P10 VTR-L09 Hard Bricked

[orx]

Hello this is my experience with total brick of this phone .

after to have flashed firmware vtr-l09 with another tool my phone goes dead , no pc detect , no power , NO boot image , no fastboot.
I purchase dc phoenix + hcu client packet 2 days and notice that for hard brick model VTR-L09 no is supported .

done test point and flash firmware with DcPhoenix for model VTR-AL00 but obviously an error at the end of the flash procedure .
Reflash correct firmware because now i've possibility to enter in fastboot mode.
Unfortunally at the end of procedure no imei and strangely requires nck code.
Run Hcu client enter correct imei and unlock and finally solve.

dc pho.1.JPG

dc pho.2.JPG

[AbdallahAyoub]

Originally Posted by orx

Hello this is my experience with total brick of this phone .

after to have flashed firmware vtr-l09 with another tool my phone goes dead , no pc detect , no power , NO boot image , no fastboot.
I purchase dc phoenix + hcu client packet 2 days and notice that for hard brick model VTR-L09 no is supported .

done test point and flash firmware with DcPhoenix for model VTR-AL00 but obviously an error at the end of the flash procedure .
Reflash correct firmware because now i've possibility to enter in fastboot mode.
Unfortunally at the end of procedure no imei and strangely requires nck code.
Run Hcu client enter correct imei and unlock and finally solve.

Attachment 368761

Attachment 368762

Can you share test point plz

[jmr]

Originally Posted by orx

Hello this is my experience with total brick of this phone .

after to have flashed firmware vtr-l09 with another tool my phone goes dead , no pc detect , no power , NO boot image , no fastboot.
I purchase dc phoenix + hcu client packet 2 days and notice that for hard brick model VTR-L09 no is supported .

done test point and flash firmware with DcPhoenix for model VTR-AL00 but obviously an error at the end of the flash procedure .
Reflash correct firmware because now i've possibility to enter in fastboot mode.
Unfortunally at the end of procedure no imei and strangely requires nck code.
Run Hcu client enter correct imei and unlock and finally solve.



Attachment 368761

Attachment 368762

this not work for patch new, try this method for repair vtr-l09 patch 1 dec and always error try write board software

[blackie06]

new kirn 960 t2 a7.0 v3 fake repair

I made my phone trash and said they were not a group of dc unlocker

http://forum.gsmhosting.com/vbb/f100...easee-2552335/