HCU-Client - Huawei flasher, Mate 10 Imei repair added - Page 4 - GSM-Forum

**Arve** · 12-06-2017, 23:34

Quote:

Originally Posted by krzychunh

Look, change imei in Manufacture mode run factory reset, press *#06# imei has changed, shutdown phone disconnect usb kable, press vol - connect to pc, and read imei in HCU "Read phone info" imei is old but in android is new imei o.0

in fact, the imei number is not changed, after version 174 problems started, I wrote with your support, I got a range betatester but it has not been repaired

Follow factory you need rewrite firmware after any rework, but you can solve this by press factory reset manually. And there not a fact not repaired, just no factory reset .

**Arve** · 12-07-2017, 00:13

Also before this version (about 174) hcu has wrong reset method (not as factory) and failing (if huawei account in phone, vendor country wrong or other reasons) for many users. Now HCU Huawei repair is same as factory.
Can i know any other problems ?

krzychunh · 12-07-2017, 09:35

I repeat the phone has been restored to factory settings, uploading new software does not improve anything, the problem still occurs, this is the HCU problem. I've tested on 20 phones with android 7

krzychunh · 12-07-2017, 09:37

Phone after loading imei sam restore the factory settings, manually also tried the problem remains in fastboot imei is old but in the android is changed

imei should be completely changed and he only overlaps

Sparkrite · 12-07-2017, 14:00

Quote:

Originally Posted by krzychunh

Install... (Link removed, not enough posts)

Thank you, but I have installed and uninstalled EVERY VB C++ from 2005-2017
but still the same error !! “The application was unable to start correctly (0xc0150002), Click OK to close the application.”

Its doing my head in especially that it runs on my old XP machine.

Namelocked · 12-07-2017, 14:32

Quote:

Originally Posted by Sparkrite

Thank you, but I have installed and uninstalled EVERY VB C++ from 2005-2017
but still the same error !! “The application was unable to start correctly (0xc0150002), Click OK to close the application.”

Its doing my head in especially that it runs on my old XP machine.

How about this one https://www.microsoft.com/en-us/down...ion.aspx?id=29

krzychunh · 12-07-2017, 14:57

Quote:

Originally Posted by Sparkrite

Thank you, but I have installed and uninstalled EVERY VB C++ from 2005-2017
but still the same error !! “The application was unable to start correctly (0xc0150002), Click OK to close the application.”

Its doing my head in especially that it runs on my old XP machine.

install "c++ 2008 redistributable x86" "c++ 2008 redistributable x64" "you need install 2008 version"

Sparkrite · 12-07-2017, 15:11

Quote:

Originally Posted by krzychunh

install "c++ 2008 redistributable x86" "c++ 2008 redistributable x64" "you need install 2008 version"

Success! Thank you very much. Both Namelocked and krzychunh.

That is strange but your link is the exact same file as krzychunh linked me to, but I uninstalled his and installed yours and it works, don't know how but it does.
BTW. I still have to disable "Win. Defender" as it complains about HCU containing a trojan.

Also for some reason I lost 3 credits even though I did nothing, perhaps Namelocked could look at this for me, please?
I can supply the log if needed.
Again thank you to you both.
Cheers.

Namelocked · 12-07-2017, 15:56

Quote:

Originally Posted by krzychunh

Look, change imei in Manufacture mode run factory reset, press *#06# imei has changed, shutdown phone disconnect usb kable, press vol - connect to pc, and read imei in HCU "Read phone info" imei is old but in android is new imei o.0

in fact, the imei number is not changed, after version 174 problems started, I wrote with your support, I got a range betatester but it has not been repaired

Detection before repair on HCU

Repairing new IMEIs:

Top info before repair, bottom - after repair and reset:

Quote:

Originally Posted by Sparkrite

Success! Thank you very much. Both Namelocked and krzychunh.

That is strange but your link is the exact same file as krzychunh linked me to, but I uninstalled his and installed yours and it works, don't know how but it does.
BTW. I still have to disable "Win. Defender" as it complains about HCU containing a trojan.

Also for some reason I lost 3 credits even though I did nothing, perhaps Namelocked could look at this for me, please?
I can supply the log if needed.
Again thank you to you both.
Cheers.

If you let me know your username i will check.

Sparkrite · 12-07-2017, 16:05

Thanks Namelocked, my username is Sparkrite.

TIA.

Namelocked · 12-07-2017, 16:07

Quote:

Originally Posted by Sparkrite

Thanks Namelocked, my username is Sparkrite.

TIA.

Credits now added back to your account.

Sparkrite · 12-07-2017, 16:16

Quote:

Originally Posted by Namelocked

Credits now added back to your account.

Excellent. Thank you.

krzychunh · 12-07-2017, 22:43

Quote:

Originally Posted by Namelocked

Detection before repair on HCU

Repairing new IMEIs:

Top info before repair, bottom - after repair and reset:

If you let me know your username i will check.

Its ok Android 6 but Android 7 problem look youtube

https://www.youtube.com/watch?v=w5al...ture=*********

krzychunh · 12-11-2017, 11:11

is it already known what is the cause ?, does not HCU support Android 7?

krzychunh · 12-12-2017, 16:24

It is not possible to repair the IMEI number on Android 7.

Imei is changed in the android system, but this is an overlay only, because in the fastboot command there is an old IMEI and there is no possibility to change

https://www.youtube.com/watch?v=w5al...ture=*********

12-12-2017, 16:24	#60 (permalink)
krzychunh Freak Poster Join Date: Feb 2013 Location: Polska Posts: 162 Member: 1881160 Status: Offline Thanks Meter: 31	HCU - problem Android 7 It is not possible to repair the IMEI number on Android 7. Imei is changed in the android system, but this is an overlay only, because in the fastboot command there is an old IMEI and there is no possibility to change https://www.youtube.com/watch?v=w5al...ture=*********

12-07-2017, 00:13	#47 (permalink)
Arve selective member DC - Unlocker Join Date: Feb 2001 Location: Lithuania Posts: 654 Member: 3431 Status: Offline Thanks Meter: 12,477	Also before this version (about 174) hcu has wrong reset method (not as factory) and failing (if huawei account in phone, vendor country wrong or other reasons) for many users. Now HCU Huawei repair is same as factory. Can i know any other problems ?

12-07-2017, 09:35	#48 (permalink)
krzychunh Freak Poster Join Date: Feb 2013 Location: Polska Posts: 162 Member: 1881160 Status: Offline Thanks Meter: 31	I repeat the phone has been restored to factory settings, uploading new software does not improve anything, the problem still occurs, this is the HCU problem. I've tested on 20 phones with android 7

12-07-2017, 09:37	#49 (permalink)
krzychunh Freak Poster Join Date: Feb 2013 Location: Polska Posts: 162 Member: 1881160 Status: Offline Thanks Meter: 31	Phone after loading imei sam restore the factory settings, manually also tried the problem remains in fastboot imei is old but in the android is changed imei should be completely changed and he only overlaps

12-07-2017, 16:05	#55 (permalink)
Sparkrite Junior Member Join Date: Dec 2013 Posts: 16 Member: 2094323 Status: Offline Thanks Meter: 0	Thanks Namelocked, my username is Sparkrite. TIA.

12-11-2017, 11:11	#59 (permalink)
krzychunh Freak Poster Join Date: Feb 2013 Location: Polska Posts: 162 Member: 1881160 Status: Offline Thanks Meter: 31	is it already known what is the cause ?, does not HCU support Android 7?