealed E71 on 3 network


not possible...
please post me log to see, maybe simlock data is not correct...


write back the pm308 and the pm120 backups, phone should be okay again.

not possible...
please post me log to see, maybe simlock data is not correct...


write back the pm308 and the pm120 backups, phone should be okay again.

Ok when i write the pm308 and pm120 backups the phone is perfectly ok but back on the hutchinson network....When i write the unlocked pm onto the phone thats when i have the problem

Ok when i write the pm308 and pm120 backups the phone is perfectly ok but back on the hutchinson network....When i write the unlocked pm onto the phone thats when i have the problem


please copy the two backups to a save place to not overwrite it with defective data...
also better to make full pm backup and save to save place.

now try again to unlock and uncheck the "create only unlocked pm" checkbox.
after this you should get simlockstatus at the end with nothing changed, it must be locked but simlockstatus must be okay.

if till now all is correct write the unlocked created pm to phone.

now it should be unlocked.


what interface you are using? i have tested it with ufs and unlocked more then 10 pices from E71 v300.21.012 firmwares with this methode.
witouth secure watchdog problem or anything else.

with jaf i had no chance to test, cause i had not this phone in my hands for testing.

please post also the log, then i can see where is the problem.

please copy the two backups to a save place to not overwrite it with defective data...
also better to make full pm backup and save to save place.

now try again to unlock and uncheck the "create only unlocked pm" checkbox.
after this you should get simlockstatus at the end with nothing changed, it must be locked but simlockstatus must be okay.

if till now all is correct write the unlocked created pm to phone.

now it should be unlocked.


what interface you are using? i have tested it with ufs and unlocked more then 10 pices from E71 v300.21.012 firmwares with this methode.
witouth secure watchdog problem or anything else.

with jaf i had no chance to test, cause i had not this phone in my hands for testing.

please post also the log, then i can see where is the problem.

Ive been using JAF. I will use UFS box tomorow with me. and post results

Ive been using JAF. I will use UFS box tomorow with me. and post results


please try tomorow first again with jaf, to know if it is working with jaf interface or not...

you can not demage your phone aslong as you save the good pm backups...

if again not work with jaf interface, please post me the log.

with ufs it is 100% working, but i have seem sometimes with jaf interface unlocking fails on first try, then i need to write back the backups and try again.

on second try mostly work. i expect its the same with your phone.

with ufs no problems, it always work on first try.

i need to find out where is the problem with jaf interface, i think it need some time settings to work better.

please try tomorow first again with jaf, to know if it is working with jaf interface or not...

you can not demage your phone aslong as you save the good pm backups...

if again not work with jaf interface, please post me the log.

with ufs it is 100% working, but i have seem sometimes with jaf interface unlocking fails on first try, then i need to write back the backups and try again.

on second try mostly work. i expect its the same with your phone.

with ufs no problems, it always work on first try.

i need to find out where is the problem with jaf interface, i think it need some time settings to work better.

Ok no probs...just another thing i tried unlocking the phone on another pc....same thing happened...would switch off after nokia logo. I then tried writing back pm308 and pm 120 backups. Now the phone powers on with a blue sceeen and switches off. All this is done withj jaf interface so far as i do not have the ufs box with me. Tomorow i will try again and post results. Thank you for your support

Ok no probs...just another thing i tried unlocking the phone on another pc....same thing happened...would switch off after nokia logo. I then tried writing back pm308 and pm 120 backups. Now the phone powers on with a blue sceeen and switches off. All this is done withj jaf interface so far as i do not have the ufs box with me. Tomorow i will try again and post results. Thank you for your support


witouth log i can say nothing... i need realy some log to see what goes wrong.

before you try again to unlock, you need write back the good pm backups, cause
simlocks need to be okay!

I have made this thread sticky because it seems that this tool become more and more powerfull. I hope that these project will long alive.

Many thx for your great support here.

regards

I have made this thread sticky because it seems that this tool become more and more powerfull. I hope that these project will long alive.

Many thx for your great support here.

regards


thank you!

maybe you can rename the title to better fiting one?
without the: "first demo" or something.

i have some good ideas for this tool, but dont know if possible... if it will work you all have a big surprice ;)

i also have my e71 personal phone and i have a back up with its locked pm...later il try to write it back to locked phone and try to unlock it again with your new update.... il post result here with logs for proof...very nice update and thanks bro....btw if you dont minde me askin all bb5 sl2 phones and bb5 + phones are supported with this new update?im sure ur working with 9ddb hash right now....;)

I have deleted first demo in title, np!

What do u think about a little how to for these user who don´t have many experiences in Nokia unlocking. I don´t have used your tool till now but have done a look inside. I think newbees are confused which boxes have to be checked for example in main tab

I hope that u can put all your ideas to reality and that u can earn money in near future with it. We need more fresh people here like u. Take a look in the near past, there are some people like u who have done there way like cinek, vsh-gsm or many others.

And i think u will find your way also

regards

I have deleted first demo in title, np!

What do u think about a little how to for these user who don´t have many experiences in Nokia unlocking. I don´t have used your tool till now but have done a look inside. I think newbees are confused which boxes have to be checked for example in main tab

I hope that u can put all your ideas to reality and that u can earn money in near future with it. We need more fresh people here like u. Take a look in the near past, there are some people like u who have done there way like cinek, vsh-gsm or many others.

And i think u will find your way also

regards


yes i plan to make manuals in pdf format or direct to see on homepage for jau: www.entsperren.net/JAU (http://www.entsperren.net/JAU)

but fist i need to make it finished and tested.
as you see there are still some problems while unlocking with jaf as interface.
i need a list with all successfull unlocked phones and modems to but this on website.

not all bb5+ are supported.
only with this two hashes CAEEBB65D3C48E6DC73B49DC5063A2EE and BAF3A9C3DBFA8454937DB77F2B8852B1 witouth protected pm308 and with pm120 field.
and phones with ape now not work, i try to solve this when i get my next n95 8gb.
cause phones with ape need to read hash in little other way.


dont try with sl0 and sl1 phones! i dont know if i realy addjust this to jau, cause so many freetools support it, i can make other thinks in this time instead of addjusting these old phones.

i need the help of all users, please post me successfull and tested phones, to addjust in supported list.

first it was only a tool for ppl who know how to use it.
but now i whant to make it a more professional tool for everyone.




100% tested phones are:
3120c, 6120c, E66, E71, 6650D, 5610.

also 5310, 6500c, 6500s and so on should work, but i dont have tested it till now.

huawei modems supported:
all huawei usb sticks where code calculation is supported:
E159, E159G, E160, E161, E169, E169E, E169G, E1551, E155x......
E220 (all firmware versions), E960 Router

datacards too:
E800 is tested...

more need to be tested...

later i will sort the tabs better with own tab for nokia, huawei and so on...
in nokia you can find then new tabs about: unlocking, pm r/w, repair, rpl and so on...

also manuals from users are very welcome ;)
if someone have sucessfull unlocked a phone and whant to write a manual for us, please mail or post it to me!
i will but it to jau website and also you get full own login account for jau for your work ;)

IF YOU TEST PHONES WITH JAU, JUST MAKE BEFORE A FULL PM BACKUP WITH JAU AND SAVE IT TO SAVE PLACE ON YOUR HDD, IF SOMETHING GOES WRONG, YOU CAN EASY AND 100% REPAIR YOUR PHONE!
if you need help with this, ask me i help you to recover your phone back to life, but its easy, if something goes wrong you just need to write back this backup or its enugh to write back the pm120 and pm308 backups witch jau makes automaticaly.

J.A.U makes unlike other tools a full pm120 backup with all subblocks, so simlockkeys are stroed in too.
with this backup you can make simlock rpl from it too.
so you can 100% repair your phone...

but most of time jau dont comes to write the data while unlocking, cause if backup 308 is not readed it stops the unlocking process. and pm120 can be repaired direct with jau.

cant get this version 16.11 2009
J.A.U - Just Another Unlocker Update v2.6.5

hi mate
yes that did it working on windows 7
Reading CMT Boot Data: OK!

CMT Boot Data:
Asic ID: 000000010000022600010006400C192101031103
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 20E0000C2EB80158D4D89EB16ED62BDC5BF11EAB
HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE00000000
ROM ID: 4B9B75103E691FF8


Switch to F-BUS Mode: OK!
thanks
great program

Sir oOXTCOo, can I write Pm120 to 7210c without using SX4 Authorization?

Sir oOXTCOo, can I write Pm120 to 7210c without using SX4 Authorization?


yes you need ONLY for field 1 and 309 the sx4 authorization!

do u think i can test, or do u know anything about huawei k3565???

regards

;5069738']do u think i can test, or do u know anything about huawei k3565???

regards


should work, if jau cant calculate the code, send me the first 9 digit of the imei.

as promised heres my test result in experimenting my own personal phone..please check on this bro harald..;)

step 1 unlocking using jaf box with create only unlocked pm unchecked which means direct unlock

Connecting to phone..

Reading...
SW Version : V ICPR71_08w44.2
19-11-08
RM-346
(c) Nokia
IMEI Plain : 354855alfox
Reading Backups..
Field: 120, Subblock: 0, Bytes: 56 -> OK
Done! in Time: 12:00:00 AM
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 12:00:00 AM
Failed!
Done! in Time: 12:00:00 AM
Field: 120, Subblock: 3, Bytes: 112 -> OK
PM Backup saved as: 354855alfox_120_BACKUP.pm
Done! in Time: 12:00:00 AM
Field: 308, Subblock: 1, Bytes: 8192 -> OK
PM Backup saved as: 354855alfox_308_BACKUP.pm
Done! in Time: 12:00:04 AM
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 5150200000000000
PROVIDER : Globe Telecom;Philippines
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED

Done!
Switch JAF to Flashmode...
FLASHMODE: OK!

CMT Boot Data:

Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 062001150FAE0158067F9DE4F69E387DBD0E2351
HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID : 4B9B75103E691FF8
CMT 1st Boot: OK!

Checking if hash is supported for unlocking...
HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
0x550200C03AFA00
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x134 sent: OK!
Phone ack: 0x5502
Sending Simlock Cert. (0x0190)
Phone ack: 0x5502
SL Cert. Sent: OK!
Sending Rap Certificate 21 v1.0 (0x1931)
Phone ack: 0x5502
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
De-Crypt SL-Buffer...
SL buffer De-Crypted: OK!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Connecting to phone..

Reading...
SW Version : V ICPR71_08w44.2
19-11-08
RM-346
(c) Nokia
IMEI Plain : 354855alfox
UNLOCKING...
Field: 120, Subblock: 0, Bytes: 56 -> OK
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Done! Time: 12:00:01 AM
Connecting to phone..

Reading...
SW Version : V ICPR71_08w44.2
19-11-08
RM-346
(c) Nokia
IMEI Plain : 354855alfox


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN

Done!
All Done!


process was successful but when i turned on the phone its turned to "contact retailer"


step 2 still using jaf box with create only unlocked pm checked which means write the pm manually to unlock

Connecting to phone..

Reading...
SW Version : V ICPR71_08w44.2
19-11-08
RM-346
(c) Nokia
IMEI Plain : 354855alfox
Reading Backups..
Failed!
Done! in Time: 12:00:00 AM
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 12:00:00 AM
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 12:00:00 AM
Field: 120, Subblock: 3, Bytes: 112 -> OK
PM Backup saved as: 354855alfox_120_BACKUP.pm
Done! in Time: 12:00:00 AM
Field: 308, Subblock: 1, Bytes: 8192 -> OK
PM Backup saved as: 354855alfox_308_BACKUP.pm
Done! in Time: 12:00:04 AM
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 5150200000000000
PROVIDER : Globe Telecom;Philippines
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED

Done!
Switch JAF to Flashmode...
FLASHMODE: OK!

CMT Boot Data:

Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 062001150FAE0158067F9DE4F69E387DBD0E2351
HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID : 4B9B75103E691FF8
CMT 1st Boot: OK!

Checking if hash is supported for unlocking...
HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
0x550200C03AFA00
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x134 sent: OK!
Phone ack: 0x5502
Sending Simlock Cert. (0x0190)
Phone ack: 0x5502
SL Cert. Sent: OK!
Sending Rap Certificate 21 v1.0 (0x1931)
Phone ack: 0x5502
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
De-Crypt SL-Buffer...
SL buffer De-Crypted: OK!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Unlocked PM saved as: 354855alfox_Created_Unlocked.pm
Done!

Writing Permanent Memory...
Field: 120, Subblock: 0, Bytes: 56 -> OK
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Done! Time: 12:00:01 AM


Connecting to phone..

Reading...
SW Version : V ICPR71_08w44.2
19-11-08
RM-346
(c) Nokia
IMEI Plain : 354855alfox


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN

Done!


Result is still success with phone unlocked but i turned on the phone it shows same "contact retailer"

Step 3 i tried with my old ufs box and it cant seem to get good connection....always showing error for non connection between box and phone

Thanks for the opportunity bro and now i finally tested your new updatem,i guess a little bit of furnishing and this will be a blast....just tell me if anymore tricks or update so we can try with my personal phone....:D

here's full imei, need more info?


35585502675280

From 7210c Contact Service:


Reading CMT Boot Data: OK!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101033000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 0F600007E58D7C56815C30FE2B55B8AE7DC44DAD
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F


Switch to F-BUS Mode: OK!


THIS IS ONLY TEST, USE IT ON OWN RISK!
Switch to F-BUS Mode...
Switch to F-BUS Mode: OK!

Writing PM...
Field: 120, Record: 0, Len: 56 -> OK
Done!

Try to login but failed:

Contacting J.A.U - ACCESS Server..
[SERVER STATE: OK!]
[ACCESS DENIED!] Wrong Username or Password ......... what is the paswod and username for testing

I want to test the SX4 Authorization.....

I have here 7210c Contact Service...

@ ASHRIFF

Reading CMT Boot Data: OK!

CMT Boot Data:
Asic ID: 000000010000022600010006030C192101033000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 0F600007E58D7C56815C30FE2B55B8AE7DC44DAD
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F

not all bb5+ are supported.
only with this two hashes CAEEBB65D3C48E6DC73B49DC5063A2EE and BAF3A9C3DBFA8454937DB77F2B8852B1 witouth protected pm308 and with pm120 field.

Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.6.9]
[08:05:24 24.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.6 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY - DEMAGED! PHONE CAN´T AUTHORIZE SX4!


Unit: 7210c.... I think not yet supported

as promised heres my test result in experimenting my own personal phone..please check on this bro harald..;)

step 1 unlocking using jaf box with create only unlocked pm unchecked which means direct unlock



process was successful but when i turned on the phone its turned to "contact retailer"


step 2 still using jaf box with create only unlocked pm checked which means write the pm manually to unlock



Result is still success with phone unlocked but i turned on the phone it shows same "contact retailer"

Step 3 i tried with my old ufs box and it cant seem to get good connection....always showing error for non connection between box and phone

Thanks for the opportunity bro and now i finally tested your new updatem,i guess a little bit of furnishing and this will be a blast....just tell me if anymore tricks or update so we can try with my personal phone....:D


what is when you unlock your phone with zuleas unlocker, you have same "Contact Service" with your phone?

if not, please send me created unlocked pm from zuleas software and the unlocked pm from my software. cause i make the unlocked pm in a little bit other way.

==================================================

WHATS NEW? (V2.7.0):
.)Improved SX4 Authorization Process via J.A.U - SX4 Auth. Server!
Now the Speed of Auth. Process is 200% faster!
I hope this will fix the Problem of many ppl´s.


==================================================




//EDIT:

it is now tested by GUAR FORUM member see:




chandarakk
Associate
Join Date: Oct 2009
Posts: 15
Thanks: 46
Thanked 11 Times in 6 Posts



--------------------------------------------------------------------------------

Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.0]
[11:45:41 24.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.6 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Step2: OK!
Step3: OK!
SX4 Authorized Successfull!


now sx4 work fine thank for ur update

Sir oOXTCOo can you help my 6120c, i unlock it using jau for the first time, but there is a problem after unlocked.. the phone now auto off.. i don't know what to do.. heres the logs..

Connecting to phone....

Reading...
SW Version : V 03.83
18-06-07
RM-243
(c) Nokia
IMEI Plain : 359807017655882


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN

Done!





Connecting to phone....

Reading...
SW Version : V 03.83
18-06-07
RM-243
(c) Nokia
IMEI Plain : 359807017655882
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : FAILED!
ST_SECURITY_TEST : FAILED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!

i hope you can help me.. tia

Had you made any CRT (certificates)back up ? and also Full PM back up ?
Looks Like you damaged Sim lock and also Super Dongle_INVALID now so you phone restart every 3 mints or 30 minutes it self.

If you had made back up restore your phone will be in old locked condition without issue.

Else you need RPL file

or dead phone now without RPL

Sir oOXTCOo can you help my 6120c, i unlock it using jau for the first time, but there is a problem after unlocked.. the phone now auto off.. i don't know what to do.. heres the logs..


i hope you can help me.. tia


just write back the pm120 and the pm308 backups witch jau make automatically.

also save this two backups to a save place on your hdd, because you should not overwrite it.

after this your phone is in state before you unlocked it, but again locked.


then please send me the created unlocked pm to: harald.kubovy@gmx.at
and please make make a unlocked pm with zulea software and send me both.

i need to see where is the problem.

i think SX4 Auth is now working perfekt with phones witch are okay with superdongle key ;)

i have seen on server dubble more successfull authorizations like before!!!

please post some log or some reports if you test it...


seems that it was realy not a internet speed problem it was a timing problem ;)

what is when you unlock your phone with zuleas unlocker, you have same "Contact Service" with your phone?

if not, please send me created unlocked pm from zuleas software and the unlocked pm from my software. cause i make the unlocked pm in a little bit other way.

actually i have tried unlocking this phone with ub and cyclone....i dont use zulea sw,sorry...:) anyways is it ok if i send you pm unlocked from ub?il post it here later when i arrive at my shop...btw please check your pm i have some queries for you...tia

UPDATE:

Heres my Unlocked pm from UB bro harald

UNLOCKED PM (http://www.sendspace.com/file/vhmj9k)

is this sofware can unlock NOKIA 6260s? cause i search in this forum and no one post that they unlock phone? anyone here try to unlock that phone?

after a while without working with phones and back again with bussiness i havent realize how fast these things are working, ive been reading all this post, and of course i have to say thanks to everyone and specially to ooxtcoo, who made this possible, that everyone who had unlock some models, should post a log, should be better cause we wont see everybody asking more than two times the same question, if someone has unlock some models please post it with the log, it only will take you a few minutes, and you will help to this community!!! its just a tought!!!:)

thanks again to ooxtcoo to this program, i will make a donation to him, it will help you to research more programs, and stuff, and it will help me with nice info regard unlocking!!!;)

mandirigma06 (http://forum.gsmhosting.com/vbb/member.php?u=860919), i dont think so. We have to wait, or ask for codes!:rolleyes:

Phone Type: RM-84 (Nokia N70)
SW Version: V 05wk07v45 29-08-06 RM-84 (c) Nokia.
Imei plain: 35709300593091-6
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed

"RM-84" folder created.

Imei: 357093005930916
Version: SIMLOCK SERVER VERSION 58
Provider: Hutchinson 3G (3), Country: United Kingdom
Counter: 0/3, 0/10



can i reapair it ?

here is phone info

Connecting to phone....

Reading...
SW Version : V 05wk07v45
29-08-06
RM-84
(c) Nokia.
IMEI Plain : 357093005930916


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2342000000000000
PROVIDER : Hutchinson 3G (3);United Kingdom
Blocks : 04
Key Code count: 0, F-Bus Code count: 0

actually i have tried unlocking this phone with ub and cyclone....i dont use zulea sw,sorry...:) anyways is it ok if i send you pm unlocked from ub?il post it here later when i arrive at my shop...btw please check your pm i have some queries for you...tia

Cyclone Unlock it via NCK code calculation..

BR

Alex

MAYBE SUPERDONGLE KEY - DEMAGED! PHONE CAN´T AUTHORIZE SX4!




i face this error

Connecting to phone....

Reading...
SW Version : V ICPR71_09w22
29-05-09
RM-346
(c) Nokia
IMEI Plain : 3529240xxxxx2405


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.0]
[14:26:16 25.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.6 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY - DEMAGED! PHONE CAN´T AUTHORIZE SX4!

Connecting to phone....

Reading...
SW Version : V ICPR71_09w22
29-05-09
RM-346
(c) Nokia
IMEI Plain : 3529240xxxxx2405


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.0]
[14:26:16 25.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.6 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY - DEMAGED! PHONE CAN´T AUTHORIZE SX4!


then your phone cant make authorization.

see at guar forum, many ppl have successfully tested the sx4 auth server.
it is now working perfekt!

i also tested nokia 5200 successfully sx4 auth

then your phone cant make authorization.

see at guar forum, many ppl have successfully tested the sx4 auth server.
it is now working perfekt!
grüaß dich harald nur eine frage bitte wleche handys kann mann mit deiner programm entsperren danke im verraus

my E71 problem is turn off after 30 min

i need this solution

can't reper n70 rm-84 off afater 10-20min

onnecting to phone...........

Reading...
SW Version : V 05wk07v48
27-03-07
RM-84
(c) Nokia.
IMEI Plain : 357**************


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.0]
[14:56:46 25.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.6 ***
[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY - DEMAGED! PHONE CAN´T AUTHORIZE SX4!

grüaß dich harald nur eine frage bitte wleche handys kann mann mit deiner programm entsperren danke im verraus

Please write in english, otherwise it will be deleted

regards

http://i47.tinypic.com/14189wx.jpg

Anyone get this message???

Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net (http://ooxtcoo.dontexist.net/)
[ERROR] SX4 SERVER OFFLINE!
[ERROR] Please wait, maybe Server is Overloaded! Try in 10 Min. again...
[ERROR CODE] 10061

Reading...
SW Version: V ICPR72_09w17.3
11-05-09
RM-505
(c) Nokia
IMEI Plain:

Connecting to J.A.U SX4 Server: 85.127.139.165
[ERROR CODE] 10060

Reading...
SW Version: V ICPR72_09w17.3
11-05-09
RM-505
(c) Nokia
IMEI Plain:

Connecting to J.A.U SX4 Server: 85.127.139.165
[ERROR CODE] 10060


you both are using old version of jau...
you use very old version... cause since 2.5.8 or greater it dont uses this ip anymore...

grüaß dich harald nur eine frage bitte wleche handys kann mann mit deiner programm entsperren danke im verraus


bb5+ sl2 with the two hashes (and withouth protected pm308) i have already written... and no phones with ape, cause i need to implement something for this phones.

also dont forget to make backups and save to save place on your hdd just in case anything goes wrong.

