View Full Version : lg GC900
amine_tn
10-24-2009, 18:41
I have a lg GC900 I can not have the flash he made an error in phase :Erasing dynamic eep area .:confused:
Charge battery at first-after flash via USB
Regards,Vygis
amine_tn
10-26-2009, 11:29
but the flash usb without battery
amine_tn
10-26-2009, 18:19
help me vygis team :confused:
Actually don't know how to help-problem never meet before-and believe me-I flashed hundreds of GC900 before.What was phone state before flashing?
Regards,Vygis
Maybe also to try to flash with RJ45 for tests-flashing won't be finished completely,but will be possible to check if dynamic eep can be erased or not.
amine_tn
10-27-2009, 11:09
then I may try the cable with RJ 45
amine_tn
10-27-2009, 18:28
even with the RJ45 cable is the same thing
the log:
Please power ON phone
----------------------------------------------------------
Loading primary loader ... OK
Loading secondary loader ... OK
Changing baudrate ... OK
Setting bus ... OK
Loading certificate ... OK
----------------------------------------------------------
Reading phone info ... OK
Operation failed
----------------------------------------------------------
Writing flash from file : GC900AT-00-V10b-ARB-XXX-JUL-03-2009_EN_ARAB_FARSI_GER_FR_NL_PT_TR_ES_RU.fls
----------------------------------------------------------
Checking flash file ... OK
Extracting flash files ... OK
Found 10 files for writing
Writing flash : ../../../wou_build/VIEWTY2_EUROPE_OPEN_REL
EASE/MPEH_VIEWTY2_EUROPE_OPEN.dsp ... OK
Writing flash :
MPEH_VIEWTY2_EUROPE_OPEN.eep ... OK
Erasing dynamic eep area ...
Operation failed
:confused::confused::confused::confused:
Sorry,but as I said before-I can't imagine how help for you,as such problem was never meet before.Actually want to ask again-what was phone state before flashing?
Regards,Vygis
amine_tn
10-28-2009, 10:02
it turns on and displays "lg" and it stays that way
Sorry-for me looks to hardware problem.
Regards,Vygis
bousefield1
11-08-2009, 19:08
Sorry-for me looks to hardware problem.
Regards,Vygis
1-start lgi 59 and select gc900 download any of the support flashes and save to desktop.
2-get a usb lead ready for your phone and connect to a usb port on computor.
3-remove battery from phone.(make sure fully charged battery )
4.set port to vygis and press connect box.
5.when box connected were it says ke500 lead change to usb
6. now select flash tab and load flashfile.
7.now press connect phone plug usb lead into phone and and press power
phone will show lg logo and vygis will read phone when this has finished
go back to flash tab and press do jobs and then it will flash in usb mode.
this worked for me ok and the phone is working fine after having the lg logo and no boot problem hope it works for you
amine_tn
11-09-2009, 12:21
1-start lgi 59 and select gc900 download any of the support flashes and save to desktop.
2-get a usb lead ready for your phone and connect to a usb port on computor.
3-remove battery from phone.(make sure fully charged battery )
4.set port to vygis and press connect box.
5.when box connected were it says ke500 lead change to usb
6. now select flash tab and load flashfile.
7.now press connect phone plug usb lead into phone and and press power
phone will show lg logo and vygis will read phone when this has finished
go back to flash tab and press do jobs and then it will flash in usb mode.
this worked for me ok and the phone is working fine after having the lg logo and no boot problem hope it works for you
I'll try this solution