Huawei Mate 9 dead - GSM-Forum

solgeo · 01-11-2018, 17:51

Phone has died later flashing Dc-Unlocker

I didn't know and have stitched the version below, I had 8
Now phone enters where if on it the decision? testpoint&

Namelocked · 01-12-2018, 09:51

Quote:

Originally Posted by solgeo

Phone has died later flashing Dc-Unlocker

I didn't know and have stitched the version below, I had 8
Now phone enters where if on it the decision? testpoint&

Very hard to understand anything from it. DC-phoenix repair solutions and all possible methods listed here: https://www.dc-unlocker.com/DC-Phoen...epair-tutorial

solgeo · 01-13-2018, 12:55

Quote:

Originally Posted by Namelocked

Very hard to understand anything from it. DC-phoenix repair solutions and all possible methods listed here: https://www.dc-unlocker.com/DC-Phoen...epair-tutorial

I need board testoint

livevalue · 01-14-2018, 12:55

Quote:

Originally Posted by solgeo

I need board testoint

I really wonder that if you can enter huawei usb com 1.0 mode. Because driver is not signed via Huawei and you need to deactivate windows driver signature validation function. Even you make it probably you won't be able to.

I also have a hard bricked Mate 9 Pro. I have testpoint driver. I think you should look HDE Tool for. Nick owner of "HUA Supporter" really helpful about. You can mention about me also.

But if you handle Huawei usb com 1.0 thing please explain it for me.

solgeo · 01-15-2018, 08:28

Quote:

Originally Posted by livevalue

I really wonder that if you can enter huawei usb com 1.0 mode. Because driver is not signed via Huawei and you need to deactivate windows driver signature validation function. Even you make it probably you won't be able to.

I also have a hard bricked Mate 9 Pro. I have testpoint driver. I think you should look HDE Tool for. Nick owner of "HUA Supporter" really helpful about. You can mention about me also.

But if you handle Huawei usb com 1.0 thing please explain it for me.

that's just the point that I don't have this mode

livevalue · 01-15-2018, 09:16

Quote:

Originally Posted by solgeo

that's just the point that I don't have this mode

I tried many times to install it. But windows is not installing it because of security policy about unsigned driver file.
I deactivate driver signature enforcement function and now I see Huawei usb com 1.0 but it seems not working. I think need check if it's working with a tool software.

Namelocked · 01-15-2018, 09:47

Quote:

Originally Posted by solgeo

I need board testoint

Sadly we do not have testpoints for this mode.

Quote:

Originally Posted by livevalue

I tried many times to install it. But windows is not installing it because of security policy about unsigned driver file.
I deactivate driver signature enforcement function and now I see Huawei usb com 1.0 but it seems not working. I think need check if it's working with a tool software.

If phone is visible in this mode then you should be able to flash factory firmware/board software into it.

solgeo · 01-15-2018, 14:24

Quote:

Originally Posted by livevalue

I tried many times to install it. But windows is not installing it because of security policy about unsigned driver file.
I deactivate driver signature enforcement function and now I see Huawei usb com 1.0 but it seems not working. I think need check if it's working with a tool software.

as you have got huawei usb com 1.0

solgeo · 01-29-2018, 16:16

I have found test point, have stitched it, but there was no SN and also imei, everything was restored, and now at the working phone
Thanks to all
P.S. Dc its best!

01-11-2018, 17:51	#1 (permalink)
solgeo No Life Poster Join Date: Nov 2017 Location: Russian Posts: 849 Member: 2778414 Status: Offline Thanks Meter: 342	Huawei Mate 9 dead Phone has died later flashing Dc-Unlocker I didn't know and have stitched the version below, I had 8 Now phone enters where if on it the decision? testpoint&

01-29-2018, 16:16	#9 (permalink)
solgeo No Life Poster Join Date: Nov 2017 Location: Russian Posts: 849 Member: 2778414 Status: Offline Thanks Meter: 342	I have found test point, have stitched it, but there was no SN and also imei, everything was restored, and now at the working phone Thanks to all P.S. Dc its best!