I need to get p10 plus testpoint picture - GSM-Forum

wangdub · 04-20-2018, 08:53

P10 plus testpoint picture pls

MiRoOo · 04-20-2018, 08:59

Here you go:

Sent from my iPhone using Tapatalk

wangdub · 04-22-2018, 16:26

4/22/2018 4:22:25 PM Starting to write device in FASTBOOT mode...
File to update: Vicky-AL00A_HLVKYAL00M00A038_Board Software_inc_testpoint.dgtks
Device detected:
COM29: HUAWEI USB COM 1.0 (COM29)

Writing bootloader...
Writing Vicky-AL00A_HLVKYAL00M00A038_Board Software_inc_testpoint_4.dtwork...
Writing Vicky-AL00A_HLVKYAL00M00A038_Board Software_inc_testpoint_5.dtwork...
Writing Vicky-AL00A_HLVKYAL00M00A038_Board Software_inc_testpoint_6.dtwork...

Waiting for fastboot device...
No devices detected in fastboot mode
Error detecting device in fastboot mode
4/22/2018 4:23:38 PM Writing device finished OK

Namelocked · 04-23-2018, 09:54

Then you should consider that hardware is beyond repair with software.

wangdub · 04-23-2018, 21:00

the phone worked fine till i tried to flash it,it is not hardware problem at all

wangdub · 04-23-2018, 23:16

While flashing P10 plus it gave this error :

Software written
PM Writing device finished - INCOMPLETE
Cannot reboot to bootloader

Cannot update device in upgrade mode

Namelocked · 04-24-2018, 07:52

If board software was not flashed successfully there is nothing else really.

wangdub · 04-24-2018, 08:38

the phone was with demo software,i folowed the instruction for flashing correcly,is there anything at all that can be done??

Namelocked · 04-24-2018, 10:52

If device enters fastboot could try to flash same stock demo firmware that originally was in device before you broke it.

wangdub · 04-24-2018, 21:48

is there anything else that i can try before i buy a new phone for the customer and i give up on this phone killing tool for good???

Namelocked · 04-25-2018, 07:52

Only things that i mentioned above.

wangdub · 04-25-2018, 09:53

any idea how can people avoid damaging phones with this tool,everything i did was folowing the manual

Namelocked · 04-25-2018, 11:39

People use this tool only when phone is already damaged, so it makes no sense what you wrote. In general people break phones when they try to repair it by flashing their ota/full ota update.app files that make many phones go blank dead. RAM/Flash parts may be done after that. You can avoid damaging phone by using correct files or not using anything and not doing anything, but replacing main board on mobile instead, if one is lacking knowledge on flashing.

rexmike · 02-06-2020, 10:50

please i need vky-l29 test point

solgeo · 02-06-2020, 13:54

Quote:

Originally Posted by rexmike

please i need vky-l29 test point

http://forum.gsmhosting.com/vbb/13089802-post2.html

04-20-2018, 08:53	#1 (permalink)
wangdub Freak Poster Join Date: Jul 2011 Posts: 112 Member: 1620809 Status: Offline Thanks Meter: 7	I need to get p10 plus testpoint picture P10 plus testpoint picture pls

04-22-2018, 16:26	#3 (permalink)
wangdub Freak Poster Join Date: Jul 2011 Posts: 112 Member: 1620809 Status: Offline Thanks Meter: 7	Still dead 4/22/2018 4:22:25 PM Starting to write device in FASTBOOT mode... File to update: Vicky-AL00A_HLVKYAL00M00A038_Board Software_inc_testpoint.dgtks Device detected: COM29: HUAWEI USB COM 1.0 (COM29) Writing bootloader... Writing Vicky-AL00A_HLVKYAL00M00A038_Board Software_inc_testpoint_4.dtwork... Writing Vicky-AL00A_HLVKYAL00M00A038_Board Software_inc_testpoint_5.dtwork... Writing Vicky-AL00A_HLVKYAL00M00A038_Board Software_inc_testpoint_6.dtwork... Waiting for fastboot device... No devices detected in fastboot mode Error detecting device in fastboot mode 4/22/2018 4:23:38 PM Writing device finished OK