Congratlation JAU are in Sticky Thread ... :p

my E71 problem is turn off after 30 min

i need this solution

You might need RPL to solve that. Check your IMEI first.

Anyone get this message???

Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net (http://ooxtcoo.dontexist.net/)
[ERROR] SX4 SERVER OFFLINE!
[ERROR] Please wait, maybe Server is Overloaded! Try in 10 Min. again...
[ERROR CODE] 10061


too mutch ppl used all slots... just wait some minutes and try again...

if something wrong, same message apears, server restart itself and is in 1 minute again online.

bro harald here is my unlocked pm...back up from UB...hope it can help to solve our contact retailer problem with E71....

http://www.sendspace.com/file/vhmj9k

I lost rpl of 5800 during unlock it with jau i have back up but i cannot restore it help plez???

Very Great. I have 5300and 7500 with contact service and trough selftest an error ST_SECURITY_TEST FAILED

Im used JAU v2.7.0. Made a sx4 authorisation and Write fields 1 and 309 from pm. Thats all and BIg thanx to author


Connecting to phone....

Reading...
SW Version : V 05.20
19-12-07
RM-249
(c) Nokia
IMEI Plain : 357685012917552
TEST RESULTS :
ST_SECURITY_TEST : PASSED!
Done!

hi can i just plug my usb modem dongle in my usb port and unlock it with this software
thanks craig

Very Great. I have 5300and 7500 with contact service and trough selftest an error ST_SECURITY_TEST FAILED

Im used JAU v2.7.0. Made a sx4 authorisation and Write fields 1 and 309 from pm. Thats all and BIg thanx to author


Connecting to phone....

Reading...
SW Version : V 05.20
19-12-07
RM-249
(c) Nokia
IMEI Plain : 357685012917552
TEST RESULTS :
ST_SECURITY_TEST : PASSED!
Done!

A good mode to say thanks is using the button Donate ;)
I did already as other people did

BR

Alex

I'm getting a message saying

Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[ERROR CODE] 10060

I'm runnig 2.7.0 Black Edition

Has anyone got any ideas?

Sam

hi can i just plug my usb modem dongle in my usb port and unlock it with this software
thanks craig

I'm getting a message saying

Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[ERROR CODE] 10060

I'm runnig 2.7.0 Black Edition

Has anyone got any ideas?

Sam

Check your firewall settings.. it is a winsock error

BR

Alex

Check your firewall settings.. it is a winsock error

BR

Alex



yes this error means that the computer can not connect to server.

this can have serveral reasons:
1.) server is offline or in maintanace - just try some minutes later
2.) your coomputer setting block connection - check firewall settings

i ordered some new hardware, cause i whant to see if am able to implement nck methode...

means i need now to wait, i look now to jau sx4 server, to make some improvements about user handling.

can anyone make the list of phones which can be unlocked by J.A.U

[COLOR=sienna]tested :[/COLOR]
[COLOR=sienna].) 6650D[/COLOR]
[COLOR=sienna].) E66 (+ v300 firmwares)[/COLOR]
[COLOR=sienna].) E71 (+ v300 firmwares) v300 firmware unlocking, see my video howto[/COLOR]
[COLOR=sienna].) 3120c[/COLOR]
[COLOR=sienna].) 6120c[/COLOR]

in theory this phones should work:
=================
* 3120C
* 3555
* 3555b
* 5310
* 5310b
* 5610
* 5610d
* 6263
* 6267
* 6300i
* 6301
* 6500S
* 6500C
* 6555
* 7500
* 7900
* 8800
Rapido SL2
============
* 5320
* 5800
* 6110
* 6120c
* 6121c
* N705i
* N706i
* 6124c
* 6210
* 6220c
* 6290
* 6600
* 6650
* E51
* E63
* E66
* E71
* E75
* N78
* N79
* N81
* N81 8gb
* N82
* N85
* N95 8gb
* N96

>>>>>>>>>>>>>> Check connection >>>>>>>>>>>>>>

Reading CMT Boot Data: OK!

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101013000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1AB00104D96F7F56BDBCFBAF00EBAFA0DDEB0FAC
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 273F6D55DFAAF68F

Switch to F-BUS Mode: OK!
>>>>>>>>>>>>>>> Backup >>>>>>>>>>>>>>>>>>
Backup
Connecting to phone....
Reading...
SW Version : V 09.42
07-11-08
RM-303
(c) Nokia
IMEI Plain : 354218038789822
Reading Backups..
Field: 120, Subblock: 0, Bytes: 56 -> OK
Done! in Time: 0:00:00
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 0:00:00
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 0:00:00
Field: 120, Subblock: 3, Bytes: 112 -> OK
PM Backup saved as: 354218038789822_120_BACKUP.pm
Done! in Time: 0:00:00
Field: 308, Subblock: 1, Bytes: 8192 -> OK
PM Backup saved as: 354218038789822_308_BACKUP.pm
Done! in Time: 0:00:06
All needed Backups Done!
>>>>>>>>>>>>>>>>Read PM>>>>>>>>>>>>>>>>>>>>>>>>>
PM read .
Reading Permanent Memory from: 0 to: 400...
Field: 1, Subblock: 0, Bytes: 12 -> OK
Field: 1, Subblock: 2, Bytes: 70 -> OK
Field: 1, Subblock: 3, Bytes: 70 -> OK
Field: 1, Subblock: 4, Bytes: 70 -> OK
Field: 1, Subblock: 6, Bytes: 276 -> OK
Field: 1, Subblock: 7, Bytes: 276 -> OK
Field: 1, Subblock: 8, Bytes: 276 -> OK
Field: 1, Subblock: 10, Bytes: 384 -> OK
Field: 1, Subblock: 11, Bytes: 384 -> OK
Field: 1, Subblock: 12, Bytes: 384 -> OK
Field: 1, Subblock: 14, Bytes: 384 -> OK
Field: 1, Subblock: 15, Bytes: 384 -> OK
Field: 1, Subblock: 16, Bytes: 384 -> OK
Field: 1, Subblock: 17, Bytes: 32 -> OK
Field: 1, Subblock: 19, Bytes: 16 -> OK
Field: 2, Subblock: 0, Bytes: 440 -> OK
Field: 4, Subblock: 1, Bytes: 800 -> OK
Field: 4, Subblock: 3, Bytes: 10 -> OK
Field: 4, Subblock: 4, Bytes: 8 -> OK
Field: 4, Subblock: 5, Bytes: 8 -> OK
Field: 4, Subblock: 6, Bytes: 8 -> OK
Field: 4, Subblock: 9, Bytes: 5 -> OK
Field: 4, Subblock: 18, Bytes: 80 -> OK
Field: 4, Subblock: 19, Bytes: 4 -> OK
Field: 4, Subblock: 28, Bytes: 2 -> OK
Field: 8, Subblock: 0, Bytes: 12 -> OK
Field: 8, Subblock: 1, Bytes: 12 -> OK
Field: 8, Subblock: 2, Bytes: 128 -> OK
Field: 8, Subblock: 3, Bytes: 128 -> OK
Field: 8, Subblock: 7, Bytes: 8 -> OK
Field: 8, Subblock: 8, Bytes: 8 -> OK
Field: 8, Subblock: 9, Bytes: 24 -> OK
Field: 11, Subblock: 0, Bytes: 4 -> OK
Field: 11, Subblock: 1, Bytes: 4 -> OK
Field: 11, Subblock: 2, Bytes: 4 -> OK
Field: 11, Subblock: 3, Bytes: 4 -> OK
Field: 11, Subblock: 4, Bytes: 1 -> OK
Field: 11, Subblock: 5, Bytes: 6 -> OK
Field: 11, Subblock: 6, Bytes: 2 -> OK
Field: 11, Subblock: 7, Bytes: 1 -> OK
Field: 11, Subblock: 8, Bytes: 1 -> OK
Field: 11, Subblock: 9, Bytes: 1 -> OK
Field: 11, Subblock: 10, Bytes: 1 -> OK
Field: 11, Subblock: 11, Bytes: 1 -> OK
Field: 11, Subblock: 12, Bytes: 1 -> OK
Field: 11, Subblock: 13, Bytes: 1 -> OK
Field: 11, Subblock: 14, Bytes: 2 -> OK
Field: 11, Subblock: 15, Bytes: 2 -> OK
Field: 11, Subblock: 16, Bytes: 2 -> OK
Field: 11, Subblock: 17, Bytes: 2 -> OK
Field: 11, Subblock: 18, Bytes: 16 -> OK
Field: 11, Subblock: 19, Bytes: 32 -> OK
Field: 11, Subblock: 20, Bytes: 32 -> OK
Field: 11, Subblock: 21, Bytes: 2 -> OK
Field: 11, Subblock: 22, Bytes: 2 -> OK
Field: 11, Subblock: 23, Bytes: 2 -> OK
Field: 11, Subblock: 24, Bytes: 2 -> OK
Field: 11, Subblock: 25, Bytes: 2 -> OK
Field: 11, Subblock: 26, Bytes: 2 -> OK
Field: 11, Subblock: 27, Bytes: 2 -> OK
Field: 11, Subblock: 28, Bytes: 2 -> OK
Field: 11, Subblock: 29, Bytes: 2 -> OK
Field: 11, Subblock: 30, Bytes: 2 -> OK
Field: 11, Subblock: 31, Bytes: 2 -> OK
Field: 11, Subblock: 32, Bytes: 2 -> OK
Field: 11, Subblock: 33, Bytes: 2 -> OK
Field: 11, Subblock: 34, Bytes: 2 -> OK
Field: 11, Subblock: 35, Bytes: 2 -> OK
Field: 11, Subblock: 36, Bytes: 2 -> OK
Field: 11, Subblock: 37, Bytes: 2 -> OK
Field: 11, Subblock: 38, Bytes: 2 -> OK
Field: 11, Subblock: 39, Bytes: 2 -> OK
Field: 11, Subblock: 40, Bytes: 2 -> OK
Field: 11, Subblock: 41, Bytes: 2 -> OK
Field: 11, Subblock: 42, Bytes: 2 -> OK
Field: 11, Subblock: 43, Bytes: 2 -> OK
Field: 11, Subblock: 44, Bytes: 2 -> OK
Field: 11, Subblock: 45, Bytes: 2 -> OK
Field: 11, Subblock: 46, Bytes: 2 -> OK
Field: 11, Subblock: 47, Bytes: 2 -> OK
Field: 11, Subblock: 48, Bytes: 2 -> OK
Field: 11, Subblock: 49, Bytes: 2 -> OK
Field: 11, Subblock: 50, Bytes: 2 -> OK
Field: 11, Subblock: 51, Bytes: 2 -> OK
Field: 11, Subblock: 52, Bytes: 2 -> OK
Field: 11, Subblock: 53, Bytes: 2 -> OK
Field: 11, Subblock: 54, Bytes: 2 -> OK
Field: 11, Subblock: 55, Bytes: 2 -> OK
Field: 11, Subblock: 56, Bytes: 2 -> OK
Field: 11, Subblock: 57, Bytes: 2 -> OK
Field: 11, Subblock: 58, Bytes: 2 -> OK
Field: 11, Subblock: 59, Bytes: 2 -> OK
Field: 11, Subblock: 60, Bytes: 2 -> OK
Field: 11, Subblock: 61, Bytes: 2 -> OK
Field: 11, Subblock: 62, Bytes: 2 -> OK
Field: 11, Subblock: 63, Bytes: 2 -> OK
Field: 11, Subblock: 64, Bytes: 2 -> OK
Field: 11, Subblock: 65, Bytes: 4 -> OK
Field: 11, Subblock: 66, Bytes: 1 -> OK
Field: 11, Subblock: 67, Bytes: 4 -> OK
Field: 11, Subblock: 68, Bytes: 4 -> OK
Field: 11, Subblock: 69, Bytes: 4 -> OK
Field: 11, Subblock: 70, Bytes: 4 -> OK
Field: 11, Subblock: 71, Bytes: 16 -> OK
Field: 11, Subblock: 72, Bytes: 4 -> OK
Field: 11, Subblock: 73, Bytes: 2 -> OK
Field: 11, Subblock: 74, Bytes: 13 -> OK
Field: 12, Subblock: 0, Bytes: 102 -> OK
Field: 31, Subblock: 4, Bytes: 14 -> OK
Field: 50, Subblock: 0, Bytes: 2 -> OK
Field: 54, Subblock: 0, Bytes: 2 -> OK
Field: 88, Subblock: 0, Bytes: 36 -> OK
Field: 96, Subblock: 0, Bytes: 24 -> OK
Field: 107, Subblock: 0, Bytes: 21 -> OK
Field: 107, Subblock: 1, Bytes: 89 -> OK
Field: 107, Subblock: 2, Bytes: 69 -> OK
Field: 107, Subblock: 3, Bytes: 70 -> OK
Field: 107, Subblock: 25, Bytes: 132 -> OK
Field: 107, Subblock: 26, Bytes: 12 -> OK
Field: 120, Subblock: 0, Bytes: 56 -> OK
Field: 120, Subblock: 1, Bytes: 80 -> OK
Field: 120, Subblock: 2, Bytes: 20 -> OK
Field: 120, Subblock: 3, Bytes: 112 -> OK
Field: 193, Subblock: 2, Bytes: 8 -> OK
Field: 193, Subblock: 3, Bytes: 32 -> OK
Field: 193, Subblock: 4, Bytes: 32 -> OK
Field: 193, Subblock: 9, Bytes: 64 -> OK
Field: 208, Subblock: 1, Bytes: 4 -> OK
Field: 217, Subblock: 0, Bytes: 32 -> OK
Field: 308, Subblock: 0, Bytes: 1 -> OK
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Field: 308, Subblock: 3, Bytes: 1 -> OK
Field: 308, Subblock: 4, Bytes: 1 -> OK
Field: 308, Subblock: 5, Bytes: 10 -> OK
Field: 308, Subblock: 6, Bytes: 1 -> OK
Field: 308, Subblock: 7, Bytes: 1 -> OK
Field: 308, Subblock: 8, Bytes: 1 -> OK
Field: 308, Subblock: 9, Bytes: 40 -> OK
Field: 309, Subblock: 0, Bytes: 4 -> OK
Field: 309, Subblock: 1, Bytes: 2 -> OK
Field: 309, Subblock: 2, Bytes: 12 -> OK
Field: 309, Subblock: 4, Bytes: 12 -> OK
Field: 309, Subblock: 5, Bytes: 12 -> OK
Field: 309, Subblock: 7, Bytes: 12 -> OK
Field: 309, Subblock: 8, Bytes: 12 -> OK
Field: 309, Subblock: 17, Bytes: 12 -> OK
Field: 322, Subblock: 0, Bytes: 1 -> OK
Field: 334, Subblock: 0, Bytes: 1 -> OK
Field: 341, Subblock: 0, Bytes: 1 -> OK
Field: 341, Subblock: 3, Bytes: 4 -> OK
Field: 341, Subblock: 4, Bytes: 4396 -> OK
Field: 354, Subblock: 0, Bytes: 3 -> OK
Field: 355, Subblock: 1, Bytes: 2028 -> OK
Field: 356, Subblock: 0, Bytes: 2 -> OK
Field: 356, Subblock: 1, Bytes: 8 -> OK
PM Backup saved as: 35421803878982_0-400_BACKUP.pm
Done! 155 Subblock(s) in Time: 0:00:51
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SX4 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Reading...
SW Version : V 09.42
07-11-08
RM-303
(c) Nokia
IMEI Plain : 354218038789822

Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.0]
[16:15:06 26.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.6 ***
[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Step2: OK!
Step3: OK!
SX4 Authorized Successfull!
>>>>>>>>>>>> Full PM Writ >>>>>>>>>>>>>>>>>>>>>>>>>>>
Writing Permanent Memory...
Field: 1, Subblock: 0, Packets: 1 Bytes: 12 -> OK
Field: 1, Subblock: 2, Packets: 1 Bytes: 70 -> OK
Field: 1, Subblock: 3, Packets: 1 Bytes: 70 -> OK
Field: 1, Subblock: 4, Packets: 1 Bytes: 70 -> OK
Field: 1, Subblock: 6, Packets: 3 Bytes: 276 -> OK
Field: 1, Subblock: 7, Packets: 3 Bytes: 276 -> OK
Field: 1, Subblock: 8, Packets: 3 Bytes: 276 -> OK
Field: 1, Subblock: 10, Packets: 4 Bytes: 384 -> OK
Field: 1, Subblock: 11, Packets: 4 Bytes: 384 -> OK
Field: 1, Subblock: 12, Packets: 4 Bytes: 384 -> OK
Field: 1, Subblock: 14, Packets: 4 Bytes: 384 -> OK
Field: 1, Subblock: 15, Packets: 4 Bytes: 384 -> OK
Field: 1, Subblock: 16, Packets: 4 Bytes: 384 -> OK
Field: 1, Subblock: 17, Packets: 1 Bytes: 32 -> OK
Field: 1, Subblock: 19, Packets: 1 Bytes: 16 -> OK
Field: 2, Subblock: 0, Packets: 4 Bytes: 440 -> OK
Field: 4, Subblock: 1, Packets: 7 Bytes: 800 -> OK
Field: 4, Subblock: 3, Packets: 1 Bytes: 10 -> OK
Field: 4, Subblock: 4, Packets: 1 Bytes: 8 -> OK
Field: 4, Subblock: 5, Packets: 1 Bytes: 8 -> OK
Field: 4, Subblock: 6, Packets: 1 Bytes: 8 -> OK
Field: 4, Subblock: 9, Packets: 1 Bytes: 5 -> OK
Field: 4, Subblock: 18, Packets: 1 Bytes: 80 -> OK
Field: 4, Subblock: 19, Packets: 1 Bytes: 4 -> OK
Field: 4, Subblock: 28, Packets: 1 Bytes: 2 -> OK
Field: 8, Subblock: 0, Packets: 1 Bytes: 12 -> OK
Field: 8, Subblock: 1, Packets: 1 Bytes: 12 -> OK
Field: 8, Subblock: 2, Packets: 2 Bytes: 128 -> OK
Field: 8, Subblock: 3, Packets: 2 Bytes: 128 -> OK
Field: 8, Subblock: 7, Packets: 1 Bytes: 8 -> OK
Field: 8, Subblock: 8, Packets: 1 Bytes: 8 -> OK
Field: 8, Subblock: 9, Packets: 1 Bytes: 24 -> OK
Field: 11, Subblock: 0, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 1, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 2, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 3, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 4, Packets: 1 Bytes: 1 -> OK
Field: 11, Subblock: 5, Packets: 1 Bytes: 6 -> OK
Field: 11, Subblock: 6, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 7, Packets: 1 Bytes: 1 -> OK
Field: 11, Subblock: 8, Packets: 1 Bytes: 1 -> OK
Field: 11, Subblock: 9, Packets: 1 Bytes: 1 -> OK
Field: 11, Subblock: 10, Packets: 1 Bytes: 1 -> OK
Field: 11, Subblock: 11, Packets: 1 Bytes: 1 -> OK
Field: 11, Subblock: 12, Packets: 1 Bytes: 1 -> OK
Field: 11, Subblock: 13, Packets: 1 Bytes: 1 -> OK
Field: 11, Subblock: 14, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 15, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 16, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 17, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 18, Packets: 1 Bytes: 16 -> OK
Field: 11, Subblock: 19, Packets: 1 Bytes: 32 -> OK
Field: 11, Subblock: 20, Packets: 1 Bytes: 32 -> OK
Field: 11, Subblock: 21, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 22, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 23, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 24, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 25, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 26, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 27, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 28, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 29, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 30, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 31, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 32, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 33, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 34, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 35, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 36, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 37, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 38, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 39, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 40, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 41, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 42, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 43, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 44, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 45, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 46, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 47, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 48, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 49, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 50, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 51, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 52, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 53, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 54, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 55, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 56, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 57, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 58, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 59, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 60, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 61, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 62, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 63, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 64, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 65, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 66, Packets: 1 Bytes: 1 -> OK
Field: 11, Subblock: 67, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 68, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 69, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 70, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 71, Packets: 1 Bytes: 16 -> OK
Field: 11, Subblock: 72, Packets: 1 Bytes: 4 -> OK
Field: 11, Subblock: 73, Packets: 1 Bytes: 2 -> OK
Field: 11, Subblock: 74, Packets: 1 Bytes: 13 -> OK
Field: 12, Subblock: 0, Packets: 1 Bytes: 102 -> OK
Field: 31, Subblock: 4, Packets: 1 Bytes: 14 -> OK
Field: 50, Subblock: 0, Packets: 1 Bytes: 2 -> OK
Field: 54, Subblock: 0, Packets: 1 Bytes: 2 -> OK
Field: 88, Subblock: 0, Packets: 1 Bytes: 36 -> OK
Field: 96, Subblock: 0, Packets: 1 Bytes: 24 -> OK
Field: 107, Subblock: 0, Packets: 1 Bytes: 21 -> OK
Field: 107, Subblock: 1, Packets: 1 Bytes: 89 -> OK
Field: 107, Subblock: 2, Packets: 1 Bytes: 69 -> OK
Field: 107, Subblock: 3, Packets: 1 Bytes: 70 -> OK
Field: 107, Subblock: 25, Packets: 2 Bytes: 132 -> OK
Field: 107, Subblock: 26, Packets: 1 Bytes: 12 -> OK
Field: 120, Subblock: 0, Packets: 1 Bytes: 56 -> OK
Field: 120, Subblock: 1, Packets: 1 Bytes: 80 -> OK
Field: 120, Subblock: 2, Packets: 1 Bytes: 20 -> OK
Field: 120, Subblock: 3, Packets: 2 Bytes: 112 -> OK
Field: 193, Subblock: 2, Packets: 1 Bytes: 8 -> OK
Field: 193, Subblock: 3, Packets: 1 Bytes: 32 -> OK
Field: 193, Subblock: 4, Packets: 1 Bytes: 32 -> OK
Field: 193, Subblock: 9, Packets: 1 Bytes: 64 -> OK
Field: 208, Subblock: 1, Packets: 1 Bytes: 4 -> OK
Field: 217, Subblock: 0, Packets: 1 Bytes: 32 -> OK
Field: 308, Subblock: 0, Packets: 1 Bytes: 1 -> OK
Field: 308, Subblock: 1, Packets: 69 Bytes: 8192 -> OK
Field: 308, Subblock: 3, Packets: 1 Bytes: 1 -> OK
Field: 308, Subblock: 4, Packets: 1 Bytes: 1 -> OK
Field: 308, Subblock: 5, Packets: 1 Bytes: 10 -> OK
Field: 308, Subblock: 6, Packets: 1 Bytes: 1 -> OK
Field: 308, Subblock: 7, Packets: 1 Bytes: 1 -> OK
Field: 308, Subblock: 8, Packets: 1 Bytes: 1 -> OK
Field: 308, Subblock: 9, Packets: 1 Bytes: 40 -> OK
Field: 309, Subblock: 0, Packets: 1 Bytes: 4 -> OK
Field: 309, Subblock: 1, Packets: 1 Bytes: 2 -> OK
Field: 309, Subblock: 2, Packets: 1 Bytes: 12 -> OK
Field: 309, Subblock: 4, Packets: 1 Bytes: 12 -> OK
Field: 309, Subblock: 5, Packets: 1 Bytes: 12 -> OK
Field: 309, Subblock: 7, Packets: 1 Bytes: 12 -> OK
Field: 309, Subblock: 8, Packets: 1 Bytes: 12 -> OK
Field: 309, Subblock: 17, Packets: 1 Bytes: 12 -> OK
Field: 322, Subblock: 0, Packets: 1 Bytes: 1 -> OK
Field: 334, Subblock: 0, Packets: 1 Bytes: 1 -> OK
Field: 341, Subblock: 0, Packets: 1 Bytes: 1 -> OK
Field: 341, Subblock: 3, Packets: 1 Bytes: 4 -> OK
Field: 341, Subblock: 4, Packets: 37 Bytes: 4396 -> OK
Field: 354, Subblock: 0, Packets: 1 Bytes: 3 -> OK
Field: 355, Subblock: 1, Packets: 18 Bytes: 2028 -> OK
Field: 356, Subblock: 0, Packets: 1 Bytes: 2 -> OK
Field: 356, Subblock: 1, Packets: 1 Bytes: 8 -> OK
Done! Time: 0:00:42
Connecting to phone....
Reading...
SW Version : V 09.42
07-11-08
RM-303
(c) Nokia
IMEI Plain : 354218038789822

