DC-Phoenix v65 update! region/demo conversion for new phones p20, p20 pro and other.. - Page 5 - GSM-Forum

disable-lock · 12-29-2018, 20:47

Its possible to remove demo mate 20 pro i have 5 devices

mutahhar · 12-31-2018, 15:03

Quote:

Originally Posted by Namelocked

DC-Phoenix v65 update

New functions and features added:

OEMINFO partion writing.
Bootloader loading in Huawei 1.0 port or testpoint (now can start ram loader and fastboot alone from testpoint).
Testpoint picture automatic download.
Region conversion, demo conversion for many phones included P20, P20 pro and other.

Supported Hisilicon CPU's for testpoint and loader:

Kirin655
Kirin710
Kirin925
Kirin930
Kirin935
Kirin950
Kirin955
Kirin960
Kirin970
Kirin980 (only your own OEMINFO file writing)

OEMINFO automatic download from server
Possible to use your own OEMINFO file with 'drag and drop'
Change vendor/country/model in OEMINFO (useful if phone cannot power on and you do not know correct data that belongs to it)
Automatic OEMINFO modification , for possibility to change region or to do downgrade
Model change before writing OEMINFO
For now, only HiSilicon based models supported
No need to unlock FRP or Bootloader to write OEMINFO (only for currently supported models), new security models by testpoint only
Exrtacting all partitions from Update.APP file now changed to Extract selected, where you can extract partitions of your choice
Speedup process for flashing in fastboot, no extracting to disk required anymore.

Supported for region conversion:

Huawei P20 Pro
Huawei P20
Huawei Honor 10
Huawei Honor Note 10
Huawei Honor V10
Huawei Nova 3
Huawei Nova 3i
Huawei P Smart+
Huawei Honor 10 Lite
Huawei Y9 2019
Huawei Honor 8X
Huawei Mate 20 Lite
and older phones ..

Safer procedure (OTA updates won't work):
1. Rewrite OEMINFO with correct vendor/country and model
2. Write only customization file matching details of vendor/country and model

Propper procedure:
1. Rewrite OEMINFO with correct vendor/country and model
2. Write only XLOADER partition from selected destination firmware (Advanced mode, leave check box only on one partition) and check if phone turns on afterwards, if not then flash another, until you find correct one (One that will turn on mobile)
3. Flash firmware and customization in Update mode with DC-phoenix or from SD card. (DO NOT attempt to change android version, must write same one)

Procedure is risky, adviced to attempt it only for advanced users, read and investigate as much as possible about your mobile before doing anything.
Each new model is based on different hardware therefore any file won't fit it.

Download HERE

Can you please add LYA-L29 oeminfo
i can see in sample screenshot you have that device
and it says firmware written successfully

Namelocked · 01-02-2019, 15:12

Quote:

Originally Posted by Zachary_C

can write nova 2S? HWI-AL00 and hwi-TL00?

If you have files and it is listed in supported models: https://www.dc-unlocker.com/supportedmodelsdcpx.php then yes.

Quote:

Originally Posted by m_ismail03

HI, i have p20 EML-L29 dead
just show me in driver HUAWEI USB COM 1.0
i try to do steps for repair it ; but the phone not conected with DC
_________________________________________

Looking for a device in upgrade mode
No devices detected in upgrade mode

No device detected to update

_________________________________________

plzz help me

It doesn't seem that you use correct file though. Must use Board software.

Quote:

Originally Posted by Master-ZizO

nova 3i always fail write oeminfo or erase ,
even if bootloader unlocked!! .. and with testpoint too

Please copy/paste full info from software.

Quote:

Originally Posted by dimon

Is it possiable convert Mate 20 pro LYA-L29 demo unit to retail?

Only if you have oeminfo file for it, then maybe yes.

Quote:

Originally Posted by sahbettin

hi team. my phone. BLA-L29 8.0.0.140C185. Which of these files fits. downgrade i want to do.
Kirin970_T1_A8.0_V1
Kirin970_T1_A8.0_V2
Kirin970_T1_A8.1_V4
Kirin970_T2_A8.0_V3
Kirin970_T2_A8.1_V5 ?? PLS help mee..

Any of them may fit your mobile.

Quote:

Originally Posted by disable-lock

Its possible to remove demo mate 20 pro i have 5 devices

Only if you have oeminfo file for it, then maybe yes.

