Honour 6X BLN-L21 IMEI WRITE FAIL - GSM-Forum

ahmadge · 08-04-2018, 13:07

HERE LOGO

Code:

2018-08-04 15:34:52.087 Read from server...
2018-08-04 15:34:52.752 Read from server success!
2018-08-04 15:34:53.259 Phone secure identify start
2018-08-04 15:34:53.867 Phone secure identify fail!
2018-08-04 15:34:53.879 Writing IMEI 1 start
2018-08-04 15:34:53.890 Phone secure identify start
2018-08-04 15:34:53.971 Phone secure identify fail!
2018-08-04 15:34:53.983 Writing public keys...
2018-08-04 15:34:58.236 Write public keys fail!
2018-08-04 15:34:58.249 Write IMEI  fail! AT command error
2018-08-04 15:34:58.261 Write SIMCARD mode not supported for this model, skipped!
2018-08-04 15:34:58.272 Synchronize NV...
2018-08-04 15:34:58.797 Synchronize NV success!
2018-08-04 15:34:58.809 Factory reset...
2018-08-04 15:35:01.340 Factory reset success!
2018-08-04 15:35:01.354 Finished!

{Ahmadge}

Namelocked · 08-06-2018, 08:04

What firmware it runs please? And what's your username for HCU

ahmadge · 08-06-2018, 08:16

Username imranmalik777
Berlin-L21_Berlin-L23_Berlin-L22_MBD001031_Board Software_general_05021YGY
firmwere Berlin-L21HN_C185B140_Firmware_Pakistan_Nonspecific_Andro id6.0_EMUI4.1.3
i use these firmwere first board soft then update other file

Namelocked · 08-06-2018, 08:29

You are doing repair as empty board?

ahmadge · 08-06-2018, 08:32

yes same problem....

08-06-2018, 08:04	#2 (permalink)
Namelocked Product Supporter Join Date: Sep 2013 Location: Lithuania, Kaunas Posts: 4,690 Member: 2023196 Status: Offline Thanks Meter: 1,891	What firmware it runs please? And what's your username for HCU

08-06-2018, 08:16	#3 (permalink)
ahmadge No Life Poster Join Date: Oct 2007 Location: Unknown Posts: 1,020 Member: 603971 Status: Offline Thanks Meter: 730	Username imranmalik777 Berlin-L21_Berlin-L23_Berlin-L22_MBD001031_Board Software_general_05021YGY firmwere Berlin-L21HN_C185B140_Firmware_Pakistan_Nonspecific_Andro id6.0_EMUI4.1.3 i use these firmwere first board soft then update other file

08-06-2018, 08:29	#4 (permalink)
Namelocked Product Supporter Join Date: Sep 2013 Location: Lithuania, Kaunas Posts: 4,690 Member: 2023196 Status: Offline Thanks Meter: 1,891	You are doing repair as empty board?

08-06-2018, 08:32	#5 (permalink)
ahmadge No Life Poster Join Date: Oct 2007 Location: Unknown Posts: 1,020 Member: 603971 Status: Offline Thanks Meter: 730	yes same problem....