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 2680100000000000
PROVIDER : Vodafone / Yorn;Portugal
Blocks : 01
Key Code count: 0, F-Bus Code count: 0
BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED
Done!
>>>>>>>>>>>>>>>> unlocking >>>>>>>>>>>>>>>>
Writing Permanent Memory...
Field: 120, Subblock: 0, Packets: 1 Bytes: 56 -> OK
Field: 308, Subblock: 1, Packets: 69 Bytes: 8192 -> OK
Done! Time: 0:00:07
Connecting to phone....
Reading...
SW Version : V 09.42
07-11-08
RM-303
(c) Nokia
IMEI Plain : 354218038789822

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0
BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN
Done!

Connecting to phone....
Reading...
SW Version : V 09.42
07-11-08
RM-303
(c) Nokia
IMEI Plain : 354218038789822
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!

Good work Hari ......

:::::::::::::::::::::::::::::::::::::::::::::::::: :::::::::::::

NEW UPDATE ON SX4 SERVER!!!

i have now improved user handling!

now jau sx4 server dont crashes anymore if already clinet is connected to server.

this means, if already someone make sx4 authorization, next clinet wait 3 seconds for connecting.

because i dont whanted to force all user to need update of new version i have done update only on server side.
means when you connect to server and someone is already connected jau waits some seconds thill it is connected to server.

i need now some testers, to stress the server so i can see if it is working well...

so if you have time, please try to make authorisations as mutch and fast as possible!

thanks!

br.
hari

hehe, it seems to be working very very well

Connecting to phone....
Reading...
SW Version : V 06.60
07-03-08
RM-242
(c) Nokia
IMEI Plain : 3548*********

Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.0]
[18:56:50 26.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.7 ***
[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Step2: OK!
Step3: OK!
SX4 Authorized Successfull!


it work great ....

unlocking work very Good .
Connecting to phone....
Reading...
SW Version : V 06.60
07-03-08
RM-242
(c) Nokia
IMEI Plain : 3548500*******
Reading Backups..
Field: 120, Subblock: 0, Bytes: 56 -> OK
Done! in Time: 0:00:00
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 0:00:00
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 0:00:00
Field: 120, Subblock: 3, Bytes: 112 -> OK
PM Backup saved as: 3548500******_120_BACKUP.pm
Done! in Time: 0:00:00
Field: 308, Subblock: 1, Bytes: 8192 -> OK
PM Backup saved as: 3548500*****_308_BACKUP.pm
Done! in Time: 0:00:06
All needed Backups Done!
LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 2680100000000000
PROVIDER : Vodafone / Yorn;Portugal
Blocks : 01
Key Code count: 0, F-Bus Code count: 0
BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED
Done!
Switch UFS to flashmode...
FLASH MODE: OK!

CMT Boot Data:
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 18B00206A7980254B81A126E8B16ED530FDB4A3D
HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID : 273F6D55DFAAF68F
CMT 1st Boot: OK!
Checking if hash is supported for unlocking...
HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
Sending Loader (0x3C00)
0x0000000000F172
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
CMT Flash ID : [00EC220C-00008921] >> Vendor: SAMSUNG (SEC) >> Type: K5G1257ATM
CMT Flash Data : 00000000000000000000000000000000
CMT MCID0 : 0xFFFF0000 - 0x00000000
Sending CMT Algo (0x02E4)
CMT ALG Boot: OK!
Sending Initial PM (0x11BC)
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x124 sent: OK!
Phone ack: 0x9372
Sending Simlock Cert. (0x0190)
Phone ack: 0x9372
SL Cert. Sent: OK!
Sending Rap Certificate v1 (0x1941)
Phone ack: 0xB372
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Unlocked PM saved as: 3548500*******_Created_Unlocked.pm
Done!

thanks to DigiPhone!

so we can say,

SUPPORTED TESTED NOKIA PHONES:
.) 3120c (tested by ooxtcoo)
.) 5310 (thanks digiphone)
.) 5610 (thanks digiphone)
.) 6120c (tested by ooxtcoo)
.) 6650D (tested by ooxtcoo)
.) E66 (tested by ooxtcoo)
.) E71 (tested by ooxtcoo)
.) E71 V300.21.012 (tested by ooxtcoo)

you are welcome .

and more well coming soon .

Great Soft .( JAU ):)

@ oOXTCOo

Im doing some tests with my old N80, and get error reading PM, SX4 works great.



Read Info:

Connecting to phone....

Reading...
SW Version : V 05wk33v42
07-05-07
RM-92
(c) Nokia.
IMEI Plain : 

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
PROVIDER : Nokia Test Operator;Finnland
Blocks : 07
Key Code count: 0, F-Bus Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Done!


Read PM ( allways fail in same part ):

Reading Permanent Memory from: 0 to: 400...

Field: 1, Subblock: 24, Bytes: 84 -> OK
Field: 1, Subblock: 31, Bytes: 84 -> OK
Field: 1, Subblock: 38, Bytes: 84 -> OK
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
Failed!
PM Backup saved as: 33
Done! 3 Subblock(s) in Time: 12:00:15 a.m.


SX4 auth: ( tested many times, and OK )

Connecting to phone....

Reading...
SW Version : V 05wk33v42
07-05-07
RM-92
(c) Nokia.
IMEI Plain : 

Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.0]
[23:08:48 26.11.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.6 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Step2: OK!
Step3: OK!
SX4 Authorized Successfull!



Read PM tested with DCTxBB5 2.0.9.0 and works ok


Reading PM: 0-400
Id: [1] 20 Record(s)
Record: 0, 114 byte(s), Ok
Record: 2, 98 byte(s), Ok
Record: 4, 110 byte(s), Ok
Record: 6, 98 byte(s), Ok
Record: 8, 110 byte(s), Ok
Record: 13, 98 byte(s), Ok
Record: 16, 98 byte(s), Ok
Record: 18, 98 byte(s), Ok
Record: 20, 98 byte(s), Ok
Record: 22, 16 byte(s), Ok
Record: 23, 4 byte(s), Ok
Record: 24, 84 byte(s), Ok
Record: 25, 4 byte(s), Ok
Record: 26, 110 byte(s), Ok
Record: 28, 98 byte(s), Ok
Record: 29, 6 byte(s), Ok
Record: 31, 98 byte(s), Ok
Record: 33, 36 byte(s), Ok
Record: 34, 80 byte(s), Ok
Record: 44, 182 byte(s), Ok
Id: [2] 1 Record(s)
Record: 0, 360 byte(s), Ok
Id: [3] 0 Record(s)
Id: [4] 9 Record(s)
Record: 0, 1 byte(s), Ok
Record: 1, 40 byte(s), Ok
Record: 2, 44 byte(s), Ok
Record: 3, 10 byte(s), Ok
Record: 4, 8 byte(s), Ok
Record: 5, 8 byte(s), Ok
Record: 6, 8 byte(s), Ok
Record: 9, 5 byte(s), Ok
Record: 16, 4 byte(s), Ok
Id: [7] 0 Record(s)
Id: [8] 6 Record(s)
Record: 0, 12 byte(s), Ok
Record: 1, 12 byte(s), Ok
Record: 2, 0 byte(s), Ok
Record: 3, 0 byte(s), Ok
Record: 6, 4 byte(s), Ok
Record: 7, 8 byte(s), Ok
Id: [11] 125 Record(s)
Record: 0, 4 byte(s), Ok
Record: 1, 4 byte(s), Ok
Record: 2, 4 byte(s), Ok
Record: 3, 4 byte(s), Ok
Record: 4, 1 byte(s), Ok
Record: 5, 6 byte(s), Ok
Record: 6, 1 byte(s), Ok
Record: 7, 2 byte(s), Ok
Record: 8, 2 byte(s), Ok
Record: 9, 2 byte(s), Ok
Record: 10, 2 byte(s), Ok
Record: 11, 2 byte(s), Ok
Record: 12, 1 byte(s), Ok
Record: 13, 1 byte(s), Ok
Record: 14, 1 byte(s), Ok
Record: 15, 1 byte(s), Ok
Record: 16, 1 byte(s), Ok
Record: 17, 1 byte(s), Ok
Record: 18, 1 byte(s), Ok
Record: 19, 2 byte(s), Ok
Record: 20, 2 byte(s), Ok
Record: 21, 1 byte(s), Ok
Record: 22, 1 byte(s), Ok
Record: 23, 4 byte(s), Ok
Record: 24, 4 byte(s), Ok
Record: 25, 2 byte(s), Ok
Record: 26, 2 byte(s), Ok
Record: 27, 2 byte(s), Ok
Record: 28, 2 byte(s), Ok
Record: 29, 1 byte(s), Ok
Record: 30, 1 byte(s), Ok
Record: 31, 1 byte(s), Ok
Record: 32, 1 byte(s), Ok
Record: 33, 1 byte(s), Ok
Record: 34, 1 byte(s), Ok
Record: 35, 1 byte(s), Ok
Record: 36, 1 byte(s), Ok
Record: 37, 1 byte(s), Ok
Record: 38, 2 byte(s), Ok
Record: 39, 2 byte(s), Ok
Record: 40, 2 byte(s), Ok
Record: 41, 2 byte(s), Ok
Record: 42, 2 byte(s), Ok
Record: 43, 4 byte(s), Ok
Record: 44, 4 byte(s), Ok
Record: 45, 4 byte(s), Ok
Record: 46, 1 byte(s), Ok
Record: 47, 16 byte(s), Ok
Record: 48, 2 byte(s), Ok
Record: 49, 2 byte(s), Ok
Record: 50, 20 byte(s), Ok
Record: 51, 10 byte(s), Ok
Record: 52, 2 byte(s), Ok
Record: 53, 20 byte(s), Ok
Record: 54, 10 byte(s), Ok
Record: 55, 1 byte(s), Ok
Record: 56, 1 byte(s), Ok
Record: 57, 1 byte(s), Ok
Record: 58, 1 byte(s), Ok
Record: 59, 1 byte(s), Ok
Record: 60, 1 byte(s), Ok
Record: 61, 1 byte(s), Ok
Record: 62, 1 byte(s), Ok
Record: 63, 1 byte(s), Ok
Record: 64, 1 byte(s), Ok
Record: 65, 1 byte(s), Ok
Record: 66, 32 byte(s), Ok
Record: 67, 32 byte(s), Ok
Record: 68, 2 byte(s), Ok
Record: 69, 2 byte(s), Ok
Record: 70, 2 byte(s), Ok
Record: 71, 2 byte(s), Ok
Record: 72, 2 byte(s), Ok
Record: 73, 2 byte(s), Ok
Record: 74, 2 byte(s), Ok
Record: 75, 2 byte(s), Ok
Record: 76, 2 byte(s), Ok
Record: 77, 2 byte(s), Ok
Record: 78, 2 byte(s), Ok
Record: 79, 2 byte(s), Ok
Record: 80, 2 byte(s), Ok
Record: 81, 2 byte(s), Ok
Record: 82, 2 byte(s), Ok
Record: 83, 2 byte(s), Ok
Record: 84, 2 byte(s), Ok
Record: 85, 2 byte(s), Ok
Record: 86, 2 byte(s), Ok
Record: 87, 2 byte(s), Ok
Record: 88, 2 byte(s), Ok
Record: 89, 2 byte(s), Ok
Record: 90, 2 byte(s), Ok
Record: 91, 2 byte(s), Ok
Record: 92, 2 byte(s), Ok
Record: 93, 2 byte(s), Ok
Record: 94, 2 byte(s), Ok
Record: 95, 2 byte(s), Ok
Record: 96, 2 byte(s), Ok
Record: 97, 2 byte(s), Ok
Record: 98, 2 byte(s), Ok
Record: 99, 2 byte(s), Ok
Record: 100, 2 byte(s), Ok
Record: 101, 2 byte(s), Ok
Record: 102, 2 byte(s), Ok
Record: 103, 2 byte(s), Ok
Record: 104, 2 byte(s), Ok
Record: 105, 2 byte(s), Ok
Record: 106, 2 byte(s), Ok
Record: 107, 2 byte(s), Ok
Record: 108, 2 byte(s), Ok
Record: 109, 2 byte(s), Ok
Record: 110, 2 byte(s), Ok
Record: 111, 2 byte(s), Ok
Record: 112, 2 byte(s), Ok
Record: 113, 4 byte(s), Ok
Record: 114, 4 byte(s), Ok
Record: 115, 1 byte(s), Ok
Record: 116, 4 byte(s), Ok
Record: 117, 4 byte(s), Ok
Record: 118, 4 byte(s), Ok
Record: 119, 4 byte(s), Ok
Record: 120, 16 byte(s), Ok
Record: 121, 4 byte(s), Ok
Record: 122, 2 byte(s), Ok
Record: 123, 2 byte(s), Ok
Record: 124, 1506 byte(s), Ok
Id: [12] 1 Record(s)
Record: 0, 102 byte(s), Ok
Id: [17] 1 Record(s)
Record: 0, 4 byte(s), Ok
Id: [21] 0 Record(s)
Id: [26] 0 Record(s)
Id: [29] 0 Record(s)
Id: [31] 0 Record(s)
Id: [35] 1 Record(s)
Record: 0, 10 byte(s), Ok
Id: [43] 0 Record(s)
Id: [44] 1 Record(s)
Record: 0, 1 byte(s), Ok
Id: [46] 0 Record(s)
Id: [50] 3 Record(s)
Record: 0, 2 byte(s), Ok
Record: 1, 30 byte(s), Ok
Record: 2, 22 byte(s), Ok
Id: [54] 1 Record(s)
Record: 0, 2 byte(s), Ok
Id: [88] 1 Record(s)
Record: 0, 36 byte(s), Ok
Id: [92] 1 Record(s)
Record: 0, 16 byte(s), Ok
Id: [94] 1 Record(s)
Record: 0, 40 byte(s), Ok
Id: [95] 2 Record(s)
Record: 0, 1 byte(s), Ok
Record: 1, 1 byte(s), Ok
Id: [96] 1 Record(s)
Record: 0, 24 byte(s), Ok
Id: [107] 5 Record(s)
Record: 0, 21 byte(s), Ok
Record: 1, 79 byte(s), Ok
Record: 2, 79 byte(s), Ok
Record: 3, 70 byte(s), Ok
Record: 25, 132 byte(s), Ok
Id: [112] 0 Record(s)
Id: [117] 8 Record(s)
Record: 0, 4 byte(s), Ok
Record: 1, 3 byte(s), Ok
Record: 2, 6 byte(s), Ok
Record: 3, 1 byte(s), Ok
Record: 5, 10 byte(s), Ok
Record: 6, 8 byte(s), Ok
Record: 13, 3 byte(s), Ok
Record: 14, 3 byte(s), Ok
Id: [118] 1 Record(s)
Record: 0, 1 byte(s), Ok
Id: [193] 4 Record(s)
Record: 2, 8 byte(s), Ok
Record: 3, 32 byte(s), Ok
Record: 4, 32 byte(s), Ok
Record: 9, 64 byte(s), Ok
Id: [208] 0 Record(s)
Id: [212] 0 Record(s)
Id: [239] 2 Record(s)
Record: 0, 2 byte(s), Ok
Record: 1, 2205 byte(s), Ok
Id: [291] 0 Record(s)
Id: [307] 0 Record(s)
Id: [308] 4 Record(s)
Record: 0, 1 byte(s), Ok
Record: 1, 8192 byte(s), Ok
Record: 3, 1 byte(s), Ok
Record: 4, 1 byte(s), Ok
Id: [309] 9 Record(s)
Record: 0, 4 byte(s), Ok
Record: 1, 2 byte(s), Ok
Record: 2, 12 byte(s), Ok
Record: 4, 12 byte(s), Ok
Record: 5, 12 byte(s), Ok
Record: 7, 12 byte(s), Ok
Record: 8, 12 byte(s), Ok
Record: 17, 12 byte(s), Ok
Record: 22, 12 byte(s), Ok
Id: [313] 1 Record(s)
Record: 0, 615 byte(s), Ok
Id: [326] 0 Record(s)
Id: [334] 0 Record(s)
PM Read Done 209 Record(s), Time: 01:07
Saved as Rm-92.pm, 33175 byte(s)


BR

THIS IS SECURITY UPDATE TO SAVE YOUR PHONES SIMLOCK DATA AND SX4 UPDATE!
YOU REALY NEED TO USE THIS LATEST VERSION!

==================================================
WHATS NEW? (V2.7.1):
.) J.A.U dont overwrite your already saved Backups while unlocking 2nd time now.
.) J.A.U you check if Phone have Protected PM308 field while Unlocking, this way
you can try to Unlock every Phone witouth end with invalid Simlock´s
If PM308 cant be written, J.A.U stops and dont write unprotected PM120 field.
Now you dont need to have fear if you not know if Phone have protected field.
.) Improved SX4 Auth. process, it is realy need to use latest J.A.U Version for
SX4 Authorization!
J.A.U show you now how mutch ppl before you.
SX4-Auth. will only work with this Version properly!


==================================================


you need realy use this latest version!



br.
hari ;)

Good experience!Many thanks to your sharing!!!

No Pakistan in Operators List.

calculation is totaly wrong

can i just plug my usb modem dongle in my usb port and unlock it with this software
thanks craig

hi . i have a 6500c that has gone contact service. i got this by unlocking . the pm was backed up b4 unlock and the selftest only fails on simlock. i have uploaded my backup pm file can anything be done.


after writing repair pm file

Connecting to phone.......

Reading...
SW Version : V 09.48
26-01-09
RM-265
(c) Nokia
IMEI Plain : 353099024421393


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 2343000000000000
PROVIDER : T-Mobile-One 2 One;United Kingdom
PROVIDER : Virgin;United Kingdom
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED

Done!


still contact service

hi . i have a 6500c that has gone contact service. i got this by unlocking . the pm was backed up b4 unlock and the selftest only fails on simlock. i have uploaded my backup pm file can anything be done.


after writing repair pm file

Connecting to phone.......

Reading...
SW Version : V 09.48
26-01-09
RM-265
(c) Nokia
IMEI Plain : 353099024421393


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 2343000000000000
PROVIDER : T-Mobile-One 2 One;United Kingdom
PROVIDER : Virgin;United Kingdom
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED

Done!


still contact service


your simlock table and imei seems to be okay.

plaese show selftest.

maybe security test fail.

can i just plug my usb modem dongle in my usb port and unlock it with this software
thanks craig


yes, first plug in your modem and install all needed drivers.
unplug usb modem and start jau.

select rigth tab (there are two diffrent huawei tabs, you need to select the rigth one).

check read code and unlock after read code and press do jobs button.

now and ONLY NOW connect your modem to detect it by jau and start unlocking.

No Pakistan in Operators List.


post me networkcode and networkname.

i addjust it in next update.

your simlock table and imei seems to be okay.

plaese show selftest.

maybe security test fail.


yes you are correct security test fail .


this is why i done, when i tried unlock 6500c was blinking and would not got to local mode . i done the following

1. full erase.
2. reflash higher version
3. rewrite backup rpl
4. write repaired pm

at no time was sx4 used.


do i need rpl to solve this?

yes you are correct security test fail .


this is why i done, when i tried unlock 6500c was blinking and would not got to local mode . i done the following

1. full erase.
2. reflash higher version
3. rewrite backup rpl
4. write repaired pm

at no time was sx4 used.


do i need rpl to solve this?


no, only if you have secure watchdog problem after...

but now you need to start jau...

connect phone to ufs or jaf
press sx4 auth
write pm 1 and pm 309 to phone

security test should now be passed and phone should be okay.

no, only if you have secure watchdog problem after...

but now you need to start jau...

connect phone to ufs or jaf
press sx4 auth
write pm 1 and pm 309 to phone

security test should now be passed and phone should be okay.

where do i get write pm 1 and pm 309 to phone from

where do i get write pm 1 and pm 309 to phone from




Writing Permanent Memory...
Field: 1, Subblock: 0, Packets: 2 Bytes: 114 -> OK
Field: 1, Subblock: 25, Packets: 1 Bytes: 4 -> OK
Field: 1, Subblock: 32, Packets: 1 Bytes: 4 -> OK
Field: 1, Subblock: 39, Packets: 1 Bytes: 4 -> OK
Field: 309, Subblock: 0, Packets: 1 Bytes: 4 -> OK
Field: 309, Subblock: 1, Packets: 1 Bytes: 2 -> OK
Field: 309, Subblock: 2, Packets: 1 Bytes: 12 -> OK
Done! Time: 00:00:01

will you be adding more phones like bb5 and dct4 ect to the software
this is great work
thanks craig

Country Name: Pakistan code +92

PFB Network names and their prefixes.

1. Mobilink - 0300, 0301, 0302, 0333, 0305, 0306, 0307, 0308
2. Telenor - 0342, 0343, 0344, 0345, 0346, 0347
3. ZONG - 0312, 0313, 0314, 0315
4. Warid - 0321, 0323

Tx.

post me networkcode and networkname.

i addjust it in next update.

Country Name: Pakistan code +92

PFB Network names and their prefixes.

1. Mobilink - 0300, 0301, 0302, 0333, 0305, 0306, 0307, 0308
2. Telenor - 0342, 0343, 0344, 0345, 0346, 0347
3. ZONG - 0312, 0313, 0314, 0315
4. Warid - 0321, 0323

Tx.

Pakistan code +92

5. Ufone - 0333, 0334, 0332, 0331, 0336

Also provide exclusive services in Pakistan
Brother Don't forget and requested to add this also

br,

363 Aruba (http://www.forsi.it/node/85#)

363 01 Setar
363 20 Digicell



365 Anguilla (http://www.forsi.it/node/85#)

365 10 Weblinks Limited



368 Cuba (http://www.forsi.it/node/85#)

368 01 Cubacel



370 Dominican Republic (http://www.forsi.it/node/85#)

370 01 Orange Dominicana
370 02 Compania Dominicana de Telefonos, C por A. (Claro)
370 03 Tricom S.A.
370 04 Centennial Dominicana



374 Trinidad and Tobago (http://www.forsi.it/node/85#)

374 12 TSTT
374 13 Digicel



400 Azerbaijan (http://www.forsi.it/node/85#)

400 01 Azercell
400 02 Bakcell
400 03 Catel
400 04 Nar Mobile



401 Kazakhstan (http://www.forsi.it/node/85#)

401 01 K-Mobile/Beeline/ Kar-Tel
401 02 K'Cell / JSC "Kazakhtelecom"
401 07 Dalacom / JSC "Altel"
401 77 NEO Telecom / JSC "Kazakhtelecom"



402 Bhutan (http://www.forsi.it/node/85#)

402 17 B-Mobile



404 unknown (http://www.forsi.it/node/85#)

404 01 AirCell Digilink
404 02 Airtel
404 03 Airtel / Bharti Telenet
404 04 Idea Cellular
404 05 Hutch / Fascel
404 06 Airtel
404 07 TATA Cellular / Idea Cellular
404 09 Reliance Telecom Private
404 10 Airtel
404 11 Essar / Sterling Cellular
404 12 Escotel Mobile Comms
404 13 Hutchison Essar South
404 14 Spice Communications / Modi Telstra Modicom
404 15 Aircell Digilink Essar Cellph.
404 20 Vodafone Mumbai (formerly Hutchison Maxtouch / Orange/ Hutch Mumbai)
404 21 BPL Mobile Mumbai
404 22 Idea Cellular Maharashtra & Goa
404 24 Idea Cellular
404 27 BPL USWest Cellular / Cellular Comms
404 30 Usha Martin Tel. Command
404 31 Airtel
404 34 BSNL
404 36 Reliance Telecom Private
404 38 BSNL
404 40 Airtel
404 41 RPG MAA
404 42 Srinivas Cellcom / Aircel
404 43 BPL Mobile Cellular
404 44 Spice
404 45 Airtel
404 46 BPL Cellular (Now vodafone)
404 49 Airtel
404 50 Reliance Telecom Private
404 51 BSNL
404 52 Reliance Telecom Private
404 53 BSNL
404 54 BSNL
404 55 BSNL
404 56 Escotel Mobile Communications Private
404 57 BSNL
404 58 BSNL
404 59 BSNL
404 60 Aircell Digilink
404 62 BSNL
404 64 BSNL
404 66 BSNL
404 67 Reliance Telecom Private
404 68 Mahanagar Telephone Nigam
404 69 DOLPHIN / Mahanagar Telephone Nigam
404 70 Airtel
404 71 BSNL
404 72 BSNL Kerala
404 73 BSNL
404 74 BSNL
404 75 BSNL / CellOne
404 76 BSNL
404 77 BSNL
404 78 BTA Cellcom
404 80 BSNL
404 81 BSNL
404 82 Escorts Telecom
404 83 Reliable Internet Services
404 84 Hutchison Essar South
404 85 Reliance Telecom Private
404 86 Hutchinson Essar South
404 87 Escorts Telecom
404 88 Escorts Telecom
404 89 Escorts Telecom
404 90 Airtel Maharashtra & Goa
404 92 Airtel Mumbai
404 93 Airtel Gujrat
404 94 Airtel
404 95 Airtel
404 96 Airtel
404 97 Airtel
404 98 Airtel



405 India (http://www.forsi.it/node/85#)

405 51 Airtel
405 52 Airtel
405 66 Hutch



410 Pakistan (http://www.forsi.it/node/85#)

410 01 Mobilink
410 03 UFONE
410 04 Paktel
410 06 Telenor
410 07 Warid



412 Afghanistan (http://www.forsi.it/node/85#)

412 01 Afghan Wireless Communication Company
412 20 Roshan
412 40 Areeba
412 50 Etisalat



413 Sri Lanka (http://www.forsi.it/node/85#)

413 01 Mobitel Lanka Ltd.
413 02 Dialog Telekom PLC.
413 03 Celtel Lanka Ltd / Tigo.
413 08 Hutch Sri Lanka.



414 Myanmar (http://www.forsi.it/node/85#)

414 01 Myanmar Post and Telecommunication



415 Lebanon (http://www.forsi.it/node/85#)

415 01 Alfa
415 03 MTC Touch



416 ****** (http://www.forsi.it/node/85#)

416 01 J.M.T.S. Fastlink
416 77 MobCom



417 Syria (http://www.forsi.it/node/85#)

417 01 SyriaTel
417 02 Spacetel Syria
417 09 Syrian Telecom Est. MOBILE



418 Iraq (http://www.forsi.it/node/85#)

418 01 Iraq Telecom



419 Kuwait (http://www.forsi.it/node/85#)

419 02 Mobile Telecoms / MTCNet
419 03 Wataniya



420 Saudi Arabia (http://www.forsi.it/node/85#)

420 01 Saudi Telecom / Ministry of PTT Al Jawal
420 07 Electronics App' Est. / EAE



421 Yemen (http://www.forsi.it/node/85#)

421 01 SabaFon
421 02 MTN



422 Oman (http://www.forsi.it/node/85#)

422 02 General Telecoms



424 United Arab Emirates (http://www.forsi.it/node/85#)

424 02 Etisalat
424 03 Emirates Integrated Telecommunications Company (du)



425 Israel (http://www.forsi.it/node/85#)

425 01 Orange
425 02 Cellcom
425 03 Pelephone
425 77 Mirs



426 Bahrain (http://www.forsi.it/node/85#)

426 01 Batelco
426 02 MTC-VFBH



427 Qatar (http://www.forsi.it/node/85#)

427 01 Q-Net / Q-Tel QATARNET



428 Mongolia (http://www.forsi.it/node/85#)

428 88 Unitel
428 99 Mobicom



429 Nepal (http://www.forsi.it/node/85#)

429 01 Nepal Telecommunications
429 02 Spice Nepal Pvt. Ltd.
429 03 United Telecom Ltd.



432 Iran (http://www.forsi.it/node/85#)

432 11 Mobile Communications Company of Iran / IR-MCI
432 14 Telecommunication Kish Co. (Kifzo)
432 19 Mobile Telecommunications Company of Esfahan (MTCE)
432 32 Taliya
432 35 MTN Irancell



434 Uzbekistan (http://www.forsi.it/node/85#)

434 01 Buztel
434 02 Uzmacom
434 04 Beeline
434 05 Coscom
434 07 MTS



436 Tajikistan (http://www.forsi.it/node/85#)

436 01 JC Somoncom
436 02 CJSC Indigo Tajikistan
436 03 TT mobile
436 04 Josa Babilon-T
436 05 CTJTHSC Tajik-tel



437 Kyrgyzstan (http://www.forsi.it/node/85#)

437 01 Bitel



438 Turkmenistan (http://www.forsi.it/node/85#)

438 01 Barash Communication Technologies (BCTI)
438 02 TM-Cell



Complete list here http://en.wikipedia.org/wiki/Mobile_network_code

BR

Alex

tryed to unlock modem but it still says wrong sim card inserted

Connecting...
Connected Successfully!
Reading Info...
================================================== =========
Vendor : HUAWEI
Model : E160
Version : 11.604.06.00.156
IMEI :
SIMLOCK : LOCKED!
CARDLOCK : ACTIVE!
================================================== =========
ENTER DIAG MODE...
DIAG MODE: OK!
DEVICE IS ALLREADY UNLOCKED!
================================================== =========
Done!

pls give link for this software...thanks in advance.

bro it is already posted many times in this thread ..............
Anyway here it is ..

www.entsperren.net

www.entsperren.net/JAU

is the JAU homepage, the other one is for austrian and german customers...

tryed to unlock modem but it still says wrong sim card inserted

Connecting...
Connected Successfully!
Reading Info...
================================================== =========
Vendor : HUAWEI
Model : E160
Version : 11.604.06.00.156
IMEI :
SIMLOCK : LOCKED!
CARDLOCK : ACTIVE!
================================================== =========
ENTER DIAG MODE...
DIAG MODE: OK!
DEVICE IS ALLREADY UNLOCKED!
================================================== =========
Done!


you using the wrong tab, you need to go to huawei calc / direct unlock tab, NOT to E220 / E960 unlocker tab.

also username and password how can i have one please...thanks

USERNAME: demo
PASSWORD: test

please write clear because i'm italian and not understand all.
No, unfortunatly i have received this phone, in this mode Key000000, provvider 0000000, and pm308 damage, i have various pm120 or pm308 or pm120&308 unlocked, the first when entered in my home this phone, i have zipped this, if do u want, for calcular un PM good, i post this, and i have need repair pm308, alls tools and box blocked in pm308 and sim lock status not passed.
i go for to see if possible post this to you, thank for your help, remember thath i'm italian and not understand all when you write sped, ok, thanx
Max

hi!

here is the first (very very early beta) version of Just Another Unlocker (PM120 Repair Tool (new)).

.) it supports at the moment ONLY the phones with hash: CAEEBB65D3C48E6DC73B49DC5063A2EE00000000
programm check if hash is supported...
.) it is NOT a reshacked version of known programms
.) make always backups, because as i sayed it is a totaly unfinished programm, at the moment it is just a demo
.) USE ONLY UFS, JAF support is not finished...
.) pm308 backup reading need mutch time (dont know way i try to solve this)
.) but unlocking is realy fast (after reading pm308) :p
.) you need to right the unlocked pm fields genereated with this unlocker with any tool like jaf, mt box, ufs or any other...
.) direct unlocking is in work...
.) sx4 server is the next
.) also other hashes is the next too...


please dont blame me if it dont work for you, because as i sayed this is the realy first demo and totaly unfinished, no real error handling and so on...

it is just to show you my first steps because all whant to see new version...
i still have many many work on this, and i planing to addjust other brands too... (maybe huawai modes, blackberry or somethink like that).
but first i have enugh work with this...


i did many work on it, with i dont whant to write here now, when iam finished with all, a give out a list of all...


here is new screenshot:

http://www.entsperren.net/JAU/JAU_DEMO.bmp



here you can download it: http://www.entsperren.net/JAU/JAU.zip


i have tested it with N0kia 6650D, E71 phones...
if you would like to test it, please report me if it has worked for you or not...

*yes i know, pm120 is bad written, i have seen it now, but now i need to go sleep, i corrrect this in next version...
if you whant test this software make all backups before and dont blame me for demaged phones i warned you... ;)

ps: i found my bug with sx4 auth, so when i finished sl2 unlock, i make sx4 auth server working too (also using local sx4 will working).

you can find the unlockbutton in "bb5" tab...
under settings you can set longer delay for phones with need more time for boot up in local mode...


br. hari

please write clear because i'm italian and not understand all.
No, unfortunatly i have received this phone, in this mode Key000000, provvider 0000000, and pm308 damage, i have various pm120 or pm308 or pm120&308 unlocked, the first when entered in my home this phone, i have zipped this, if do u want, for calcular un PM good, i post this, and i have need repair pm308, alls tools and box blocked in pm308 and sim lock status not passed.
i go for to see if possible post this to you, thank for your help, remember thath i'm italian and not understand all when you write sped, ok, thanx
Max

NEW UPDATE v2.7.2 READY!

WHATS NEW? (V2.7.2):
.) Fixed Unlocking Bug for some Phones. (5310 Successfully tested now)
.) Enabled possibility to Manual enter Network code if it is not in the list.
.) Addjusted Support for APE Phones! Now N95 8GB (and so on) unlocking shold
be possible but is not tested.
.) Reworked all old prozedures.
.) Some Bug fixes.

maybe you will notice that jau.exe is now little bit smoler then before, because
now i used my mutch better prozedures and erased the old bad working ones...

if someone tryes to unlock a phone with APE like N95 8GB, please let me know if it works...


br.
hari

I have two questions
How can I get a account to login in J.A.U and use all the functions?
There is any easy manual to repair simlock fail? Because I have one n95 and other n95-8gb with this problem. The imei is fine BUT I don't know the provider, I don't have any backup of these phones and I don't know how many locked blocks had before. Still, is possible to repair?

Thanks oOXTCOo and your team!
And good work!! :D

The N95-1 (rm-159) you can fix it doing unlock again (in some box as cyclone you can do doing the unlock with "skip SP read" thicked).
The RM-320 (Nokia N95 8gb) instead, read the product code on the lable under the battery and looks on google for "Product code xxxxxxx": you will find for sure some logs where you can get how many lines and which provvider it is locked to.

BR

Alex

Here is the log for N95 8gb RM-320
Hash not supported.........

Connecting to phone..

Reading...
SW Version : V 06wk41v46.1
13-11-07
RM-320
(c) Nokia
IMEI Plain : 3520610********
Reading Backups..
Field: 120, Subblock: 0, Bytes: 88 -> OK
Done! in Time: 12:00:00 AM
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 12:00:00 AM
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 12:00:00 AM
Field: 120, Subblock: 3, Bytes: 112 -> OK
PM Backup saved as: 352061022534271_120_BACKUP.pm
Done! in Time: 12:00:00 AM
Field: 308, Subblock: 1, Bytes: 8192 -> OK
PM Backup saved as: 352061022534271_308_BACKUP.pm
Done! in Time: 12:00:10 AM
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2341500000000000
PROVIDER : Vodafone;United Kingdom
Blocks : 02
Key Code count: 0, F-Bus Code count: 3

BLOCK 1:
LOCK 1: MCC+MNC STATUS: CLOSED
BLOCK 2:
LOCK 2: MCC+MNC (USIM) STATUS: CLOSED

Done!
Switch JAF to Flashmode...
FLASHMODE: OK!

CMT Boot Data:

Asic Mode ID : 71
Asic EM ID : FF141501
Asic Public ID : A7E1CD5A2909B9A875DB27AA2400000000011500
HASH : 2600010006400C192101021103020500
ROM ID : 9502050000000B22

CMT 1st Boot: OK!

Checking if hash is supported for unlocking...
HASH IS NOT SUPPORTED FOR UNLOCK!


Any ideas how to unlock..........

pls add next release local sx4 card funktion


b.r
senkron24

pls add next release local sx4 card funktion


b.r
senkron24


already since v.2.0.0 integrated.

just press "local sx4" button.

(no other smartcards should be connected)

Here is the log for N95 8gb RM-320
Hash not supported.........



Any ideas how to unlock..........


i will check it when i get n95 8gb in my hands...


i have tested it with normal n95 (witch dont have pm120, this is the reason way backup of 120 fail), but it works...


Connecting to phone...........

Reading...
SW Version : V 06wk41v59.1
02-06-08
RM-159
(c) Nokia
IMEI Plain : 3522550184******
Reading Backups..
Done! in Time: 00:00:00
Done! in Time: 00:00:00
Done! in Time: 00:00:00
PM Backup saved as: 3522550184*****_120_BACKUP.pm
Done! in Time: 00:00:00
Field: 308, Subblock: 1, Bytes: 8192 -> OK
PM Backup saved as: 3522550184*****_308_BACKUP.pm
Done! in Time: 00:00:05
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: FAIL!
Switch UFS to flashmode...
FLASH MODE: OK!

APE Boot Data :
Asic ID : 24200705
Asic Mode ID : 00
Asic Public ID : 2D6883C5E87AC6ABC57F8618BD8D2232B6B2CFF0
HASH : BA8710A7E1CD5A2909B9A875DB27AA24
ROM ID : 00000000011500

CMT Boot Data :
Asic ID : 000000010000022600010006400C192101011103
Asic Mode ID : 00
Asic EM ID : 00000B21
Asic Public ID : 17D00010CE440058FFA07A69BF0C63183339CA16
HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID : F2C6EBADC86E6189
CMT 1st Boot : OK!

HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
Sending Loader (0x3AC0)
0x0000000000F172
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
CMT Flash ID : [00010035-00006921] >> Vendor: SPANSION >> Type: 72NS128N
CMT Flash Data : 00000000000000000000000000000000
CMT MCID0 : 0xFFFF0000 - 0x00000000
Sending CMT Algo (0x02E4)
CMT ALG Boot: OK!
Sending Initial PM (0x11C4)
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x134 sent: OK!
Phone ack: 0x9372
Sending Simlock Cert. (0x0190)
Phone ack: 0x9372
SL Cert. Sent: OK!
Sending Rap Certificate 21 v1.0 (0x1931)
Phone ack: 0xB372
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
De-Crypt SL-Buffer...
SL buffer De-Crypted: OK!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Unlocked PM saved as: 3522550184*****_Created_Unlocked.pm
Done!

already since v.2.0.0 integrated.

just press "local sx4" button.

(no other smartcards should be connected)

big thanks for great software

i have see after login :)


ps: meister das wird ja richtig gut !!!!!!!!!!

thanks OOXtcoo for ur software but i get this for 3110 cont serv and provider key 00000000 on jaf and simlock status failed on jau pl reply me urgent
Connecting to phone....

Reading...
SW Version : V 07.21
05-11-08
RM-237
(c) Nokia.
IMEI Plain : 353203034108178
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : FAILED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!

i have tested with local sx4 card

this option not work with pkey reader ???
whts reder work pls more info

b.r
senkron24

triing to unlock E71 V300, but after unlock phone starts and shut down immediatly. After writing pm309 and 120 back phone starts but is locked back. I push BB5 unlock ( and unselested `Create only unlock PM`).

Where do i make mistake?

Connecting to phone..

Reading...
SW Version : V ICPR71_09w22
29-05-09
RM-346
(c) Nokia
IMEI Plain : 358240032235095
Reading Backups..
Field: 120, Subblock: 0, Bytes: 56 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 3, Bytes: 112 -> OK
Skip saving, Backups allready exists!
Done! in Time: 00:00:00
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Skip saving, Backups allready exists!
Done! in Time: 00:00:04
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 2080100000000000
PROVIDER : Orange + France Telecom Itineris;France
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED

Done!
Switch JAF to Flashmode...
FLASHMODE: OK!

CMT Boot Data :
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 12B0010649AF8B521AC63A98851A039A81FA5A4E
HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID : 4B9B75103E691FF8
CMT 1st Boot : OK!

HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
0x550200C03AFA00
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x134 sent: OK!
Phone ack: 0x5502
Sending Simlock Cert. (0x0190)
Phone ack: 0x5502
SL Cert. Sent: OK!
Sending Rap Certificate 21 v1.0 (0x1931)
Phone ack: 0x5502
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
De-Crypt SL-Buffer...
SL buffer De-Crypted: OK!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Connecting to phone..

Reading...
SW Version : V ICPR71_09w22
29-05-09
RM-346
(c) Nokia
IMEI Plain : 358240032235095
UNLOCKING...
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Field: 120, Subblock: 0, Bytes: 56 -> OK
Done! Time: 00:00:01
Connecting to phone..

Reading...
SW Version : V ICPR71_09w22
29-05-09
RM-346
(c) Nokia
IMEI Plain : 358240032235095


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN

Done!
All Done!

i used last version V272. After unlock ST-sec fail

triing to unlock E71 V300, but after unlock phone starts and shut down immediatly. After writing pm309 and 120 back phone starts but is locked back. I push BB5 unlock ( and unselested `Create only unlock PM`).

Where do i make mistake?

e71 version v300 as far as i am aware is not possible with free unlock. better to return e71 to normal ie write field 1 and 309 and return back to customer.

if you want to unlock then you must buy the new credits depending on which box you have.

information

Reading...
MCU SW version: V 07.21
05-11-08
RM-217
(c) Nokia.
PCI version:
RFIC version: 17211721
DSP version:
ICPR61_08w10
PPM version: V 07.21
05-11-08
RM-217
(c) Nokia.
A
BT MCM version: 06cc-P9.1
Retu version: 32
Tahvo version: 53
Content Pack version: Content: a
V 07.21
05-11-08
RM-217
(c) Nokia.

Production serial number:
Product code:
Module code:
Basic production code:
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 35981101473xxxx
IMEI spare to net: 3A 95 18 01 41 37 53 09
IMEI SV to net: 33 95 18 01 41 37 53 29 F5

LOCK STATUS:

CONFIG KEY: 8000000000000006
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN



onnecting to phone...

Reading...
SW Version : V 07.21
05-11-08
RM-217
(c) Nokia.
IMEI Plain : 35981101473xxxx
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!


when try sx4 auth

Connecting to phone..

Reading...
SW Version : V 07.21
05-11-08
RM-217
(c) Nokia.
IMEI Plain : 35981101473xxxx


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.6.6]
[13:51:24 02.12.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.9 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY DEMAGED! PHONE CANT AUTHORIZE SX4!

any solution !

information

Reading...
MCU SW version: V 07.21
05-11-08
RM-217
(c) Nokia.
PCI version:
RFIC version: 17211721
DSP version:
ICPR61_08w10
PPM version: V 07.21
05-11-08
RM-217
(c) Nokia.
A
BT MCM version: 06cc-P9.1
Retu version: 32
Tahvo version: 53
Content Pack version: Content: a
V 07.21
05-11-08
RM-217
(c) Nokia.

Production serial number:
Product code:
Module code:
Basic production code:
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 35981101473xxxx
IMEI spare to net: 3A 95 18 01 41 37 53 09
IMEI SV to net: 33 95 18 01 41 37 53 29 F5

LOCK STATUS:

CONFIG KEY: 8000000000000006
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN



onnecting to phone...

Reading...
SW Version : V 07.21
05-11-08
RM-217
(c) Nokia.
IMEI Plain : 35981101473xxxx
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!


when try sx4 auth

Connecting to phone..

Reading...
SW Version : V 07.21
05-11-08
RM-217
(c) Nokia.
IMEI Plain : 35981101473xxxx


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.6.6]
[13:51:24 02.12.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.9 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY DEMAGED! PHONE CANT AUTHORIZE SX4!

any solution !
i see u use old version of jau try with 2.7.2 and post log

i know that work with credits i have UB, MT, and other tools, but as far as i know there are pepole that claim , they unlock v300 with JAU. Phone is not destroied , after write pm backup all works ok. I see that all worked well on v300 with an older version of JAU

I have a 5800d with simlock fail , the product code is 0570203 , how can I know from which provider is?

I don't have any backup before get this problem
Here is the full pm backup but don't have pm120 :http://rapidshare.com/files/31536882...487494.pm.html
Please help me to solve this problem, I try sx4auth but get Superdongle error ... Please help me oOXTCOo ,

Best regards!

0570203: APAC2 BLUE SOUTH ASIA

hope this helps :)

and more here:

v31.0.101

0573784: APAC1 Black
0573784: APAC1 Black
0576528: APAC1 Black CAMBODIA
0576528: APAC1 Black CAMBODIA
0573786: APAC1 Black MALAYSIA
0573786: APAC1 Black MALAYSIA
0559950: APAC1 BLUE
0559950: APAC1 BLUE
0576527: APAC1 Blue CAMBODIA
0576527: APAC1 Blue CAMBODIA
0576527: APAC1 Blue CAMBODIA
0570197: APAC1 BLUE MALAYSIA
0570197: APAC1 BLUE MALAYSIA
0573794: APAC1 Indonesia Black
0573794: APAC1 Indonesia Black
0559960: APAC1 Indonesia BLUE
0559960: APAC1 Indonesia BLUE
0559670: APAC1 Indonesia RED
0559670: APAC1 Indonesia RED
0559476: APAC1 RED
0559476: APAC1 RED
0576530: APAC1 RED CAMBODIA
0576530: APAC1 RED CAMBODIA
0570196: APAC1 RED MALAYSIA
0570196: APAC1 RED MALAYSIA
0573787: APAC2 Black
0573859: APAC2 Black BANGLADESH
0573859: APAC2 Black BANGLADESH
0573860: APAC2 Black SOUTH ASIA
0573860: APAC2 Black SOUTH ASIA
0559953: APAC2 BLUE
0570200: APAC2 BLUE BANGALDESH
0570200: APAC2 BLUE BANGALDESH
0570203: APAC2 BLUE SOUTH ASIA
0570203: APAC2 BLUE SOUTH ASIA
0559548: APAC2 RED
0570201: APAC2 RED BANGLADESH
0570201: APAC2 RED BANGLADESH
0570204: APAC2 RED SOUTH ASIA
0570204: APAC2 RED SOUTH ASIA
0586818: Balkans
0573762: Balkans Black
0559395: Balkans BLUE
0559299: Balkans RED
0573744: Baltia Black
0559377: Baltia BLUE
0591247: Baltia Navi
0559233: Baltia RED
0573730: British Isles Black
0559346: British Isles BLUE
0586573: British Isles Navi
0552438: British Isles RED
0573747: CIS Black
0559388: CIS BLUE
0559276: CIS RED
0586817: Euro1-ALPS Navi
0588816: Euro1-France Navi
0573738: Euro1 ALPS Black
0559368: Euro1 ALPS BLUE
0559054: Euro1 ALPS RED
0573733: Euro1 Black
0573736: EURO1 Black Portugal
0559360: Euro1 BLUE
0570023: Euro1 BLUE Portugal
0573737: Euro1 France Black
0559366: Euro1 France BLUE
0559052: Euro1 France RED
0559051: Euro1 Hispania RED
0591246: EURO1 Portugal Navi
0558982: Euro1 RED
0570022: EURO1 RED Portugal
0587676: Euro2-Turkey Navi
0592281: EURO2
0573740: Euro2 Black
0573812: Euro2 Black Bene
0559372: Euro2 BLUE
0570027: Euro2 BLUE Bene
0586819: Euro2 Navi
0559066: Euro2 RED
0570026: Euro2 RED BENE
0573741: Euro2 Turkey Black
0559373: Euro2 Turkey BLUE
0559083: Euro2 Turkey RED
0593496: EURO3
0573761: Euro3 Black
0559394: Euro3 BLUE
0559298: Euro3 RED
0592516: HISPANIA
0573734: Hispania Black
0559363: Hispania BLUE
0586837: Israel
0573763: Israel Black
0559407: Israel BLUE
0559300: Israel RED
0573764: MENA_A BLACK
0573764: MENA_A BLACK
0559416: MENA_A BLUE
0559416: MENA_A BLUE
0575377: MENA_A EURO1 BLACK
0575377: MENA_A EURO1 BLACK
0575376: MENA_A EURO1BLUE
0575376: MENA_A EURO1BLUE
0575374: MENA_A EURO1RED
0575374: MENA_A EURO1RED
0559408: MENA_A RED
0559408: MENA_A RED
0573765: MENA_B BLACK
0573765: MENA_B BLACK
0574294: MENA_C BLACK
0574294: MENA_C BLACK
0574292: MENA_C BLUE
0574292: MENA_C BLUE
0574291: MENA_C RED
0574291: MENA_C RED
0574327: MENA_D BLACK
0574327: MENA_D BLACK
0574326: MENA_D BLUE
0574326: MENA_D BLUE
0574324: MENA_D RED
0574324: MENA_D RED
0574330: MENA_E BLACK
0574330: MENA_E BLACK
0574329: MENA_E BLUE
0574329: MENA_E BLUE
0575380: MENA_E EURO1 BLACK UAE
0575380: MENA_E EURO1 BLACK UAE
0575379: MENA_E EURO1BLUE UAE
0575379: MENA_E EURO1BLUE UAE
0574328: MENA_E RED
0574328: MENA_E RED
0573748: Moldova Black
0559389: Moldova BLUE
0559297: Moldova RED
0577445: RM-356 Brazil BLACK
0578212: RM-356 Brazil Red
0573745: Russia,Belarus Black
0559378: Russia,Belarus BLUE
0559237: Russia,Belarus RED
0592604: RUSSIAN
0573857: RUSSIAN Black HUNGARY
0573856: RUSSIAN Black ROMANIA
0570122: RUSSIAN BLUE HUNGARY
0570121: RUSSIAN BLUE ROMANIA
0591352: Russian Navi
0570123: RUSSIAN RED HUNGARY
0570120: RUSSIAN RED ROMANIA
0573743: Scandinavia Black
0559375: Scandinavia BLUE
0586838: Scandinavia Navi
0559110: Scandinavia RED
0573766: SSA_A BLACK
0573766: SSA_A BLACK
0559425: SSA_A BLUE
0559425: SSA_A BLUE
0559411: SSA_A RED
0559411: SSA_A RED
0573775: SSA_B BLACK
0573775: SSA_B BLACK
0559427: SSA_B BLUE
0559427: SSA_B BLUE
0559413: SSA_B RED
0559413: SSA_B RED
0577495: SSA_C BLACK
0577495: SSA_C BLACK
0577494: SSA_C BLUE
0577494: SSA_C BLUE
0577493: SSA_C RED
0577493: SSA_C RED
0573776: Taiwan Black
0559857: Taiwan BLUE
0559472: Taiwan RED
0573801: Thailand Black
0573801: Thailand Black
0573801: Thailand Black
0559963: Thailand BLUE
0559963: Thailand BLUE
0559678: Thailand RED
0559678: Thailand RED
0573746: Ukraine Black
0559383: Ukraine BLUE
0587677: Ukraine Navi
0559246: Ukraine RED
0573800: Vietnam Black
0573800: Vietnam Black
0559962: Vietnam BLUE
0559962: Vietnam BLUE
0559676: Vietnam RED
0559676: Vietnam RED


v31.0.008
0576907: 5800 NL CV R
0573784: APAC1 Black
0576528: APAC1 Black CAMBODIA
0573786: APAC1 Black MALAYSIA
0559950: APAC1 BLUE
0576527: APAC1 Blue CAMBODIA
0570197: APAC1 BLUE MALAYSIA
0573794: APAC1 Indonesia Black
0559960: APAC1 Indonesia BLUE
0559670: APAC1 Indonesia RED
0559476: APAC1 RED
0576530: APAC1 RED CAMBODIA
0570196: APAC1 RED MALAYSIA
0573787: APAC2 Black
0573859: APAC2 Black BANGLADESH
0573860: APAC2 Black SOUTH ASIA
0559953: APAC2 BLUE
0570200: APAC2 BLUE BANGALDESH
0570203: APAC2 BLUE SOUTH ASIA
0559548: APAC2 RED
0570201: APAC2 RED BANGLADESH
0570204: APAC2 RED SOUTH ASIA
0586818: Balkans
0573762: Balkans Black
0559395: Balkans BLUE
0559299: Balkans RED
0573744: Baltia Black
0559377: Baltia BLUE
0591247: Baltia Navi
0559233: Baltia RED
0573730: British Isles Black
0559346: British Isles BLUE
0586573: British Isles Navi
0552438: British Isles RED
0573747: CIS Black
0559388: CIS BLUE
0559276: CIS RED
0586817: Euro1-ALPS Navi
0588816: Euro1-France Navi
0573738: Euro1 ALPS Black
0559368: Euro1 ALPS BLUE
0559054: Euro1 ALPS RED
0573733: Euro1 Black
0573736: EURO1 Black Portugal
0559360: Euro1 BLUE
0570023: Euro1 BLUE Portugal
0573737: Euro1 France Black
0559366: Euro1 France BLUE
0559052: Euro1 France RED
0559051: Euro1 Hispania RED
0591246: EURO1 Portugal Navi
0558982: Euro1 RED
0570022: EURO1 RED Portugal
0587676: Euro2-Turkey Navi
0573740: Euro2 Black
0573812: Euro2 Black Bene
0559372: Euro2 BLUE
0570027: Euro2 BLUE Bene
0586819: Euro2 Navi
0559066: Euro2 RED
0570026: Euro2 RED BENE
0573741: Euro2 Turkey Black
0559373: Euro2 Turkey BLUE
0559083: Euro2 Turkey RED
0573761: Euro3 Black
0559394: Euro3 BLUE
0559298: Euro3 RED
0573734: Hispania Black
0559363: Hispania BLUE
0586837: Israel
0573763: Israel Black
0559407: Israel BLUE
0559300: Israel RED
0574292: MENA_C BLUE
0574291: MENA_C RED
0573748: Moldova Black
0559389: Moldova BLUE
0559297: Moldova RED
0577445: RM-356 Brazil BLACK
0578212: RM-356 Brazil Red
0573745: Russia,Belarus Black
0559378: Russia,Belarus BLUE
0559237: Russia,Belarus RED
0573857: RUSSIAN Black HUNGARY
0573856: RUSSIAN Black ROMANIA
0570122: RUSSIAN BLUE HUNGARY
0570121: RUSSIAN BLUE ROMANIA
0591352: Russian Navi
0570123: RUSSIAN RED HUNGARY
0570120: RUSSIAN RED ROMANIA
0573743: Scandinavia Black
0559375: Scandinavia BLUE
0586838: Scandinavia Navi
0559110: Scandinavia RED
0573776: Taiwan Black
0559857: Taiwan BLUE
0559472: Taiwan RED
0573801: Thailand Black
0559963: Thailand BLUE
0559678: Thailand RED
0573746: Ukraine Black
0559383: Ukraine BLUE
0587677: Ukraine Navi
0559246: Ukraine RED
0573800: Vietnam Black
0559962: Vietnam BLUE
0559676: Vietnam RED

v30
0577102: 5800 Belgium BE CV R v1
0591106: 5800 H3G UK R
0575586: 5800 India CV B v1
0575590: 5800 India CV R v1
0584136: 5800 Mobilkom AT R
0584537: 5800 Mobilkom Red Bull BK
0590300: 5800 mtel Bosnia Herzegovina BA R
0580123: 5800 NetComm No R
0576907: 5800 NL CV R
0581915: 5800 NL CV NL BK
0580640: 5800 NLCV BLUE v1_COLOR
0581424: 5800 Orange SK GV R V2
0590526: 5800 Play Mobile PL R
0583176: 5800 RM-356 Belgium BE CV BK
0580117: 5800 RM-356 Belgium BECV B
0578174: 5800 RM-356 France CV R
0578314: 5800 RM-356 Germany CV B
0578313: 5800 RM-356 Germany CV R
0578404: 5800 RM-356 Norway CV B_COLOR
0578315: 5800 RM-356 Norway CV R
0583679: 5800 RM-356 Polkomtel SA PL B
0583664: 5800 RM-356 Polkomtel SA PL R
0580574: 5800 RM-356 Polska Telefonia Cyfrowa Era PL - MR
0577181: 5800 RM-356 T-Mobile Austria AT Red (LITE)
0583680: 5800 RM-356 Telenor Mobil NO NO Blue
0587326: 5800 Switzerland CH CV CwM BK
0575887: 5800 Switzerland CV CH R
0576059: 5800 Switzerland CV CHB
0579271: 5800 Tele2 NO R
0579278: 5800 Telenor Mobil NO R
0579270: 5800 Turkey CV B
0579269: 5800 Turkey CV R
0581654: 5800 VF DE R
0579976: 5800 VF Proximus B
0587014: 5800 VF Proximus BK
0578577: 5800 VF Proximus R
0573784: APAC1 Black
0576528: APAC1 Black CAMBODIA
0573786: APAC1 Black MALAYSIA
0559950: APAC1 BLUE
0576527: APAC1 Blue CAMBODIA
0570197: APAC1 BLUE MALAYSIA
0573794: APAC1 Indonesia Black
0559960: APAC1 Indonesia BLUE
0559670: APAC1 Indonesia RED
0559476: APAC1 RED
0576530: APAC1 RED CAMBODIA
0570196: APAC1 RED MALAYSIA
0573788: APAC2 AU Black
0559958: APAC2 AU BLUE
0559668: APAC2 AU RED
0573787: APAC2 Black
0573859: APAC2 Black BANGLADESH
0573860: APAC2 Black SOUTH ASIA
0559953: APAC2 BLUE
0570200: APAC2 BLUE BANGALDESH
0570203: APAC2 BLUE SOUTH ASIA
0573797: APAC2 India Black
0559961: APAC2 India BLUE
0559673: APAC2 India RED
0573791: APAC2 NZ Black
0559959: APAC2 NZ BLUE
0559669: APAC2 NZ RED
0559548: APAC2 RED
0570201: APAC2 RED BANGLADESH
0570204: APAC2 RED SOUTH ASIA
0573762: Balkans Black
0559395: Balkans BLUE
0559299: Balkans RED
0573744: Baltia Black
0559377: Baltia BLUE
0559233: Baltia RED
0573730: British Isles Black
0559346: British Isles BLUE
0552438: British Isles RED
0573747: CIS Black
0559388: CIS BLUE
0559276: CIS RED
0573738: Euro1 ALPS Black
0559368: Euro1 ALPS BLUE
0559054: Euro1 ALPS RED
0573733: Euro1 Black
0573736: EURO1 Black Portugal
0559360: Euro1 BLUE
0570023: Euro1 BLUE Portugal
0573737: Euro1 France Black
0559366: Euro1 France BLUE
0559052: Euro1 France RED
0559051: Euro1 Hispania RED
0558982: Euro1 RED
0570022: EURO1 RED Portugal
0573740: Euro2 Black
0573812: Euro2 Black Bene
0559372: Euro2 BLUE
0570027: Euro2 BLUE Bene
0559066: Euro2 RED
0570026: Euro2 RED BENE
0573741: Euro2 Turkey Black
0559373: Euro2 Turkey BLUE
0559083: Euro2 Turkey RED
0573761: Euro3 Black
0559394: Euro3 BLUE
0559298: Euro3 RED
0573734: Hispania Black
0559363: Hispania BLUE
0573780: Hong Kong Black
0559931: Hong Kong BLUE
0559473: Hong Kong RED
0573763: Israel Black
0559407: Israel BLUE
0559300: Israel RED
0573764: MENA_A BLACK
0559416: MENA_A BLUE
0575377: MENA_A EURO1 BLACK
0575376: MENA_A EURO1BLUE
0575374: MENA_A EURO1RED
0559408: MENA_A RED
0573765: MENA_B BLACK
0559423: MENA_B BLUE
0559410: MENA_B RED
0574294: MENA_C BLACK
0574292: MENA_C BLUE
0574291: MENA_C RED
0574327: MENA_D BLACK
0574326: MENA_D BLUE
0574324: MENA_D RED
0574330: MENA_E BLACK
0574329: MENA_E BLUE
0575380: MENA_E EURO1 BLACK UAE
0575379: MENA_E EURO1BLUE UAE
0575378: MENA_E EURO1RED UAE
0574328: MENA_E RED
0573748: Moldova Black
0559389: Moldova BLUE
0559297: Moldova RED
0577445: RM-356 Brazil BLACK
0578212: RM-356 Brazil Red
0580573: RM-356 Polska Telefonia Cyfrowa Era PL - MR
0573745: Russia,Belarus Black
0559378: Russia,Belarus BLUE
0559237: Russia,Belarus RED
0573857: RUSSIAN Black HUNGARY
0573856: RUSSIAN Black ROMANIA
0570122: RUSSIAN BLUE HUNGARY
0570121: RUSSIAN BLUE ROMANIA
0570123: RUSSIAN RED HUNGARY
0570120: RUSSIAN RED ROMANIA
0573743: Scandinavia Black
0559375: Scandinavia BLUE
0559110: Scandinavia RED
0573766: SSA_A BLACK
0559425: SSA_A BLUE
0559411: SSA_A RED
0573775: SSA_B BLACK
0559427: SSA_B BLUE
0559413: SSA_B RED
0577495: SSA_C BLACK
0577494: SSA_C BLUE
0577493: SSA_C RED
0573776: Taiwan Black
0559857: Taiwan BLUE
0559472: Taiwan RED
0573801: Thailand Black
0559963: Thailand BLUE
0559678: Thailand RED
0573746: Ukraine Black
0559383: Ukraine BLUE
0559246: Ukraine RED
0573800: Vietnam Black
0559962: Vietnam BLUE
0559676: Vietnam RED


v21
0580460: 5800 Bouygues Telecom FR Socle V3
0577188: 5800 Pannon Hungary HU B
0576933: 5800 Bangladesh CV B
0576930: 5800 Bangladesh CV BK
0576972: 5800 Bangladesh CV R
0577102: 5800 Belgium BE CV R v1
0588054: 5800 BHTelecom BA BK
0575654: 5800 Bouygues Telecom FR V1 R
0587482: 5800 Carphone UK R
0581500: 5800 Centertel (Orange PL) GV color_B
0581497: 5800 Centertel (Orange PL) GV color_BK
0581496: 5800 Centertel (Orange PL) GV R
0580705: 5800 Centertel (Orange PL) Light BK
0576922: 5800 Centertel (Orange PL) Light R
0575632: 5800 Croatia CV R v2
0580331: 5800 CZ CV BK
0580246: 5800 CZ CV R
0578228: 5800 DK CV B
0586698: 5800 DK CV BK
0578227: 5800 DK CV R
0585883: 5800 DNA FI BK
0584466: 5800 Globe PH B V1
0581336: 5800 H3G AU B
0582945: 5800 H3G AU BK
0580775: 5800 H3G DK B
0578723: 5800 H3G IT B
0577093: 5800 H3G IT R
0580774: 5800 H3G SE R
0575408: 5800 HK CV B V3
0581337: 5800 HK CV BK V3
0575407: 5800 HK CV R V3
0575586: 5800 India CV B v1
0575590: 5800 India CV R v1
0574676: 5800 Indonesia ID CV R v2
0574682: 5800 Indonesia IDCV B v2
0583805: 5800 Indonesia IDCV BK
0584136: 5800 Mobilkom R
0584537: 5800 Mobilkom Red Bull BK
0574569: 5800 Movistar Spain ES B V2
0575956: 5800 Movistar Spain ES R V2
0583430: 5800 MTEL R
0580123: 5800 NetComm No R
0576907: 5800 Netherlands NL CV R
0581915: 5800 Netherlands NL CV NL BK
0587522: 5800 O2 UK Prepay R
0587465: 5800 Optus AU B NonCwM
0579275: 5800 Optus AU B V2
0578963: 5800 Orange CH GV R
0582512: 5800 Orange ES GV R
0577544: 5800 Orange France GV B
0582514: 5800 Orange RO GV R
0581424: 5800 Orange SK GV R
0576022: 5800 Orange Spain Light R
0581300: 5800 Orange UK BK Light
0586591: 5800 Orange UK BK Light with co-labels
0576921: 5800 Orange UK R Light
0578306: 5800 Philippines CV B V1_COLOR
0583152: 5800 Philippines CV BK V1
0578218: 5800 Philippines CV R
0590526: 5800 Play Mobile PL R
0583176: 5800 RM-356 Belgium BE CV BK
0580117: 5800 RM-356 Belgium BECV B
0577324: 5800 RM-356 Croatia HR CV B v2
0582237: 5800 RM-356 Croatia HR CV BK
0576609: 5800 RM-356 CZB CV
0581922: 5800 RM-356 DE CV CwM - BK
0588454: 5800 RM-356 Fastweb SpA IT Red Unlock
0576387: 5800 RM-356 FI CV B 25 TRACKS V1_COLOR
0576387: 5800 RM-356 FI CV B 25 TRACKS V1_COLOR
0580456: 5800 RM-356 FI CV BK 25 TRACKS V1_COLOR
0580456: 5800 RM-356 FI CV BK 25 TRACKS V1_COLOR
0576385: 5800 RM-356 FI CV R 25 TRACKS V1
0578174: 5800 RM-356 France CV R
0578314: 5800 RM-356 Germany CV B
0578313: 5800 RM-356 Germany CV R
0581917: 5800 RM-356 KPN NL R
0582872: 5800 RM-356 Meteor Mobile IE R
0588660: 5800 RM-356 Middle-East_North Africa AE Ramadan Algeria Blue v1
0588739: 5800 RM-356 Middle-East_North Africa AE Ramadan Arabic Blk Silver v1
0588616: 5800 RM-356 Middle-East_North Africa AE Ramadan Arabic Blue v1
0588665: 5800 RM-356 Middle-East_North Africa AE Ramadan Arabic EU BLK Silv v1
0588652: 5800 RM-356 Middle-East_North Africa AE Ramadan Arabic EU Blue v1
0588668: 5800 RM-356 Middle-East_North Africa AE Ramadan Arabic Nav Red v1
0588645: 5800 RM-356 Middle-East_North Africa AE Ramadan Arabic Red v1
0588649: 5800 RM-356 Middle-East_North Africa AE Ramadan KSA Black Silver v1
0588664: 5800 RM-356 Middle-East_North Africa AE Ramadan KSA Blue v1
0588667: 5800 RM-356 Middle-East_North Africa AE Ramadan KSA Red v1
0588671: 5800 RM-356 Middle-East_North Africa AE Ramadan N.Africa Blue v1
0588738: 5800 RM-356 Middle-East_North Africa AE Ramadan N.Africa Red v1
0588681: 5800 RM-356 Middle-East_North Africa AE Ramadan Pakistan Blue v1
0588683: 5800 RM-356 Middle-East_North Africa AE Ramadan Pakistan Red v1
0588680: 5800 RM-356 Middle-East_North Africa AE Ramadan UAE Blk Slv v1
0588676: 5800 RM-356 Middle-East_North Africa AE Ramadan UAE Blue v1
0589083: 5800 RM-356 Middle-East_North Africa AE Ramadan UAE Red v1
0588086: 5800 RM-356 Middle-East_North Africa AE Ramadan Algeria Red v1
0580640: 5800 RM-356 NLCV BLUE v1_COLOR
0578404: 5800 RM-356 Norway CV B_COLOR
0578315: 5800 RM-356 Norway CV R
0577080: 5800 RM-356 O2 DE B
0579683: 5800 RM-356 O2 Ireland IE BK V1
0576524: 5800 RM-356 O2 UK R
0577252: 5800 RM-356 Partner IL B
0580852: 5800 RM-356 Partner IL R v2
0583679: 5800 RM-356 Polkomtel SA PL B
0583664: 5800 RM-356 Polkomtel SA PL R
0580574: 5800 RM-356 Polska Telefonia Cyfrowa Era PL (blue)_COLOR
0580573: 5800 RM-356 Polska Telefonia Cyfrowa Era PL (red)
0575028: 5800 RM-356 Russia RU CV B
0581770: 5800 RM-356 Russia RU CV Games B
0581769: 5800 RM-356 Russia RU CV Games R
0574888: 5800 RM-356 Russia RU CV R
0581776: 5800 RM-356 Russia RU CV WH700 Bundle B
0581777: 5800 RM-356 Russia RU CV WH700 Bundle BK
0581772: 5800 RM-356 Russia RU CV WH700 Bundle R
0582379: 5800 RM-356 Slovenia SI CV BK
0581838: 5800 RM-356 Slovenia SI CV R
0578087: 5800 RM-356 Sweden CV B_COLOR
0582162: 5800 RM-356 Sweden CV CWM BK
0578086: 5800 RM-356 Sweden CV R
0581689: 5800 RM-356 T-Mobile Austria AT black
0577181: 5800 RM-356 T-Mobile Austria AT Red (LITE)
0584583: 5800 RM-356 T-Mobile Austria AT red_COLOR
0577186: 5800 RM-356 T-Mobile Germany DE Red - V1
0577176: 5800 RM-356 T-Mobile Hungary HU BLUE V2
0577479: 5800 RM-356 T-Mobile NL NL RED 25 tr + guitarrock V2
0588866: 5800 RM-356 T-Mobile NL NL Tiesto edition RED
0577187: 5800 RM-356 T-Mobile UK GB V2 (Red)
0583680: 5800 RM-356 Telenor Mobil NO NO Blue
0587080: 5800 RM-356 TIM IT IT Blue Full Variant
0577120: 5800 RM-356 TIM IT IT Red V3 Full Variant
0581836: 5800 RM-356 TMN PT B V2
0581127: 5800 RM-356 Wind IT B V2
0585159: 5800 RM-356 Wind IT BK V1
0582194: 5800 RM-356 Wind IT R V2
0577300: 5800 Romania RO CV (GTR) B
0577300: 5800 Romania RO CV (GTR) B V2
0577251: 5800 Romania RO CV (GTR) R
0577251: 5800 Romania RO CV (GTR) R V2
0581682: 5800 Singapore CV B (CwM) V1
0581678: 5800 Singapore CV BK (CwM) V1
0581681: 5800 Singapore CV R (CwM) V1
0582380: 5800 Slovenia SI CV B
0582555: 5800 Smart PH BK V2
0586634: 5800 Sonofon DK B
0586635: 5800 Sonofon DK BK
0577367: 5800 Sonofon DK R
0575953: 5800 South Africa CV B V1_COLOR
0575950: 5800 South Africa CV R V1
0575384: 5800 Spain ES CV B
0575570: 5800 Spain ES CV R
0587326: 5800 Switzerland CH CV CwM BK
0575887: 5800 Switzerland CV CH R
0576059: 5800 Switzerland CV CHB
0588040: 5800 Syrian Arab Republic SY CV Non GPS v1.0 BK
0580121: 5800 Syrian Arab Republic SY CV Non GPS v1.0 R
0575387: 5800 Taiwan CV B V2
0575392: 5800 Taiwan CV R V2
0586696: 5800 TDC DK B
0586647: 5800 TDC DK BK
0577482: 5800 TDC DK R
0579271: 5800 Tele2 NO R
0586635: 5800 Telenor DK BK V2
0579278: 5800 Telenor Mobil NO R
0577196: 5800 Telenor SE R v2
0577229: 5800 Telenor Serbia RS B
0581913: 5800 Telenor Serbia RS BK
0586653: 5800 Telia DK B
0586697: 5800 Telia DK BK
0577323: 5800 Telia DK R
0587988: 5800 TeliaSonera FI B
0585900: 5800 TeliaSonera FI R V2
0580216: 5800 TeliaSonera SE R
0579270: 5800 Turkey CV B
0579269: 5800 Turkey CV R
0582855: 5800 TWCV BK V2
0581911: 5800 UK CV BK
0579934: 5800 UK CV B
0575581: 5800 UK CV R
0586365: 5800 Ukraine CV B
0587207: 5800 Ukraine CV BH103 B
0587204: 5800 Ukraine CV BH103 BK
0587151: 5800 Ukraine CV BH103 R
0589234: 5800 Ukraine CV BK
0586361: 5800 Ukraine CV R
0587022: 5800 VF AU BK
0581654: 5800 VF DE R
0576050: 5800 VF ES R
0576050: 5800 VF ES R V3
0582903: 5800 VF GR B
0582886: 5800 VF HU FULL R
0577072: 5800 VF HU R
0579092: 5800 VF IE R
0576053: 5800 VF IT R
0577458: 5800 VF NL R
0581905: 5800 VF NZ R
0579976: 5800 VF Proximus B
0587014: 5800 VF Proximus BK
0578577: 5800 VF Proximus R
0576051: 5800 VF PT R V2
0576051: 5800 VF PT R V3
0581633: 5800 VF RO FULL R
0577189: 5800 VF RO R
0579282: 5800 VF Simobil R
0580898: 5800 VF Swisscom BK
0587461: 5800 VF Swisscom CwM BK
0576047: 5800 VF Swisscom R
0577089: 5800 VF UK B
0585029: 5800 VF UK G_S B
0587678: 5800 VF UK PAYG B
0579279: 5800 VF Vipnet BK
0587463: 5800 Virgin AU R NonCwM
0579273: 5800 Virgin AU R V2
0579272: 5800 Virgin UK R V2
0576714: 5800 Vodacom R
0580230: 5800 Yoigo Es R
0573784: APAC1 Black
0576528: APAC1 Black CAMBODIA
0573786: APAC1 Black MALAYSIA
0559950: APAC1 BLUE
0576527: APAC1 Blue CAMBODIA
0570197: APAC1 BLUE MALAYSIA
0573794: APAC1 Indonesia Black
0559960: APAC1 Indonesia BLUE
0559670: APAC1 Indonesia RED
0559476: APAC1 RED
0576530: APAC1 RED CAMBODIA
0570196: APAC1 RED MALAYSIA
0573788: APAC2 AU Black
0559958: APAC2 AU BLUE
0559668: APAC2 AU RED
0573787: APAC2 Black
0573859: APAC2 Black BANGLADESH
0573860: APAC2 Black SOUTH ASIA
0559953: APAC2 BLUE
0570200: APAC2 BLUE BANGALDESH
0570203: APAC2 BLUE SOUTH ASIA
0573797: APAC2 India Black
0559961: APAC2 India BLUE
0559673: APAC2 India RED
0573791: APAC2 NZ Black
0559959: APAC2 NZ BLUE
0559669: APAC2 NZ RED
0559548: APAC2 RED
0570201: APAC2 RED BANGLADESH
0570204: APAC2 RED SOUTH ASIA
0573762: Balkans Black
0559395: Balkans BLUE
0559299: Balkans RED
0573744: Baltia Black
0559377: Baltia BLUE
0559233: Baltia RED
0573730: British Isles Black
0559346: British Isles BLUE
0552438: British Isles RED
0573747: CIS Black
0559388: CIS BLUE
0559276: CIS RED
0573738: Euro1 ALPS Black
0559368: Euro1 ALPS BLUE
0559054: Euro1 ALPS RED
0573733: Euro1 Black
0573736: EURO1 Black Portugal
0559360: Euro1 BLUE
0570023: Euro1 BLUE Portugal
0573737: Euro1 France Black
0559366: Euro1 France BLUE
0559052: Euro1 France RED
0559051: Euro1 Hispania RED
0558982: Euro1 RED
0570022: EURO1 RED Portugal
0573740: Euro2 Black
0573812: Euro2 Black Bene
0559372: Euro2 BLUE
0570027: Euro2 BLUE Bene
0559066: Euro2 RED
0570026: Euro2 RED BENE
0573741: Euro2 Turkey Black
0559373: Euro2 Turkey BLUE
0559083: Euro2 Turkey RED
0573761: Euro3 Black
0559394: Euro3 BLUE
0559298: Euro3 RED
0573734: Hispania Black
0559363: Hispania BLUE
0573763: Israel Black
0559407: Israel BLUE
0559300: Israel RED
0573764: MENA_A BLACK
0559416: MENA_A BLUE
0575377: MENA_A EURO1 BLACK
0575376: MENA_A EURO1BLUE
0575374: MENA_A EURO1RED
0559408: MENA_A RED
0573765: MENA_B BLACK
0559423: MENA_B BLUE
0574294: MENA_C BLACK
0574292: MENA_C BLUE
0574291: MENA_C RED
0574327: MENA_D BLACK
0574326: MENA_D BLUE
0574324: MENA_D RED
0574330: MENA_E BLACK
0574329: MENA_E BLUE
0575380: MENA_E EURO1 BLACK UAE
0575379: MENA_E EURO1BLUE UAE
0575378: MENA_E EURO1RED UAE
0574328: MENA_E RED
0573748: Moldova Black
0559389: Moldova BLUE
0559297: Moldova RED
0577445: RM-356 Brazil BLACK
0578212: RM-356 Brazil Red
0573745: Russia,Belarus Black
0559378: Russia,Belarus BLUE
0559237: Russia,Belarus RED
0573857: RUSSIAN Black HUNGARY
0573856: RUSSIAN Black ROMANIA
0570122: RUSSIAN BLUE HUNGARY
0570121: RUSSIAN BLUE ROMANIA
0570123: RUSSIAN RED HUNGARY
0570120: RUSSIAN RED ROMANIA
0573743: Scandinavia Black
0559375: Scandinavia BLUE
0559110: Scandinavia RED
0573766: SSA_A BLACK
0559425: SSA_A BLUE
0559411: SSA_A RED
0573775: SSA_B BLACK
0559427: SSA_B BLUE
0559413: SSA_B RED
0577495: SSA_C BLACK
0577494: SSA_C BLUE
0577493: SSA_C RED
0573746: Ukraine Black
0559383: Ukraine BLUE
0559246: Ukraine RED
0573800: Vietnam Black
0559962: Vietnam BLUE
0559676: Vietnam RED
0576603: 5800 RM-356 TMN PT R
0576050: 5800 VF ES R
0576051: 5800 VF PT R
0576714: 5800 Vodacom R
0577229: 5800 Telenor Serbia RS B
0576053: 5800 VF IT R
0577188: 5800 Pannon Hungary HU B
0575632: 5800 Croatia CV R
0576900: 5800 Optimus PT V1 R
0577324: 5800 RM-356 Croatia HR B CV CU_COLOR
0578086: 5800 RM-356 Sweden CV R
0577176: 5800 RM-356 T-Mobile Hungary HU BLUE
0575887: 5800 Switzerland CV CH R
0576047: 5800 VF Swisscom R
0577482: 5800 TDC DK R
0577323: 5800 Telia DK R
0578563: 5800 H3G HK B (Light)
0576733: 5800 H3G HK R (Light)
0579934: 5800 UK CV B
0575581: 5800 UK CV R v2
0579683: 5800 RM-356 O2 Ireland IE BK V1
0576524: 5800 RM-356 O2 UK R
0577120: 5800 TIM IT R
0579934: 5800 UK CV B
0575581: 5800 UK CV R v2
0577089: 5800 VF UK B
0575408: 5800 HK CV B
0575407: 5800 HK CV R
0581337: 5800 HK CV BK
0559395: Balkans BLUE
0559299: Balkans RED
0559377: Baltia BLUE
0559233: Baltia RED
0559346: British Isles BLUE
0552438: British Isles RED
0559388: CIS BLUE
0559276: CIS RED
0559368: Euro1 ALPS BLUE
0559054: Euro1 ALPS RED
0559360: Euro1 BLUE
0570023: Euro1 BLUE Portugal
0559366: Euro1 France BLUE
0559052: Euro1 France RED
0559051: Euro1 Hispania RED
0558982: Euro1 RED
0570022: EURO1 RED Portugal
0559372: Euro2 BLUE
0570027: Euro2 BLUE Bene
0559066: Euro2 RED
0570026: Euro2 RED BENE
0559373: Euro2 Turkey BLUE
0559083: Euro2 Turkey RED
0559394: Euro3 BLUE
0559298: Euro3 RED
0559363: Hispania BLUE
0559407: Israel BLUE
0559300: Israel RED
0559389: Moldova BLUE
0559297: Moldova RED
0559378: Russia,Belarus BLUE
0559237: Russia,Belarus RED
0570122: RUSSIAN BLUE HUNGARY
0570121: RUSSIAN BLUE ROMANIA
0570123: RUSSIAN RED HUNGARY
0570120: RUSSIAN RED ROMANIA
0559375: Scandinavia BLUE
0559110: Scandinavia RED
0559383: Ukraine BLUE
0559246: Ukraine RED
0559950: APAC1 BLUE
0576527: APAC1 Blue CAMBODIA
0559960: APAC1 Indonesia BLUE
0559670: APAC1 Indonesia RED
0559476: APAC1 RED
0576530: APAC1 RED CAMBODIA
0559958: APAC2 AU BLUE
0559668: APAC2 AU RED
0559857: Taiwan BLUE
0559472: Taiwan RED
0559963: Thailand BLUE
0559678: Thailand RED
0559416: MENA_A BLUE
0575376: MENA_A EURO1BLUE
0575374: MENA_A EURO1RED
0559408: MENA_A RED
0559423: MENA_B BLUE
0559410: MENA_B RED
0574326: MENA_D BLUE
0574324: MENA_D RED
0574329: MENA_E BLUE
0575379: MENA_E EURO1BLUE UAE
0575378: MENA_E EURO1RED UAE
0574328: MENA_E RED
0559425: SSA_A BLUE
0559411: SSA_A RED
0559427: SSA_B BLUE
0559413: SSA_B RED
0577494: SSA_C BLUE
0577493: SSA_C RED


Still v10

0576603: 5800 RM-356 TMN PT R
0576050: 5800 VF ES R
0576051: 5800 VF PT R
0576714: 5800 Vodacom R
0577229: 5800 Telenor Serbia RS B
0576053: 5800 VF IT R
0577188: 5800 Pannon Hungary HU B
0575632: 5800 Croatia CV R
0576900: 5800 Optimus PT V1 R
0577324: 5800 RM-356 Croatia HR B CV CU_COLOR
0578086: 5800 RM-356 Sweden CV R
0577176: 5800 RM-356 T-Mobile Hungary HU BLUE
0575887: 5800 Switzerland CV CH R
0576047: 5800 VF Swisscom R
0577482: 5800 TDC DK R
0577323: 5800 Telia DK R
0578563: 5800 H3G HK B (Light)
0576733: 5800 H3G HK R (Light)

Still v11

0579934: 5800 UK CV B
0575581: 5800 UK CV R v2
0579683: 5800 RM-356 O2 Ireland IE BK V1
0576524: 5800 RM-356 O2 UK R
0577120: 5800 TIM IT R
0579934: 5800 UK CV B
0575581: 5800 UK CV R v2
0577089: 5800 VF UK B
0575408: 5800 HK CV B
0575407: 5800 HK CV R
0581337: 5800 HK CV BK

how to fix this Reading...
SW Version : V 05.60
14-09-07
RM-145
(c) Nokia
IMEI Plain : 35482702xxxxxxxx


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.2]
[22:38:05 02.12.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.9 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY - DEMAGED! PHONE CAN´T AUTHORIZE SX4!

i used last version V272. After unlock ST-sec fail



u need to unlock it and after unlock again write the created unlocked pm file to phone...

see my videos, i have unlocked more then 15 e71 v300.21.012 firmwares withouth any problem after.


but if you still have this problem iam interessted to buy this phone from you to check by my self.


or we can try remotly some thinks...

for this i need to original backup of 308 and the created unlocked...
maybe it have something to do with last update, but i dont think so.

@all other, i will answer questions some days later, i have a flu :(



br.
hari

u need to unlock it and after unlock again write the created unlocked pm file to phone...

see my videos, i have unlocked more then 15 e71 v300.21.012 firmwares withouth any problem after.


but if you still have this problem iam interessted to buy this phone from you to check by my self.


or we can try remotly some thinks...

for this i need to original backup of 308 and the created unlocked...
maybe it have something to do with last update, but i dont think so.

@all other, i will answer questions some days later, i have a flu :(



br.
hari


oh man, ... Hope its not a SWINE FLU as its a very popular rapidly spreading flu around the Europe ...

Wish you a good health (including some garlic, onions, hot tea's and some vodka or something strong to give a good reboot for your immunity system )

BR

oh man, ... Hope its not a SWINE FLU as its a very popular rapidly spreading flu around the Europe ...

Wish you a good health (including some garlic, onions, hot tea's and some vodka or something strong to give a good reboot for your immunity system )

BR

thank you.

no its normal flu...
my wife and my sohn had 3 flu´s in 3 month my staff aleks had it since some days and again my wife and my sohn... now i have it too...
my immunity cant figth with so mutch flu´s in this short time ;)
but my last flu i cant remeber when i had it...

my wife say to me, i cant get any flu cause i dont work, i sit only in my office on my pc and do nothing.... i think she dont know what she speech... maybe she have to high fever :D

Here are backups from 2 unit

I have a 5800d with simlock fail , the product code is 0570203 , how can I know from which provider is?

I don't have any backup before get this problem
Here is the full pm backup but don't have pm120 :http://rapidshare.com/files/31536882...487494.pm.html
Please help me to solve this problem, I try sx4auth but get Superdongle error ... Please help me oOXTCOo ,

Best regards!
write this rpl for the simlock
http://rapidshare.com/files/315476636/RM-356_354182026487494.RPL

but to solve the superdongle you must follow this procedure and flash back to the original version

http://forum.gsmhosting.com/vbb/showpost.php?p=4865306&postcount=44

BR

Alex

i sit only in my office on my pc and do nothing.... i think she dont know what she speech... maybe she have to high fever :D
Same here,, my wife say same things. And not have fui:D

hey hari

unlock for rm-320 not work says unlocked but phone turns off after nokia logo

well done otherwise though maybe fix for this?

Connecting to phone.......

Reading...
SW Version : V 06wk41v64.1
26-09-08
RM-320
(c) Nokia
IMEI Plain : 359542018918779
Reading Backups..
Field: 120, Subblock: 0, Bytes: 216 -> OK
Done! in Time: 12:00:00 a.m.
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 12:00:00 a.m.
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 12:00:00 a.m.
Field: 120, Subblock: 3, Bytes: 112 -> OK
Skip saving, Backups allready exists!
Done! in Time: 12:00:00 a.m.
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Skip saving, Backups allready exists!
Done! in Time: 12:00:04 a.m.
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 5050600042465540
PROVIDER : Hutchinson 3G;Australia
Blocks : 06
Key Code count: 0, F-Bus Code count: 0

Switch JAF to Flashmode...
FLASHMODE: OK!

