VTR-L09 [P10] Need To Change Vendor, After Update OEMINFO, Doesn't Get Upgrade Mode
 

VTR-L09 [P10] Need To Change Vendor / Country After Update OEMINFO, Doesn't detected Upgrade Mode whats wrong, even cant flash the running firmware which version has inside already.

https://i.ibb.co/Jr8FdnQ/0.png
https://i.ibb.co/v3NXT8x/1.png
https://i.ibb.co/vYXJR7b/2.png

To change vendro/country use HCU... If phone does not enter upgrade mode automatically then put it into it manually.

Dear sir,

please look in this thread, http://forum.gsmhosting.com/vbb/f272...lowed-2549462/ but after write OEMINFO, Doesn't Get Upgrade Mode, now phone is brick didn't tack write any firmware.

please suggest me, how to recover this phone is working condition.

For me if i have this error i do other method:
I flash full board firmware with erase all
And After phone run with board firmware I flash it with any firmware with customization file and After flash success you will get all information empty
Finaly repaire all needed part with the same flashed firmware (IMEI: model:vendor: région...)

PS: you need choise only supported firmware version by HCU

now not detected fast boot mode by Vol- button, only detected after write OEMINFO via TP, even now no light no LCD set PCB get too much hot.



Looking for a device in force upgrade mode
No devices detected in force upgrade mode
Device found: 6PQ0217418004751


3/2/2019 2:54:02 PM Starting to write device in FASTBOOT mode...
File to update: VTRAL00M00A047_Board Software_China_Nonspecific_Android 7.0_EMUI5.1_05022AVG._inc_testpoint.dgtks

Looking for a device in fastboot mode
Device found: 6PQ0217418004751

SN:6PQ0217418004751
IMEI:862789030271378

IMEI1:862789030271378

MEID:86278903027137
Build number: :VTR-L09C440B112
Model: VTR-L09
Battery state: 0


Erasing nvme partition
ERASE partition nvme : FAIL failed to erase partition
Cannot get FBlock info from device
Trying to unlock device...
Erasing nvme partition
ERASE partition nvme : FAIL failed to erase partition

Erasing oeminfo partition
ERASE partition oeminfo : FAIL failed to erase partition

Erasing modemnvm_backup partition
ERASE partition modemnvm_backup : FAIL failed to erase partition

Erasing modemnvm_factory partition
ERASE partition modemnvm_factory : FAIL failed to erase partition

Erasing modemnvm_system partition
ERASE partition modemnvm_system : FAIL failed to erase partition

Erasing cust partition
ERASE partition cust : FAIL failed to erase partition

Erasing version partition
ERASE partition version : FAIL failed to erase partition

Erasing misc partition
ERASE partition misc : FAIL failed to erase partition

Erasing userdata partition
ERASE partition userdata : FAIL failed to erase partition

Writing xloader partition
xloader partition UPDATE :FAIL image xloader1 verification error

Writing ptable partition
ptable partition UPDATE ...OK

Writing fastboot partition
fastboot partition UPDATE :FAIL image verification error

Writing vector partition
vector partition UPDATE :FAIL image verification error

Writing dts partition
dts partition UPDATE ...OK

Writing fw_lpm3 partition
fw_lpm3 partition UPDATE :FAIL image verification error

Writing sensorhub partition
sensorhub partition UPDATE :FAIL image verification error

Writing fw_hifi partition
fw_hifi partition UPDATE :FAIL image verification error

Writing teeos partition
teeos partition UPDATE :FAIL image verification error

Writing recovery partition
recovery partition UPDATE ...OK

Erasing cache partition
Partition cache erased
Writing cache partition
cache partition UPDATE ...OK

Writing boot partition
boot partition UPDATE ...OK

Writing nvme partition
nvme partition UPDATE ...OK

Writing trustfirmware partition
trustfirmware partition UPDATE :FAIL image verification error

Writing modem_fw partition
modem_fw partition UPDATE :FAIL image verification error

Writing modemnvm_update partition
modemnvm_update partition UPDATE ...OK

Writing modem_om partition
modem_om partition UPDATE ...OK

Writing modemnvm_img partition
modemnvm_img partition UPDATE ...OK

Writing isp_firmware partition
isp_firmware partition UPDATE :FAIL image verification error

Erasing userdata partition
Partition userdata erased
Writing userdata partition
userdata partition UPDATE ...OK

Writing system partition
sending sparse file 469762048 bytes
send sparse file OK
sending sparse file 469762048 bytes
send sparse file OK
sending sparse file 452617196 bytes
send sparse file OK
system partition UPDATE ...OK

Writing version partition
version partition UPDATE ...OK

Writing splash2 partition
splash2 partition UPDATE ...OK

Writing frp partition
frp partition UPDATE ...OK

Writing oeminfo partition
oeminfo partition UPDATE ...OK

Writing secure_storage partition
secure_storage partition UPDATE ...OK

Writing modem_secure partition
modem_secure partition UPDATE ...OK

Writing hisee_img partition
hisee_img partition UPDATE ...OK

Writing hisee_fs partition
hisee_fs partition UPDATE ...OK

Writing reserved4 partition
reserved4 partition UPDATE ...OK

Writing ufs_fw partition
ufs_fw partition UPDATE ...OK


Software written

3/2/2019 3:01:12 PM Writing device finished - INCOMPLETE










Looking for a device in upgrade mode
No devices detected in upgrade mode
Device found: 6PQ0217418004751