Quote:

Originally Posted by mutahhar

Can you please add LYA-L29 oeminfo
i can see in sample screenshot you have that device
and it says firmware written successfully

We could if we would have it.

midhon · 01-05-2019, 17:12

hi, i have a STF-L09 in testpoint mode, but when flashing kirin960 bootloader I always get:

Device detected:
COM10: HUAWEI USB COM 1.0 (COM10)
BOOTLOADER File to update: Kirin960_T0_A8.0_V2
OEM File to update: STF-L09
05. 01. 2019 17:07:18 Starting to write device...

Writing bootloader...
Writing Kirin960_T0_A8.0_V2_3. dtwork...

Error writing Bootloader
05.01.2019 17:07:41 Writing device finished - INCOMPLETE

any idea on how to solve that?

Namelocked · 01-07-2019, 13:25

Quote:

Originally Posted by midhon

hi, i have a STF-L09 in testpoint mode, but when flashing kirin960 bootloader I always get:

Device detected:
COM10: HUAWEI USB COM 1.0 (COM10)
BOOTLOADER File to update: Kirin960_T0_A8.0_V2
OEM File to update: STF-L09
05. 01. 2019 17:07:18 Starting to write device...

Writing bootloader...
Writing Kirin960_T0_A8.0_V2_3. dtwork...

Error writing Bootloader
05.01.2019 17:07:41 Writing device finished - INCOMPLETE

any idea on how to solve that?

You should try flashing different loader in such case.

dansonyee · 01-27-2019, 06:25

i want to change jsn-al00 to jsn-L21,L22 no model support?

can u update this and this jsn-L21 firmware?

Namelocked · 01-28-2019, 10:39

Quote:

Originally Posted by dansonyee

i want to change jsn-al00 to jsn-L21,L22 no model support?

can u update this and this jsn-L21 firmware?

Sorry, but it isn't supported.

smp_comms · 01-29-2019, 12:16

mate 20 lite SNE-LX1 Demo remove possible?
Tried writing OEMINFO SNE-L01 but fails

Namelocked · 01-29-2019, 16:22

Quote:

Originally Posted by smp_comms

mate 20 lite SNE-LX1 Demo remove possible?
Tried writing OEMINFO SNE-L01 but fails

Need to load bootloader first as explained in first post.

smp_comms · 01-29-2019, 16:37

Quote:

Originally Posted by Namelocked

Need to load bootloader first as explained in first post.

followed as per instructions. Phone is in testpoint, Flashes bootloader with no problem but oeminfo write fails with error: FAIL command not allowed

Sent from my iPhone using Tapatalk

smp_comms · 01-29-2019, 20:04

Quote:

Originally Posted by smp_comms

followed as per instructions. Phone is in testpoint, Flashes bootloader with no problem but oeminfo write fails with error: FAIL command not allowed

Sent from my iPhone using Tapatalk

Here is full log

Device detected:
COM25: HUAWEI USB COM 1.0 (COM25)
BOOTLOADER File to update: Kirin710_T1_A8.1_V1
OEM File to update: SNE-L01
29/01/2019 18:59:14 Starting to write device...

Writing bootloader...
Writing Kirin710_T1_A8.1_V1_3.dtwork...
Writing Kirin710_T1_A8.1_V1_4.dtwork...
Writing Kirin710_T1_A8.1_V1_5.dtwork...

Waiting for fastboot device...
Device found: HVY02188xxxx3543

Looking for a device in fastboot mode
Device found: HVY02188xxxx3543

SN:HVY02188xxxx3543
IMEI:86932xxxxxxxxxx

IMEI1:000000000000000

MEID:00000000000000
Build number: :SNE-LX1 8.2.0.101(C652)
Model: SNE-LX1
Battery state: 4071mv

Writing OEMINFO partition
OEMINFO partition UPDATE :FAIL Command not allowed

Update fastboot mode failed
29/01/2019 19:00:28 Writing device finished - INCOMPLETE

Namelocked · 01-30-2019, 10:33

Quote:

Originally Posted by smp_comms

Here is full log

Device detected:
COM25: HUAWEI USB COM 1.0 (COM25)
BOOTLOADER File to update: Kirin710_T1_A8.1_V1
OEM File to update: SNE-L01
29/01/2019 18:59:14 Starting to write device...

Writing bootloader...
Writing Kirin710_T1_A8.1_V1_3.dtwork...
Writing Kirin710_T1_A8.1_V1_4.dtwork...
Writing Kirin710_T1_A8.1_V1_5.dtwork...

Waiting for fastboot device...
Device found: HVY02188xxxx3543

Looking for a device in fastboot mode
Device found: HVY02188xxxx3543

SN:HVY02188xxxx3543
IMEI:86932xxxxxxxxxx

IMEI1:000000000000000

MEID:00000000000000
Build number: :SNE-LX1 8.2.0.101(C652)
Model: SNE-LX1
Battery state: 4071mv

Writing OEMINFO partition
OEMINFO partition UPDATE :FAIL Command not allowed

Update fastboot mode failed
29/01/2019 19:00:28 Writing device finished - INCOMPLETE

If it happens with all 710 loaders that are available on software, then at the moment no solution for your mobile version. Until new loaders are available.

rebainoor · 01-30-2019, 11:50

Please add
Erase any partition to soft in HUAWEI COM1.0 mode (custom erase partition)

orhan5 · 02-05-2019, 11:48

Sir i have P10
i try flash many many times board softeare this version "HLVTRAL00M00A063_Board Software_China_Nonspecific_Android 7.0_EMUI5.1_05022AVG
to my phone cuz phone dead after flash
did u have newer than board software
notic

Code:

tested all tool all boxes same error the phone does not have hardware problem

thanks advance
and sorry to lose ur time

Namelocked · 02-05-2019, 17:13

Quote:

Originally Posted by orhan5

Sir i have P10
i try flash many many times board softeare this version "HLVTRAL00M00A063_Board Software_China_Nonspecific_Android 7.0_EMUI5.1_05022AVG
to my phone cuz phone dead after flash
did u have newer than board software
notic

Code:

tested all tool all boxes same error the phone does not have hardware problem

thanks advance
and sorry to lose ur time

No, there isn't newer than that.

01-27-2019, 06:25	#66 (permalink)
dansonyee Crazy Poster Join Date: May 2015 Location: Malaysia Posts: 54 Member: 2399487 Status: Offline Thanks Meter: 3	huawei honor 8x cannot i want to change jsn-al00 to jsn-L21,L22 no model support? can u update this and this jsn-L21 firmware?

02-05-2019, 11:48	#74 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	About P10 Vtr-L29 Dead After Flash Sir i have P10 i try flash many many times board softeare this version "HLVTRAL00M00A063_Board Software_China_Nonspecific_Android 7.0_EMUI5.1_05022AVG to my phone cuz phone dead after flash did u have newer than board software notic Code: tested all tool all boxes same error the phone does not have hardware problem thanks advance and sorry to lose ur time Last edited by Namelocked; 02-05-2019 at 17:12.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-29-2018, 20:47	#61 (permalink)
disable-lock Freak Poster Join Date: Mar 2016 Location: morocco Posts: 171 Member: 2541944 Status: Offline Sonork: 1500106510 Thanks Meter: 29	Its possible to remove demo mate 20 pro i have 5 devices

01-05-2019, 17:12	#64 (permalink)
midhon Junior Member Join Date: Oct 2018 Posts: 2 Member: 2871103 Status: Offline Thanks Meter: 2	hi, i have a STF-L09 in testpoint mode, but when flashing kirin960 bootloader I always get: Device detected: COM10: HUAWEI USB COM 1.0 (COM10) BOOTLOADER File to update: Kirin960_T0_A8.0_V2 OEM File to update: STF-L09 05. 01. 2019 17:07:18 Starting to write device... Writing bootloader... Writing Kirin960_T0_A8.0_V2_3. dtwork... Error writing Bootloader 05.01.2019 17:07:41 Writing device finished - INCOMPLETE any idea on how to solve that?

01-29-2019, 12:16	#68 (permalink)
smp_comms Insane Poster Join Date: Nov 2002 Age: 42 Posts: 83 Member: 17415 Status: Offline Thanks Meter: 12	mate 20 lite SNE-LX1 Demo remove possible? Tried writing OEMINFO SNE-L01 but fails

01-30-2019, 11:50	#73 (permalink)
rebainoor No Life Poster Join Date: Feb 2006 Location: In my LAB Posts: 3,162 Member: 231728 Status: Offline Thanks Meter: 2,102	Please add Erase any partition to soft in HUAWEI COM1.0 mode (custom erase partition)