Huawei Mate 9 dead
 

Phone has died later flashing Dc-Unlocker :(
I didn't know and have stitched the version below, I had 8
Now phone enters where if on it the decision? testpoint&:confused:

Very hard to understand anything from it. DC-phoenix repair solutions and all possible methods listed here: https://www.dc-unlocker.com/DC-Phoen...epair-tutorial

I need board testoint :(

I really wonder that if you can enter huawei usb com 1.0 mode. Because driver is not signed via Huawei and you need to deactivate windows driver signature validation function. Even you make it probably you won't be able to.

I also have a hard bricked Mate 9 Pro. I have testpoint driver. I think you should look HDE Tool for. Nick owner of "HUA Supporter" really helpful about. You can mention about me also.

But if you handle Huawei usb com 1.0 thing please explain it for me.

that's just the point that I don't have this mode

I tried many times to install it. But windows is not installing it because of security policy about unsigned driver file.
I deactivate driver signature enforcement function and now I see Huawei usb com 1.0 but it seems not working. I think need check if it's working with a tool software.

Sadly we do not have testpoints for this mode.
If phone is visible in this mode then you should be able to flash factory firmware/board software into it.

as you have got huawei usb com 1.0

I have found test point, have stitched it, but there was no SN and also imei, everything was restored, and now at the working phone
Thanks to all
P.S. Dc its best!