04-20-2018, 08:59	#2 (permalink)
MiRoOo No Life Poster Join Date: Sep 2007 Location: Gizah/Egypt Age: 33 Posts: 660 Member: 594436 Status: Offline Sonork: 100.1657777 Thanks Meter: 952	Here you go: Sent from my iPhone using Tapatalk

04-23-2018, 09:54	#4 (permalink)
Namelocked Product Supporter Join Date: Sep 2013 Location: Lithuania, Kaunas Posts: 4,690 Member: 2023196 Status: Offline Thanks Meter: 1,891	Then you should consider that hardware is beyond repair with software.

04-23-2018, 21:00	#5 (permalink)
wangdub Freak Poster Join Date: Jul 2011 Posts: 112 Member: 1620809 Status: Offline Thanks Meter: 7	the phone worked fine till i tried to flash it,it is not hardware problem at all

04-23-2018, 23:16	#6 (permalink)
wangdub Freak Poster Join Date: Jul 2011 Posts: 112 Member: 1620809 Status: Offline Thanks Meter: 7	While flashing P10 plus it gave this error : Software written PM Writing device finished - INCOMPLETE Cannot reboot to bootloader Cannot update device in upgrade mode

04-24-2018, 07:52	#7 (permalink)
Namelocked Product Supporter Join Date: Sep 2013 Location: Lithuania, Kaunas Posts: 4,690 Member: 2023196 Status: Offline Thanks Meter: 1,891	If board software was not flashed successfully there is nothing else really.

04-24-2018, 08:38	#8 (permalink)
wangdub Freak Poster Join Date: Jul 2011 Posts: 112 Member: 1620809 Status: Offline Thanks Meter: 7	the phone was with demo software,i folowed the instruction for flashing correcly,is there anything at all that can be done??

04-24-2018, 10:52	#9 (permalink)
Namelocked Product Supporter Join Date: Sep 2013 Location: Lithuania, Kaunas Posts: 4,690 Member: 2023196 Status: Offline Thanks Meter: 1,891	If device enters fastboot could try to flash same stock demo firmware that originally was in device before you broke it.

04-24-2018, 21:48	#10 (permalink)
wangdub Freak Poster Join Date: Jul 2011 Posts: 112 Member: 1620809 Status: Offline Thanks Meter: 7	is there anything else that i can try before i buy a new phone for the customer and i give up on this phone killing tool for good???

04-25-2018, 07:52	#11 (permalink)
Namelocked Product Supporter Join Date: Sep 2013 Location: Lithuania, Kaunas Posts: 4,690 Member: 2023196 Status: Offline Thanks Meter: 1,891	Only things that i mentioned above.

04-25-2018, 09:53	#12 (permalink)
wangdub Freak Poster Join Date: Jul 2011 Posts: 112 Member: 1620809 Status: Offline Thanks Meter: 7	any idea how can people avoid damaging phones with this tool,everything i did was folowing the manual

04-25-2018, 11:39	#13 (permalink)
Namelocked Product Supporter Join Date: Sep 2013 Location: Lithuania, Kaunas Posts: 4,690 Member: 2023196 Status: Offline Thanks Meter: 1,891	People use this tool only when phone is already damaged, so it makes no sense what you wrote. In general people break phones when they try to repair it by flashing their ota/full ota update.app files that make many phones go blank dead. RAM/Flash parts may be done after that. You can avoid damaging phone by using correct files or not using anything and not doing anything, but replacing main board on mobile instead, if one is lacking knowledge on flashing.

02-06-2020, 10:50	#14 (permalink)
rexmike Freak Poster Join Date: Aug 2014 Location: Nigeria Lagos Posts: 104 Member: 2243791 Status: Offline Thanks Meter: 9	please i need vky-l29 test point