APE Boot Data :
Asic ID : 24200705
Asic Mode ID : 00
Asic Public ID : E5F110C99A492783CC9FF2FB22C4D4FD4C90E26F
HASH : BA8710A7E1CD5A2909B9A875DB27AA24
ROM ID : 00000000011500

CMT Boot Data :
Asic ID : 000000010000022600010006400C192101031103
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 21E0001456710052970E33C97CFA66762AA7AE83
HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID : 4B9B75103E691FF8
CMT 1st Boot : OK!

HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
0x550200C03AFA00
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x134 sent: OK!
Phone ack: 0x5502
Sending Simlock Cert. (0x0190)
Phone ack: 0x5502
SL Cert. Sent: OK!
Sending Rap Certificate 21 v1.0 (0x1931)
Phone ack: 0x5502
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
De-Crypt SL-Buffer...
SL buffer De-Crypted: OK!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Connecting to phone......

Reading...
SW Version : V 06wk41v64.1
26-09-08
RM-320
(c) Nokia
IMEI Plain : 359542018918779
UNLOCKING...
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Field: 120, Subblock: 0, Bytes: 56 -> OK
Done! Time: 12:00:01 a.m.
Connecting to phone.........

Reading...
SW Version : V 06wk41v64.1
26-09-08
RM-320
(c) Nokia
IMEI Plain : 359542018918779


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN

Done!
All Done!

can i rapier SUPERDONGLE KEY - DEMAGED with jau plz tell me.

Thanks bro its might be a good locker. But i am not tested. 7210c, 5130 are also cs removed & unlocked ? Anybody tested ? Reply me.

hey hari

unlock for rm-320 not work says unlocked but phone turns off after nokia logo

well done otherwise though maybe fix for this?

Connecting to phone.......

Reading...
SW Version : V 06wk41v64.1
26-09-08
RM-320
(c) Nokia
IMEI Plain : 359542018918779
Reading Backups..
Field: 120, Subblock: 0, Bytes: 216 -> OK
Done! in Time: 12:00:00 a.m.
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 12:00:00 a.m.
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 12:00:00 a.m.
Field: 120, Subblock: 3, Bytes: 112 -> OK
Skip saving, Backups allready exists!
Done! in Time: 12:00:00 a.m.
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Skip saving, Backups allready exists!
Done! in Time: 12:00:04 a.m.
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 5050600042465540
PROVIDER : Hutchinson 3G;Australia
Blocks : 06
Key Code count: 0, F-Bus Code count: 0

Switch JAF to Flashmode...
FLASHMODE: OK!

APE Boot Data :
Asic ID : 24200705
Asic Mode ID : 00
Asic Public ID : E5F110C99A492783CC9FF2FB22C4D4FD4C90E26F
HASH : BA8710A7E1CD5A2909B9A875DB27AA24
ROM ID : 00000000011500

CMT Boot Data :
Asic ID : 000000010000022600010006400C192101031103
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 21E0001456710052970E33C97CFA66762AA7AE83
HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID : 4B9B75103E691FF8
CMT 1st Boot : OK!

HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
0x550200C03AFA00
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x134 sent: OK!
Phone ack: 0x5502
Sending Simlock Cert. (0x0190)
Phone ack: 0x5502
SL Cert. Sent: OK!
Sending Rap Certificate 21 v1.0 (0x1931)
Phone ack: 0x5502
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
De-Crypt SL-Buffer...
SL buffer De-Crypted: OK!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Connecting to phone......

Reading...
SW Version : V 06wk41v64.1
26-09-08
RM-320
(c) Nokia
IMEI Plain : 359542018918779
UNLOCKING...
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Field: 120, Subblock: 0, Bytes: 56 -> OK
Done! Time: 12:00:01 a.m.
Connecting to phone.........

Reading...
SW Version : V 06wk41v64.1
26-09-08
RM-320
(c) Nokia
IMEI Plain : 359542018918779


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN

Done!
All Done!


i will try to get this phones for testing by me self, maybe i did some misstake in last update.
i will check it and give update after fix...

but i will need some days...

Here are backups from 2 unit


please try this created unlocked pm´s, maybe this is the solution.
if it works, i make update instand.
if not, i need to search more...

please tell me if all okay after writing this, but before you write this files make phone back to original state.

write this rpl for the simlock
http://rapidshare.com/files/315476636/RM-356_354182026487494.RPL

but to solve the superdongle you must follow this procedure and flash back to the original version

http://forum.gsmhosting.com/vbb/showpost.php?p=4865306&postcount=44

BR

Alex

Thanks mateeeeeeeeeeeee!!! Now phone power on normaly , and ALL OK!!
can you share with me wich program do you use to create rpl , and wich steps do you use , Thanks in advance!!!

Hi Hari and Alex !!!
Let's Suppose i have Full pm backup Of n95 8Gb.
How to create simlock RPL by using J.A.U?

Still don`t works, Phone stut`s down afetr power up.
but if i read on cable it shows that is unlocked.

I can read and try more pieces( i have 7 pieces with this version)

i tried a new unit

here are pm`s

i know that work with credits i have UB, MT, and other tools, but as far as i know there are pepole that claim , they unlock v300 with JAU. Phone is not destroied , after write pm backup all works ok. I see that all worked well on v300 with an older version of JAU

Hello tito,
i have one big problem whith one E71 and we have need one Full pm from E71 working, for i use the field 120 and 309, is possible to help me?, if do u want help to me, is possible to send this Full PM, or for PM in this forum, or post this here, or do u loock how is possible help to me,
Veru thank you
BR
Max

Thanks mateeeeeeeeeeeee!!! Now phone power on normaly , and ALL OK!!
can you share with me wich program do you use to create rpl , and wich steps do you use , Thanks in advance!!!

Please do u have usated Jau or which box for repair this 5800-d, i have one whith "contact retailer", do u want to help me for which procedure to have usated and which box or tool?
Thank you
BR
Max

here 3 full pm`s from E71 v300

Hi Hari and Alex !!!
Let's Suppose i have Full pm backup Of n95 8Gb.
How to create simlock RPL by using J.A.U?

I use Cyclone to generate the RPL. Hari is working about to add the function (and more) as well in JAU.

BR

Alex

Please do u have usated Jau or which box for repair this 5800-d, i have one whith "contact retailer", do u want to help me for which procedure to have usated and which box or tool?
Thank you
BR
Max

Post the logs of infos and selftest and will be better for everybody give you suggestion about how to solve it.

BR

Alex

sir thank's a lot your sw i really amazing... more power!!!

Perhaps we could get code read, too? http://forum.gsmhosting.com/vbb/showthread.php?t=870903

oh man, ... Hope its not a SWINE FLU as its a very popular rapidly spreading flu around the Europe ...

Wish you a good health (including some garlic, onions, hot tea's and some vodka or something strong to give a good reboot for your immunity system )

BR

actually, swine flu is activating Immuno system WatchDog,
so if u get antibiotics, u go bad way ....

vitamines like C, D, D3 (lemon, oranges, fish and fish oil) really can help,
geting down strong immunological system response

b.r.
Alexandar

Hi fellas,

I have a nokia 6263 rm-207 that shut off after a while then I have to flash it to get it working back.

Here I leave some logs that can help you to have an idea:

JAU LAST VERSION's LOG

Connecting to phone....
Reading...
SW Version : V 04.44
24-09-07
RM-207
(c) Nokia
IMEI Plain : 3569XXXXXXXXXX

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0
BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN
Done!

Connecting to phone....
Reading...
SW Version : V 04.44
24-09-07
RM-207
(c) Nokia
IMEI Plain : 3569XXXXXXXXXX
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!

I have no idea why is shutting off, any help is welcome

thanks and BR,

LOL swine flu and nokia bb5s in jau thread, good start to a friday

maybe hari can put a silly "reboot immune system" button on jau:p

i have tested unlocking today with my E66 and newest 400.21.013 firmware.
unlocked sucessfully witouth any problem.
sx4 is working and no secure wd problem after unlock.

i cant check the problem without such phones...

all i unlocked till now with J.A.U have no problem.

br.
hari

LOL swine flu and nokia bb5s in jau thread, good start to a friday

maybe hari can put a silly "reboot immune system" button on jau:p


already in last update, you dont seen it? :D

http://www.entsperren.net/swineflu.JPG

Perhaps we could get code read, too? http://forum.gsmhosting.com/vbb/showthread.php?t=870903


we will see if i get code read on sl2 working...
but iam still waiting for hardware... (ordered last week)

we will see if i get code read on sl2 working...
but iam still waiting for hardware... (ordered last week)

Video cards with Nvidia cuda gpu :D:D:D!

Video cards with Nvidia cuda gpu :D:D:D!


for sl2 ??? noooo.... not needed... for sl3 yes, but not nvidia cuda, there are mutch faster solutions available :D

already in last update, you dont seen it? :D

http://www.entsperren.net/swineflu.JPG

Hi , hari now your program can help many more people :D:D
the name of jau chenge to antiFLU .:)

Hi hari
in which phones sx4 option is used and why? And how to use step by step from ur program? Also plz and my previous post
thanks.

hello

im getting this error trying to unlock n95 8gb

Connecting to phone..

Reading...
SW Version : V 06wk41v46.1
13-11-07
RM-320
(c) Nokia
IMEI Plain : 354829021346931
Reading Backups..
Field: 120, Subblock: 0, Bytes: 88 -> OK
Done! in Time: 12:00:00 AM
Failed!
Done! in Time: 12:00:00 AM
Failed!
Done! in Time: 12:00:00 AM
Failed!
Skip saving, Backups allready exists!
Done! in Time: 12:00:00 AM
Failed!
Skip saving, Backups allready exists!
Done! in Time: 12:00:00 AM
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2341500000000000
PROVIDER : Vodafone;United Kingdom
Blocks : 02
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC STATUS: CLOSED
BLOCK 2:
LOCK 2: MCC+MNC (USIM) STATUS: CLOSED

Done!
Switch JAF to Flashmode...
FLASHMODE: OK!

APE Boot Data :
Asic ID : 24200705
Asic Mode ID : 00
Asic Public ID : 1FBF7C1864A12715D2C407368DE0022CA02F54B3
HASH : BA8710A7E1CD5A2909B9A875DB27AA24
ROM ID : 00000000011500

CMT Boot Data :
Asic ID : 000000010000022600010006400C192101021103
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 19000111425C0052BFD5B0570232F46901B500E6
HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID : A8C1D6713E691FF8
CMT 1st Boot : OK!

HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
0x550200C03AFA00
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x0058)
Cert. 0x134 sent: OK!
Phone ack: 0x5502
JAF: [ERROR] - no ack > Try to connect F-Bus Adapter WHILE detecting Phone! (Backlight of Phone should go on!

BR
Gee4234

Can I with this Unlock E71 version 300.021.12??

Post the logs of infos and selftest and will be better for everybody give you suggestion about how to solve it.

BR

Alex

Hello Alex, here how have request:
INFO JAU:
Connecting to phone..

Reading...
SW Version : V ICPR71_09w04.3
26-02-09
RM-346
(c) Nokia
IMEI Plain : 352924021608810


LOCK STATUS
SIMLOCK STATUS: FAIL!



SELF TEST JAU:
Connecting to phone..

Reading...
SW Version : V ICPR71_09w04.3
26-02-09
RM-346
(c) Nokia
IMEI Plain : 352924021608810
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : FAILED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!

is possible RPL?
i have one 5800d-1 and one N96 alls whith contact retailer, is possible repair to my E71 and after i post other logs?, thank you
BR
Max

hello

im getting this error trying to unlock n95 8gb

Connecting to phone..

Reading...
SW Version : V 06wk41v46.1
13-11-07
RM-320
(c) Nokia
IMEI Plain : 354829021346931
Reading Backups..
Field: 120, Subblock: 0, Bytes: 88 -> OK
Done! in Time: 12:00:00 AM
Failed!
Done! in Time: 12:00:00 AM
Failed!
Done! in Time: 12:00:00 AM
Failed!
Skip saving, Backups allready exists!
Done! in Time: 12:00:00 AM
Failed!
Skip saving, Backups allready exists!
Done! in Time: 12:00:00 AM
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2341500000000000
PROVIDER : Vodafone;United Kingdom
Blocks : 02
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC STATUS: CLOSED
BLOCK 2:
LOCK 2: MCC+MNC (USIM) STATUS: CLOSED

Done!
Switch JAF to Flashmode...
FLASHMODE: OK!

APE Boot Data :
Asic ID : 24200705
Asic Mode ID : 00
Asic Public ID : 1FBF7C1864A12715D2C407368DE0022CA02F54B3
HASH : BA8710A7E1CD5A2909B9A875DB27AA24
ROM ID : 00000000011500

CMT Boot Data :
Asic ID : 000000010000022600010006400C192101021103
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 19000111425C0052BFD5B0570232F46901B500E6
HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID : A8C1D6713E691FF8
CMT 1st Boot : OK!

HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
0x550200C03AFA00
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x0058)
Cert. 0x134 sent: OK!
Phone ack: 0x5502
JAF: [ERROR] - no ack > Try to connect F-Bus Adapter WHILE detecting Phone! (Backlight of Phone should go on!

BR
Gee4234


use manual local mode and external power...

your phone dont have stable local mode and restarts because of to low power...

Can I with this Unlock E71 version 300.021.12??


should work...

if something goes wrong, just write back the backups witch jau makes automatically...

you can make before you unlock a full pm backup just in case.

please post log after unlock.

i have unlocked more then 15 pcs. with J.A.U.

i have unlocked E66 v400 firmware too with jau...


see my videos at youtube.

Post the logs of infos and selftest and will be better for everybody give you suggestion about how to solve it.

BR

Alex

Alex, the 5800d-1, not want enter in f/bus, i have flashated whith JAF, but whith jau or other tool, or box, forever NO connection f/bus, tomorrow i loock this.
now have entered one N96 whith Jau and Jaf, other ugual to the E71, go for "contact retailer", have flashated the v. 21 of h3g but not work, here:
Phone found on FBUS interface
Reading phone info ...
Type: RM-247
Version: V ICPR72_08w50.4 05-06-09 RM-247 (c) Nokia
IMEI: 356406020911680
SP LOCK status:
Config Key: 0000000000000000
Provider Key: 0000000000000000
Counters: 0/3, 0/10
Phone is Unlocked
Read Phone Info OK

Connecting to phone..

Reading...
SW Version : V ICPR72_08w50.4
05-06-09
RM-247
(c) Nokia
IMEI Plain : 356406020911680


LOCK STATUS
SIMLOCK STATUS: FAIL!

Connecting to phone..

Reading...
SW Version : V ICPR72_08w50.4
05-06-09
RM-247
(c) Nokia
IMEI Plain : 356406020911680
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : FAILED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!

should work...

if something goes wrong, just write back the backups witch jau makes automatically...

you can make before you unlock a full pm backup just in case.

please post log after unlock.

i have unlocked more then 15 pcs. with J.A.U.

i have unlocked E66 v400 firmware too with jau...


see my videos at youtube.

Hi,

Before unlock I've made a backup from the phone, after unlock phone has shows: Contact your retailer!!

I have wrote the backup PM , Now phone is Ok, but still locked!:D

Or mayby I have to upgrade it to version 400.XXXX.XX & than try again to unlock!

it is possible unlock 5800?????

I have 6600s to unlock:

Soft Version: V 05.23 Date: 29-10-08 Type: RM-414 (6600S-1C SLIDE)
Hash: 9DDBFCFE6E73CED7D8C6268C8EB85723

For when the support for this hash?


Thanks oOXTCOo for work great work.

J.A.U good thanx for sharing

@germangsmteam


maybe i have a present for you in shor time ;)
you whanted sl1 unlocking with original simlock table and not nokia finnland?


look here: http://www.youtube.com/watch?v=GQo218ZRhms

its working, but still have a big problem to solve...

br.
hari ;)

I have same problem, phone start up failed, what can I do for repait this n85???


Connecting to phone..

Reading...
SW Version : V ICPR72_08w44.1
10-11-08
RM-334
(c) Nokia
IMEI Plain : 356808020835498
Reading Backups..
Field: 120, Subblock: 0, Bytes: 56 -> OK
Done! in Time: 12:00:00 a.m.
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 12:00:00 a.m.
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 12:00:00 a.m.
Field: 120, Subblock: 3, Bytes: 112 -> OK
Skip saving, Backups allready exists!
Done! in Time: 12:00:00 a.m.
Field: 308, Subblock: 1, Bytes: 8192 -> OK
Skip saving, Backups allready exists!
Done! in Time: 12:00:04 a.m.
All needed Backups Done!

LOCK STATUS
SIMLOCK STATUS: FAIL!
Switch JAF to Flashmode...
FLASHMODE: OK!

CMT Boot Data :
Asic Mode ID : 00
Asic EM ID : 00000B22
Asic Public ID : 1C700012F0710052BB73D01BD472A90017BE5A13
HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID : 4B9B75103E691FF8
CMT 1st Boot : OK!

HASH SUPPORTED FOR UNLOCK!
BOOT [XSR1.6 BB5ALGORITHM]
0x550200C03AFA00
CMT Boot Ready!
SECONDARYBOOT v.01.30.00
Sending Algo...
CMT ALG Boot: OK!
Sending Initial PM...
Initial PM 308 sent: OK!
Sending Phone Cert. 0x134 (0x2000)
Cert. 0x134 sent: OK!
Phone ack: 0x5502
Sending Simlock Cert. (0x0190)
Phone ack: 0x5502
SL Cert. Sent: OK!
Sending Rap Certificate 21 v1.0 (0x1931)
Phone ack: 0x5502
Rap Cert. sent: OK!
Requesting Unlocked SL_Buffer..
Unlocked SL-Buffer received!
De-Crypt SL-Buffer...
SL buffer De-Crypted: OK!
Building Unlocked PM Field [0x78], [0x134]
Unlocked PM build: OK!
Connecting to phone..

Reading...
SW Version : V ICPR72_08w44.1
10-11-08
RM-334
(c) Nokia
IMEI Plain : 356808020835498
UNLOCKING...
Field: 308, Subblock: 1 , Bytes: 8192 -> FAIL [NEED SX4 AUTHORIZATION]
PM308 Write-Protected!
You need NCK-Methode, maybe J.A.U will do it in short time ;o)
Done! Time: 12:00:01 a.m.
Connecting to phone..

Reading...
SW Version : V ICPR72_08w44.1
10-11-08
RM-334
(c) Nokia
IMEI Plain : 356808020835498


LOCK STATUS
SIMLOCK STATUS: FAIL!
All Done!

Connecting to phone..

Reading...
SW Version : V ICPR72_08w44.1
10-11-08
RM-334
(c) Nokia
IMEI Plain : 356808020835498
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : FAILED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!



oOXTCOo hello, congratulations for the software, I am aware now. I have a N85 PHONE START UP failed.contact retailer.
I can not write to the PM, with go in test mode, can connect with, when the telephone appears this error, PHONE START UP failed.contact retailer.
INFO can read, but when I click Local SX4 gives me this error, you attach the image. you can help me? thanks

Searching For FTDI Devices...
Found 1 FTDI Device Connected
Device Description : JAF FLASHER INTERFACE
Serial Number Detected : ODJAF000
Trying To Connect Default Device Serial : ODJAF000
Opening Connection...
Connect Ok!
Initializing Connection...
Initalizing Success!
Booting JAF...
JAF FLASHER INTERFACE ready!

Connecting to phone...........
Cant detect phone! check cable!


http://img259.imageshack.us/i/jauz.jpg/

@germangsmteam


maybe i have a present for you in shor time ;)
you whanted sl1 unlocking with original simlock table and not nokia finnland?


look here: http://www.youtube.com/watch?v=GQo218ZRhms

its working, but still have a big problem to solve...

br.
hari ;)

You are getting on better and better :)
Congratulation my friend.. I think, after the sticky post, your next stage will be opening an your own support section :)
If you ever need a product supporter just PM ;)

BR and always thanks for your great Job

Alex

You are getting on better and better :)
Congratulation my friend.. I think, after the sticky post, your next stage will be opening an your own support section :)
If you ever need a product supporter just PM ;)

BR and always thanks for your great Job

Alex


you are already a great product supporter :D

lol.. deal.. pick a colour for your JAU box :)
http://www.gpgindustries.com/banners/GPGXWARE.jpg

BR

Alex

lol.. deal.. pick a colour for your JAU box :)
http://www.gpgindustries.com/banners/GPGXWARE.jpg

BR

Alex



BLACK! :D



br.
hari

but red is alo impresing with visible hardware

Black is so much better! I vote for Black!

BR

i have 5130 contact service so i tried to wr pm & to unlock it but i faild :
http://forum.gsmhosting.com/vbb/showthread.php?t=876469
..so itry with j.a.u & this log plz can u sir hlp me..thanks

Connecting to phone....

Reading...
SW Version : V 05.80
18-12-08
RM-495
(c) Nokia
IMEI Plain : 354179036633281


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.2]
[20:06:20 08.12.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.9 ***

You are number: 2 in the sequence! Please wait!
[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: FAIL!

@techno-gsm try again

edit - i just read your problem on other post-you made full back up, write back your original full back up

With thanks very much.

very good job..........................................

@germangsmteam


maybe i have a present for you in shor time ;)
you whanted sl1 unlocking with original simlock table and not nokia finnland?


look here: http://www.youtube.com/watch?v=GQo218ZRhms

its working, but still have a big problem to solve...

br.
hari ;)
Loock this:


Connecting to phone..

Reading...
SW Version : V ICPR71_09w04.3
26-02-09
RM-346
(c) Nokia
IMEI Plain : 352924026002779
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done

Reading...
SW Version : V ICPR71_09w04.3
26-02-09
RM-346
(c) Nokia
IMEI Plain : 352924026002779


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN

Done!
All Done!


Connecting to phone..

Reading...
SW Version : V ICPR71_09w04.3
26-02-09
RM-346
(c) Nokia
IMEI Plain : 352924026002779


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.2]
[15:50:59 08.12.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.9 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY DEMAGED! PHONE CANT AUTHORIZE SX4!