3/2/2019 3:13:28 PM Starting to write device in FASTBOOT mode...
Current version: VTR_C900_EMUI8.0_xloader


Looking for a device in fastboot mode
Device found: 6PQ0217418004751

SN:6PQ0217418004751
Battery state: 0


Writing XLOADER partition
XLOADER partition UPDATE ...OK

Writing FW_LPM3 partition
FW_LPM3 partition UPDATE ...OK

Writing FASTBOOT partition
FASTBOOT partition UPDATE ...OK

Writing VECTOR partition
VECTOR partition UPDATE ...OK

Writing VBMETA partition
VBMETA partition UPDATE :FAIL partition length get error
Cannot get FBlock info from device
Trying to unlock device...
Writing VBMETA partition
VBMETA partition UPDATE :FAIL partition length get error

Writing MODEMNVM_UPDATE partition
MODEMNVM_UPDATE partition UPDATE ...OK

Writing TEEOS partition
TEEOS partition UPDATE ...OK

Writing TRUSTFIRMWARE partition
TRUSTFIRMWARE partition UPDATE ...OK

Writing SENSORHUB partition
SENSORHUB partition UPDATE ...OK

Writing FW_HIFI partition
FW_HIFI partition UPDATE ...OK

Writing DTS partition
DTS partition UPDATE ...OK

Writing KERNEL partition
KERNEL partition UPDATE :FAIL partition length get error

Writing RECOVERY_RAMDISK partition
RECOVERY_RAMDISK partition UPDATE :FAIL partition length get error

Writing RECOVERY_VENDOR partition
RECOVERY_VENDOR partition UPDATE :FAIL partition length get error

Writing RECOVERY_VBMETA partition
RECOVERY_VBMETA partition UPDATE :FAIL partition length get error

Writing ERECOVERY_KERNEL partition
ERECOVERY_KERNEL partition UPDATE :FAIL partition length get error

Writing ERECOVERY_RAMDISK partition
ERECOVERY_RAMDISK partition UPDATE :FAIL partition length get error

Writing ERECOVERY_VENDOR partition
ERECOVERY_VENDOR partition UPDATE :FAIL partition length get error

Writing ERECOVERY_VBMETA partition
ERECOVERY_VBMETA partition UPDATE :FAIL partition length get error

Writing RAMDISK partition
RAMDISK partition UPDATE :FAIL partition length get error

Erasing CACHE partition
Partition CACHE erased
Writing CACHE partition
CACHE partition UPDATE ...OK

Writing SYSTEM partition
sending sparse file 469762048 bytes
send sparse file OK
sending sparse file 469762048 bytes
send sparse file OK
sending sparse file 469762048 bytes
send sparse file OK
sending sparse file 469762048 bytes
send sparse file OK
sending sparse file 469762048 bytes
send sparse file OK
sending sparse file 469762048 bytes
send sparse file OK
sending sparse file 469762048 bytes
send sparse file OK
sending sparse file 94191196 bytes
send sparse file OK
SYSTEM partition UPDATE ...OK

Erasing CUST partition
Partition CUST erased
Writing CUST partition
CUST partition UPDATE ...OK

Writing ISP_FIRMWARE partition
ISP_FIRMWARE partition UPDATE ...OK

Writing MODEM_FW partition
MODEM_FW partition UPDATE ...OK

Writing HISEE_IMG partition
HISEE_IMG partition UPDATE ...OK

Writing HISEE_FS partition
HISEE_FS partition UPDATE ...OK

Writing VERSION partition
VERSION partition UPDATE ...OK

Writing ODM partition
ODM partition UPDATE :FAIL partition length get error

Erasing USERDATA partition
Partition USERDATA erased
Writing USERDATA partition
USERDATA partition UPDATE ...OK


Software written
3/2/2019 3:18:06 PM Writing device finished - INCOMPLETE

Are you flashing EE operator GB country firmware?

I did try already OEMINFO recommended firmware, but my problem is the same https://forum.dc-unlocker.com/forum/...0-vtr-l09-dead


Also Board firmware

You do not need board software, need full stock rom and customization file.

He cant enter in upgrade mode how Can flash full firmware ? And he cant write board firmware in your support ?

Already I tried with this latest version, Huawei P10 VTR-L09 vodafone default Victoria-L09B 8.0.0.387(C02) Firmware 8.0.0 r1 EMUI8.0 05014JAS

Ok, attempt it on latest version of DC-phoenix then: https://files.dc-unlocker.com/get/75...5899b8f3502e6f no other solutions if manual entry to upgrade mode also does not work for you or you just can't execute it correctly.

dear sir,

but the phone when write done OEMINFO only that time feel vibration dosent come on dishply light but set sty with fastboot mode via device manager.

Yes, it must stay in fastboot after flashing loader+oeminfo.

still same result, no upgrade mode, not detected fast boot by V- also cant write board firmware via TP (Huawei USB 1.0 COM) the phone was completely OK but now no light, after write OEMINFO just detected only Fastboot mode but no luck.

Charge or change your battery and retry
After write bootloader with TP try to write full *.app firmware in fastboot mode if cant write regular firmware i will send you a original board firmware link to download