Hi!
I resive new working R210e ( no droped, no water damege) I have unlock it - all Ok. Try flash but resive "flash erase eror" after erasing 5th blok. Try feu times - it same... Soft, flash, box, cabel is Ok 100% Flash chip is glued :( Now phone is dead...
What can I do wyth it? Any idea?

wrong section!!!

moved from GSM Hardware

i think, its not hardware problem!!!

I thynk, it is flash chip or cpu bed or PCB so it`s HD prob. :)
Lets look what ather peopel thynks!
It`s a second phone what I have wyth thys problem...

Hello Porter ,

one of these three ways can help in your pb :)
1) try to flash phone again , with fully charged battery. ( but i think that you have tried it already :) )
2) reball flash chip ( in some cases it is proc fault because of bad soldering, so you need reball it too )
3) replace flash chip with good one .

RGDS
VIK

ok, I uderstend! Thenks!
Maby some info how to savely remuve (desold) glued cheep?

must be high pc speed .....

-=G3=-

2 -=G3=-
You are wrong! Because for ather phone from same box I flash without any problem! I`t only Phone HD problem can be!

sir resure u flash phone as 210e
not r210s
thanks

Can anybody help me?

I try to unlock model: R210S with SW 210E readed
on stick under battery and after unlock with Paderf 4.0
and standard chinese box, phone want to turn on ?

Before that i unlocked 4 phones, same SW, without
problem.

Can i flash that phone with chinese box?
Anybody have full flash for that phone and eeprom, and SW which can i use for flashing?

HELP!

2 stigor
Hi!
R210s and R210e have a same unlock algoritm!!! Only Flash (and hardwar) is diferent.
Maby You pres any button on phone during unlocking proces! I kill one R210 thys way... But Don`t wory, just use I2C cabel to write new eeprom dump (ICprog or PonyProg) and write beck original IMEI. If I2C cabel not work (on some phone) - You need to disasemble phone, desold EEprom (small 8 pin chip neear down left corner of CPU as I remember) and write it using external programator.
And all be ok!

2 fonec
Stiupit recomendation, because normal phone fleshing Ok like R210e and like R210s (Just work not proper because HD is difrerent in s and e) So, problem not in bead flash wersion!
I`m knou what flash file to use!
But thenks to adwise! :-)