This is of yesterday, now the phone, power on and after 4 min.s power off, and because not is possible enter in SX4?, forever this error
BR
Max

i have 5130 contact service so i tried to wr pm & to unlock it but i faild :
http://forum.gsmhosting.com/vbb/showthread.php?t=876469
..so itry with j.a.u & this log plz can u sir hlp me..thanks

set is 5130 & its sl3 ..so its not work

dont try it

Loock this:


Connecting to phone..

Reading...
SW Version : V ICPR71_09w04.3
26-02-09
RM-346
(c) Nokia
IMEI Plain : 352924026002779
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done

Reading...
SW Version : V ICPR71_09w04.3
26-02-09
RM-346
(c) Nokia
IMEI Plain : 352924026002779


LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 0010100000000000
PROVIDER : Default Test Operator
Blocks : 01
Key Code count: 0, F-Bus Code count: 0

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: OPEN

Done!
All Done!


Connecting to phone..

Reading...
SW Version : V ICPR71_09w04.3
26-02-09
RM-346
(c) Nokia
IMEI Plain : 352924026002779


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.2]
[15:50:59 08.12.2009] *** Welcome to J.A.U SX4-Auth. Server v1.0.0.9 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY DEMAGED! PHONE CANT AUTHORIZE SX4!

This is of yesterday, now the phone, power on and after 4 min.s power off, and because not is possible enter in SX4?, forever this error
BR
Max

first check if phone is on local mode...(much better if have gpg TMA)

second if you have mxkey(much better) read if superdongle is damaged

if not damaged, just try and try until phone connects (make sure you're using latest version of JAU)

if damaged, use ub or mt for special superdongle calculation...

first check if phone is on local mode...(much better if have gpg TMA)

second if you have mxkey(much better) read if superdongle is damaged

if not damaged, just try and try until phone connects (make sure you're using latest version of JAU)

if damaged, use ub or mt for special superdongle calculation...


i make superdongle check in next update too...
but see how long mx-key exists (more then 3 years).

btw. J.A.U sx4 server is working perfekt now... if he cant authorize, his internet speed or his phone is not good...
i see it in sx4 server longs... most not authorized phones have invalid superdongle key!
there are less then 5% other errors...




@all today nigth or tomorow (dont know when i have time for it) jau becomes a mutch better and faster server.
access server and sx4 server will be offline for short time.

second if you have mxkey(much better) read if superdongle is damaged


yes it´s better but it´s not free and it has a team behind the project.. J.A.U it´s a free tool with SX4 server for FREE and it´s only one guy behind this tool so for me it´s good tool..
keep it up oOXTCOo good job

first check if phone is on local mode...(much better if have gpg TMA)

second if you have mxkey(much better) read if superdongle is damaged

if not damaged, just try and try until phone connects (make sure you're using latest version of JAU)

if damaged, use ub or mt for special superdongle calculation...

Good, i don't understand because this phone, after haved other Imei, and have repaired whith one friend writing one Rpl Plain, for sim lock key, calculate whith one full pm from old IMEI, when i writed this RPL, the phone have changed imei and now have your IMEI ORIGINAL writed in the down battery, but the phone, was working.
After, i have write other Rpl calculated from one full pm of this original imei and here stated the problems, now the phone, have alls PASSED, unique for display test, and yesterday i have open for controll if was all ok, but not is HW the problem, is SW, when i have writed this New Rpl calculaed from full pm of Jau o-400.
The first rpl, i have calculated from one full pm whith SX4 of Jaf 0-512 and the phone the unique probleme was one time dver 1 day power off, now power off in 4 min.s, please whats i want to do whith this phone?, i'm not see in local mode because the phone read the sim regular and tell/receive, but only for 4 minuts, after power off.
Thanx for one help please, i have the adaptator for the Mt/jaf, whith the usb local, power supply local, but i don't know how use this, i loock 2 fili one green(bsi) and other Red (VPP), other i not know how use.
Have one video or guide for use this GPG adaptator?, re.thanks

thankssssssssssssssssssss good work

very goodddddddddddddd

Thanx for one help please, i have the adaptator for the Mt/jaf, whith the usb local, power supply local, but i don't know how use this, i loock 2 fili one green(bsi) and other Red (VPP), other i not know how use.
Have one video or guide for use this GPG adaptator?, re.thanks

This is a bit offtopic but I can point you to the rigth section, post question there.

http://forum.gsmhosting.com/vbb/showthread.php?t=819024&highlight=UFCV2

Hi I m Motaher . I m new user of this site . thanks to all ..................

yes it´s better but it´s not free and it has a team behind the project.. J.A.U it´s a free tool with SX4 server for FREE and it´s only one guy behind this tool so for me it´s good tool..
keep it up oOXTCOo good job

yep right...

i'm using mxkey also JAU...

its good partner for hwk and jaf....

just a few minutes ago i recieved a 6680 with config:0000000

and i have a hard time repairing the phone...:D

i'ts not supported with J.A.U..:( (much better if mr.hari also add those old rap3gv2 phones in future updates)

i can't repair the phone with mxkey,always give me error...

and some other free tools like on zulea and bb5prince...grrrrrrr

but i fix the phone using jafsupport no tp unlocker...

i mr hari will add unlocking for old bb5, much better if like on jafsupport no tp unlocker, coz i work flawlessly....

two thumbs up for mr.hari...

coding like this software was'nt easy, it needs for time and effort...

and its for free...wow







bes regards,
pinoy techs ;)

thankssssssssssssssssss

@oOXTCOo

CAN THIS VERSION BE UNLOCKED BY JAU? 5800d RM-356 V 30.0.011


WBR
sahil2000ind

Not at this moment brother,i think his working on it.

br:superboy24

Not at this moment
im sorry its bn posted twice
br:superboy24

Hi I have this problem. The modem actually doesn't ask for NCK code at all. Any help would be helpful



Contacting Server...
Done!
Calculating Code..
Your Unlock Code Calculated Successfully!!!
Imei: 35159603384582
Code: 33599129
Done!
================================================== =========



YOUR MODEM MUST BE DISCONNECTED!!!

PLEASE CONNECT YOUR DEVICE NOW AND WAIT!

DETECTING DEVICE... PLEASE WAIT!

HUAWEI Mobile Connect - 3G PC UI Interface Device Detected!
On port : COM7
PLEASE WAIT...
Baudrate : 115200
Connecting...
Connected Successfully!
Reading Info...
================================================== =========
Vendor : HUAWEI
Model : E160
Version : 11.608.02.00.94IMEI : 351596033845829
SIMLOCK : ACTIVE! (Cardlock)
UNLOCKING DEVICE...
SUCCESSFULLY UNLOCKED!
================================================== =========
Vendor : HUAWEI
Model : E160
Version : 11.608.02.00.94IMEI : 351596033845829
SIMLOCK : ACTIVE! (Cardlock)
================================================== =========
All Done!
================================================== =========

:confused::confused:

NEW SERVER, FASTER INTERNET SPEED!!!
NOW ITS DONE!

New faster Server!!!
More Ram more Ghz Prozessor, USV and a Dubble faster Internet Connection + SX4 Server Update....


so test it, J.A.U demo account will be closed THIS WEEK!

So if you have not be able to login or dont reached the sx4 server, the reason was the update / upgrade.

.)reinstalled all new to new server.
.) now using apache with mysql, php + cgi for server.


J.A.U runs now with complete new hardware (expect sx4 card)... all is new!

GUAR FORUM
J.A.U Official Support Team

Hi I have this problem. The modem actually doesn't ask for NCK code at all. Any help would be helpful



Contacting Server...
Done!
Calculating Code..
Your Unlock Code Calculated Successfully!!!
Imei: 35159603384582
Code: 33599129
Done!
================================================== =========



YOUR MODEM MUST BE DISCONNECTED!!!

PLEASE CONNECT YOUR DEVICE NOW AND WAIT!

DETECTING DEVICE... PLEASE WAIT!

HUAWEI Mobile Connect - 3G PC UI Interface Device Detected!
On port : COM7
PLEASE WAIT...
Baudrate : 115200
Connecting...
Connected Successfully!
Reading Info...
================================================== =========
Vendor : HUAWEI
Model : E160
Version : 11.608.02.00.94IMEI : 351596033845829
SIMLOCK : ACTIVE! (Cardlock)
UNLOCKING DEVICE...
SUCCESSFULLY UNLOCKED!
================================================== =========
Vendor : HUAWEI
Model : E160
Version : 11.608.02.00.94IMEI : 351596033845829
SIMLOCK : ACTIVE! (Cardlock)
================================================== =========
All Done!
================================================== =========

:confused::confused:


1.) you can use another connecction manager witch ask for unlock code
or
2.) u use J.A.U direct unlock function... (check the 2 checkboxes) do jobs..

J.A.U UPDATE V2.7.3 READY!


Its a small update, because most work is not finished for now but here are the news:

================================================== ======
WHATS NEW? (V2.7.3):
.) Now when you Press "Check Lock Status" or "Read Phone Info" J.A.U will check
the Superdongle key, to know if Secure Watchdog is Enabled!
Also Security and Simlock will be tested.
.) Fixed Keycode and FBuscode Counter, now it is Displayed rigth in Decimal.
.) Dont use SL1 Unlocking, cause iam not finished with it!
.) Minor Bug Fixes.
.) SX4 - Server Improvements! Please use ONLY the latest J.A.U.exe


================================================== ======



Connecting to phone....

Reading...
SW Version : V ICPR72_09w20.12
10-09-09
RM-356
(c) Nokia
IMEI Plain : 355225034211262

ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
SUPERDONGLE DATA : VALID!

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 8000000000000000
PROVIDER KEY : 2320300000000000
PROVIDER : T-Mobile ;Austria
Blocks : 2
Key Counter : 0/3
F-Bus Counter : 0/10

BLOCK 1:
LOCK 1: MCC+MNC (USIM) STATUS: CLOSED
BLOCK 2:
LOCK 2: MCC+MNC (USIM) STATUS: CLOSED

Done!
All Done!




br.
hari

Thanks for it and pleas change the color of program .
Best Regards.
GsmOrient.

Thanks for it and pleas change the color of program .
Best Regards.
GsmOrient.

WTF? :DThe colour is great!!




@ooxtcoo

I think I find a bug, I calculate de pm 120 with own mcc+mnc and the original imei, and when I try to write pm , I just clck the "write pm" buttom but nothing happend.. Please check this and tellme if I'm doing something wrong.

BR

WTF? :DThe colour is great!!




@ooxtcoo

I think I find a bug, I calculate de pm 120 with own mcc+mnc and the original imei, and when I try to write pm , I just clck the "write pm" buttom but nothing happend.. Please check this and tellme if I'm doing something wrong.

BR


thanks, yes there seems something wrong...
use the next tab "bb5" and write created pm with normal function till i have fixed this...


about color, i like the color, but just delete the skin file from jau directory and you have original skin...

WTF? :DThe colour is great!!




@ooxtcoo

I think I find a bug, I calculate de pm 120 with own mcc+mnc and the original imei, and when I try to write pm , I just clck the "write pm" buttom but nothing happend.. Please check this and tellme if I'm doing something wrong.

BR




FIXED, please download new fixed version:

WHATS NEW? (V2.7.4):
.) Fixed the "Write PM" Button
.) Fixed PM Backup Reading

The skin is perfect :)
I have just a little problem... I want to use the "Donate" button and it will sort my in the pay-pal page but don't understand what to do...it's in your language the page...
I used Google to translate but it will by more easy to have the page in English .
A little donation for your hard work !It will be cool if other members do it to support your work :)
Now back to work...have more 10minutes and finish ...
P.S: when you have the time for LG to add I'm here to help :)

br,
free1600

The skin is perfect :)
I have just a little problem... I want to use the "Donate" button and it will sort my in the pay-pal page but don't understand what to do...it's in your language the page...
I used Google to translate but it will by more easy to have the page in English .
A little donation for your hard work !It will be cool if other members do it to support your work :)
Now back to work...have more 10minutes and finish ...
P.S: when you have the time for LG to add I'm here to help :)

br,
free1600


i have already tried to set it to english, but it dont work...
i have already set the account to english and the link to us_EN but it is always displayed in german... :confused:

but you can go to support forum of jau, ******** have writte a tutorial with screenshots in english...

i try to set a donate button in english on jau website, maybe this will work...

The skin is perfect :)
I have just a little problem... I want to use the "Donate" button and it will sort my in the pay-pal page but don't understand what to do...it's in your language the page...
I used Google to translate but it will by more easy to have the page in English .
A little donation for your hard work !It will be cool if other members do it to support your work :)
Now back to work...have more 10minutes and finish ...
P.S: when you have the time for LG to add I'm here to help :)

br,
free1600
Thank you but, donation for JAU work in progress and JAU free resources.


How to donate like this.

http://i708.photobucket.com/albums/****/********/goodjob2.jpg

************************************************** **************
************************************************** ****************

The way I got it to work in english was.

1st. http://www.paypal.ca/ca/cgi-bin/webscr?cmd=_home (http://www.paypal.ca/ca/cgi-bin/webscr?cmd=_home)
2nd. Login in to your account
3nd. Open J.A.U any version.
4th. Go to Setting then Click on J.A.U PayPAL donate

A new window will open with english or your country language.

http://i708.photobucket.com/albums/****/********/paypal.gif


P.S.
After you donate post Confirmation number, PM me for your personal J.A.U login,
provide me your J.A.U password in PM.

searching some beta tester for simlock.rpl function!

if someone have a phone for testing let me know, to send a beta test version of J.A.U.

i have progged an auto simlock repair funktion per rpl.


if phones pm120 is not tempered, jau reads all full automaticaly from phone and creates the simlock.rpl

later i whant to make auto rpl uploading too, but first we need to test the created rpl´s.


see log:

Connecting to phone..

Reading...
SW Version : V ICPR72_09w09
02-03-09
RM-333
(c) Nokia
IMEI Plain : 355708024742883

REMEMBER:
This RPL only works if PM120 is NOT TAMPERED!


Reading..
Field: 120, Subblock: 0, Bytes: 88 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 3, Bytes: 112 -> OK
Skip saving, Backups allready exists!
Done! in Time: 00:00:00


Needed Fields Present!
SIMLOCK-TABLE: PRESENT SIZE : 88 Byte(s)
RSA SIGNATURE: PRESENT SIZE : 80 Byte(s)
SHA-1 / HMAC : PRESENT SIZE : 20 Byte(s)

Save created Simlock repair RPL..

ALL DONE!


.) if phones pm120 is not overwritten (tampered), just press "create simlock rpl".

.) if pm120 is tempered but simlock keys are okay, you can create the rigth simlock table with jau and write it to phone, after this you can use
simlock rpl repair funktion...

.) if simlockkeys already invalid, this solution will not work!



so, if anyone have a phone to test, send me email to: harald.kubovy@gmx.at for beta test version of jau.

i think simlock.rpl creation was never been easyer then now with jau ;)

it will be full automatic when i have rpl writing implemented... (for now you need jaf or some other software to write rpl) i will addjust this function when i know this simlock repair rpl function is working!

br.
hari

ps: manual local mode function is not working in last version o jau, i have fixed this already, will be released when simlock.rpl is tested and finished.

searching some beta tester for simlock.rpl function!

if someone have a phone for testing let me know, to send a beta test version of J.A.U.

i have progged an auto simlock repair funktion per rpl.


if phones pm120 is not tempered, jau reads all full automaticaly from phone and creates the simlock.rpl

later i whant to make auto rpl uploading too, but first we need to test the created rpl´s.


see log:

Connecting to phone..

Reading...
SW Version : V ICPR72_09w09
02-03-09
RM-333
(c) Nokia
IMEI Plain : 355708024742883

REMEMBER:
This RPL only works if PM120 is NOT TAMPERED!


Reading..
Field: 120, Subblock: 0, Bytes: 88 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 1, Bytes: 80 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 2, Bytes: 20 -> OK
Done! in Time: 00:00:00
Field: 120, Subblock: 3, Bytes: 112 -> OK
Skip saving, Backups allready exists!
Done! in Time: 00:00:00


Needed Fields Present!
SIMLOCK-TABLE: PRESENT SIZE : 88 Byte(s)
RSA SIGNATURE: PRESENT SIZE : 80 Byte(s)
SHA-1 / HMAC : PRESENT SIZE : 20 Byte(s)

Save created Simlock repair RPL..

ALL DONE!
.) if phones pm120 is not overwritten (tampered), just press "create simlock rpl".

.) if pm120 is tempered but simlock keys are okay, you can create the rigth simlock table with jau and write it to phone, after this you can use
simlock rpl repair funktion...

.) if simlockkeys already invalid, this solution will not work!



so, if anyone have a phone to test, send me email to: harald.kubovy@gmx.at for beta test version of jau.

i think simlock.rpl creation was never been easyer then now with jau ;)

it will be full automatic when i have rpl writing implemented... (for now you need jaf or some other software to write rpl) i will addjust this function when i know this simlock repair rpl function is working!

br.
hari

ps: manual local mode function is not working in last version o jau, i have fixed this already, will be released when simlock.rpl is tested and finished.


i have here sir for test 5130c simlock data corrupted

please add me to your YM

maxie1172000

i have here sir for test 5130c simlock data corrupted

please add me to your YM

maxie1172000


this phone is sl3, sorry only bb5+ sl2 phones...
simlock uploading is not working with sl3 phones.

but iam shure you just need to restore the original simlock table, you can use jau for it.

sir how can i use this to unlock my nokia 5320 xm phone?

sir how can i use this to unlock my nokia 5320 xm phone?


you cant unlock sl3 phones with jau...

to unlock sl3 phones you can send phones to me if you whant...
we unlock with dm3.

this phone is sl3, sorry only bb5+ sl2 phones...
simlock uploading is not working with sl3 phones.

but iam shure you just need to restore the original simlock table, you can use jau for it.


5130c have PM 120 sir ? because i try to write full PM but i get this error

here the error

http://img189.imageshack.us/img189/6796/snap176.png

5130c have PM 120 sir ? because i try to write full PM but i get this error

here the error

http://img189.imageshack.us/img189/6796/snap176.png


please use only last version of jau...


make phone info or check logs and post the log here, to see where is the problem with your phone.


and yes sl3 phones have pm120 too and can be repaired same way like sl2 if subblock 0 is wrong.


also i fixed many bugs in new version and also fixed some sx4 auth problems.
ppl how using old version of jau for sx4 auth, makes problems on server.

so please all use new version for sx4 auth.

here is the info of phone sir


Connecting to phone..

Reading...
SW Version : V 06.94
21-07-09
RM-495
(c) Nokia
IMEI Plain : 354179031899614

ST_SIM_LOCK_TEST : FAILED!
ST_SECURITY_TEST : PASSED!



Test result
Connecting to phone..

Reading...
SW Version : V 06.94
21-07-09
RM-495
(c) Nokia
IMEI Plain : 354179031899614
TEST RESULTS :
ST_EAR_DATA_LOOP_TEST : PASSED!
ST_SIM_CLK_LOOP_TEST : PASSED!
ST_SIM_IO_CTRL_LOOP_TEST : PASSED!
ST_SIM_LOCK_TEST : FAILED!
ST_SECURITY_TEST : PASSED!
ST_SEC_LCD_TEST : NOT TESTED!
Done!



when i try to connect to server here is the error

Connecting to phone..

Reading...
SW Version : V 06.94
21-07-09
RM-495
(c) Nokia
IMEI Plain : 354179031899614


Connecting to J.A.U SX4 Server: ooxtcoo.dontexist.net
[JAU_Version: v2.7.4]
[06:28:07 13.12.2009] *** Welcome to J.A.U SX4 Server v1.0.14 ***

[SERVER STATE: OK!]
Start SX4 Authorization...
Step1: OK!
Error Step 2!
MAYBE SUPERDONGLE KEY DEMAGED! PHONE CANT AUTHORIZE SX4!



i try to write pm 120

here is the error

Connecting to phone..

Reading...
SW Version : V 06.94
21-07-09
RM-495
(c) Nokia
IMEI Plain : 354179031899614

Writing Created PM 120 Repair file...
Field: 120, Subblock: 0, Bytes: 88 -> OK
Done! Time: 12:00:00 AM

LOCK STATUS
SIMLOCK STATUS: FAIL!
MAYBE SUPERDONGLE KEY DEMAGED! PHONE CANT AUTHORIZE SX4!

http://img526.imageshack.us/img526/9594/snap183.png

Reading...
SW Version : V 07.20
23-10-08
RM-146
(c) Nokia.
IMEI Plain : 353095025820278

ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
SUPERDONGLE DATA : INVALID!
Secure Watchdog enabled! Phone will Restart randomly! Repair Superdongle Key

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
PROVIDER : Nokia Test Operator;Finnland
Blocks : 7
Key Counter : 0/3
F-Bus Counter : 0/10

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Done!


WBR
sahil2000ind

Reading...
SW Version : V 07.20
23-10-08
RM-146
(c) Nokia.
IMEI Plain : 353095025820278

ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
SUPERDONGLE DATA : INVALID!
Secure Watchdog enabled! Phone will Restart randomly! Repair Superdongle Key

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
PROVIDER : Nokia Test Operator;Finnland
Blocks : 7
Key Counter : 0/3
F-Bus Counter : 0/10

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Done!


WBR
sahil2000ind

reset npc then wrote rpl without simlock data

Thank you.:D....;)

Thread: J.A.U - Just Another Unlocker by ooxtcoo >>>>>>>>>> Reply to Thread

Reading...
SW Version : V 07.20
23-10-08
RM-146
(c) Nokia.
IMEI Plain : 353095025820278

ST_SIM_LOCK_TEST : PASSED!
ST_SECURITY_TEST : PASSED!
SUPERDONGLE DATA : INVALID!
Secure Watchdog enabled! Phone will Restart randomly! Repair Superdongle Key

LOCK STATUS
SIMLOCK STATUS: OK!
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
PROVIDER : Nokia Test Operator;Finnland
Blocks : 7
Key Counter : 0/3
F-Bus Counter : 0/10

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Done!


WBR
sahil2000ind


your superdongle data is empty.
you need to write original pm308 backup if you have one in state where all is okay or you can repair sx4 with ub or mt, or nokia rpl.