GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   DC Unlocker (https://forum.gsmhosting.com/vbb/f1004/)
-   -   Need Supporter or member Help before i proceed. Thanks (https://forum.gsmhosting.com/vbb/f1004/need-supporter-member-help-before-i-proceed-thanks-2705089/)

gsmcoder78 10-08-2019 18:40
Need Supporter or member Help before i proceed. Thanks
 
Actually i had MHA-AL00 BootLoop
Successfully Recovered with Board Software
Huawei Mate 9 MHA-AL00 HLMHAAL00AM00A069 Board Software China Android 7.0 EMUI 5.0

Now there is IMEI Damaged 00000000 after trying SD Upgrade it will fail, i think is due IMEI problem...so, i cant flash official firmware.

On Supported model list Supported Huawei models & features i saw that IMEI repair is aviable.

Question,
Can we repair IMEI on Board Software ?
Does SD Upgrade fail because of IMEI 000xxxxxx ?


Thanks in Advance

Namelocked 10-09-2019 11:24
Yes you can repair IMEI and rest of data on HCU after board software flash. Depends on error, most likely it's version mismatch - incorrect model/vendor/country.

gsmcoder78 10-10-2019 20:44
Quote:
Originally Posted by Namelocked (Post 13854435)
Yes you can repair IMEI and rest of data on HCU after board software flash. Depends on error, most likely it's version mismatch - incorrect model/vendor/country.
Before i start this is Read info From HCU

Quote:
10/10/2019 9:38:31 PM
HCU Client v1.0.0.0348

2019-10-10 21:38:35.640 Autodetect COM port and phone type start!
2019-10-10 21:38:38.458 Found COM port: COM7
2019-10-10 21:38:38.463 Found phone type: Huawei Android phone (HiSilicon CPU)
2019-10-10 21:38:38.466 Open COM port COM7 (Android Adapter PCUI (COM7))...
2019-10-10 21:38:38.600 Start read phone info!
2019-10-10 21:38:38.805 CP State: ready
2019-10-10 21:38:38.812 Read phone basic info...
2019-10-10 21:38:40.216 Read phone secure info...
2019-10-10 21:38:46.067 Read phone info done!

MEID: A000006D8829EA
pESN: 809BB2D1
IMEI: 864368036938096
IMEI2: 864368037052905
IMEI3: 864368037573314
Firmware ver.: HLMHAAL00AM00A069
Dataver: (unknow)
SN: 3HX5T17111059523
PCB SN: 5T4BJB171E001839
WiFi MAC: 50:01:D9:B9:14:C1
BlueTooth MAC: 50:01:D9:B8:8A:9D
FASTBOOT:HLMHAAL00AM00A069_FASTBOOT
BOOT:HLMHAAL00AM00A069_BOOT
RECOVERY:(unknow)
SYSTEM:HLMHAAL00AM00A069_SYSIMG
MAINVER:HLMHAAL00AM00A069
DATAVER:(unknow)
APTIME:Tue Jun 6 03:40:23 CST 2017
RAM: 4G
eMMC: 64G
eMMC ID: 00000000000000000000000000000000
HUN: 0000000000000000


2019-10-10 21:38:46.140 Phone info data backup saved to file D:\Huawei\HCU-Client\Backup\20191010_213846_864368036938096.BAK
IMEI is OK at Read Info but on Phone *#06# will display

https://i.postimg.cc/7ZkM3wdQ/Fast-Stone-Editor2.png

Concerned about this from Log

eMMC ID: 00000000000000000000000000000000
HUN: 0000000000000000

Should i proceed with IMEI repair ?
Phone is on board software and it cant be updated via SD Card

Thanks in advance

Namelocked 10-11-2019 14:48
Yes, can proceed. Do not expect phone to behave normally on board software.


All times are GMT +1. The time now is 09:36.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.08994 seconds with 6 queries

SEO by vBSEO