lcd disassembly technique for S5, A5 and new models. - GSM-Forum

idlirp · 05-21-2015, 10:57

Hi friends.
i am a little worried for the success rate of disassembling/assembling the galaxy S5 and onward generation of these phones. i am still using a heat gun and pry tools but lately i broke 2 lcds and i am looking for an easy way. i made some practice with a heating plate and temp sensor, heating the phone up to 85'C and that made it a little easy, but when i went up to 100'C to speed up the process there were some clouds formed on the lcd.
can you show me other ways please?

celltellpb · 06-07-2015, 04:55

I have the same doubts you. How do we do maintenance on these new models, and if necessary make the LCD and the risk of breaking and very large.

debeliamark · 06-07-2015, 06:51

Quote:

Originally Posted by celltellpb

I have the same doubts you. How do we do maintenance on these new models, and if necessary make the LCD and the risk of breaking and very large.

The best guide can be found at https://www.ifixit.com/Guide/Samsung...lacement/26914

AlpineMan · 06-07-2015, 16:07

That iOpener, is that a heated bean bag?

Nasir Mobiles · 06-07-2015, 19:22

Quote:

Originally Posted by AlpineMan

That iOpener, is that a heated bean bag?

here is more detail about iOpener and stories...

https://www.ifixit.com/Store/Tools/iOpener/IF145-198-6

excessive · 06-07-2015, 21:21

i have the best results by using my lcd separator machine to warm up the glass/lcd and the Yaxun YX-D02 to separate the lcd/galss from the frame

The temperature I use is 85-95 degrees.

Keep the phone facing down on the hot plate for up to 2 minutes, to let the glue warm and melt uniformly. the use the tool to SLOWLY separate the lcd/glass from the frame.
Remember that on the upper part there's the flex connected. and on the lower part you need to help the small flex to come out from the back.

These are the tools I use.

Cheers
X4ce

petiwiw · 08-11-2017, 15:13

This is my method for remove lcd

Heat for 90 degree in hot plate and follow video

muhamalak · 08-12-2017, 19:16

Here is a good solution:

05-21-2015, 10:57	#1 (permalink)
idlirp Junior Member Join Date: Apr 2014 Location: Tirana, Albania Age: 37 Posts: 24 Member: 2163928 Status: Offline Thanks Meter: 4	lcd disassembly technique for S5, A5 and new models. Hi friends. i am a little worried for the success rate of disassembling/assembling the galaxy S5 and onward generation of these phones. i am still using a heat gun and pry tools but lately i broke 2 lcds and i am looking for an easy way. i made some practice with a heating plate and temp sensor, heating the phone up to 85'C and that made it a little easy, but when i went up to 100'C to speed up the process there were some clouds formed on the lcd. can you show me other ways please?

06-07-2015, 04:55	#2 (permalink)
celltellpb No Life Poster Join Date: Jan 2008 Location: Pb - BRAZIL Posts: 640 Member: 689942 Status: Offline Thanks Meter: 312	I have the same doubts you. How do we do maintenance on these new models, and if necessary make the LCD and the risk of breaking and very large.

06-07-2015, 16:07	#4 (permalink)
AlpineMan Freak Poster Join Date: Jul 2007 Posts: 106 Member: 554699 Status: Offline Thanks Meter: 52	That iOpener, is that a heated bean bag?

06-07-2015, 21:21	#6 (permalink)
excessive No Life Poster Join Date: Mar 2005 Location: Italy, Bahrain, India Age: 53 Posts: 1,235 Member: 125037 Status: Offline Sonork: 100.1649338 Thanks Meter: 254	i have the best results by using my lcd separator machine to warm up the glass/lcd and the Yaxun YX-D02 to separate the lcd/galss from the frame The temperature I use is 85-95 degrees. Keep the phone facing down on the hot plate for up to 2 minutes, to let the glue warm and melt uniformly. the use the tool to SLOWLY separate the lcd/glass from the frame. Remember that on the upper part there's the flex connected. and on the lower part you need to help the small flex to come out from the back. These are the tools I use. Cheers X4ce

08-11-2017, 15:13	#7 (permalink)
petiwiw Freak Poster Join Date: Nov 2006 Location: any Posts: 418 Member: 391095 Status: Offline Thanks Meter: 156	This is my method for remove lcd Heat for 90 degree in hot plate and follow video

08-12-2017, 19:16	#8 (permalink)
muhamalak Freak Poster Join Date: Oct 2016 Posts: 187 Member: 2634426 Status: Offline Thanks Meter: 15	Here is a good solution: