GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   OPPO / OnePlus (https://forum.gsmhosting.com/vbb/f1009/)
-   -   oppo a1k isp pinout and pattern unlock done (https://forum.gsmhosting.com/vbb/f1009/oppo-a1k-isp-pinout-pattern-unlock-done-2652774/)

msibashankar 07-27-2019 20:40
oppo a1k isp pinout and pattern unlock done
 
oppo a1k isp pinout and pattern unlock done

oppo a1k ot realme c2 isp pinout


or video guide see it
if it help you plz subscrbe my channel

-- https://www.youtube.com/watch?v=OMekS3dekwM

Sent from my Redmi Note 5 Pro using Tapatalk
https://uploads.tapatalk-cdn.com/201...4de6e73422.jpg

boy_muslim 07-30-2019 03:09
Fake

the pinout you are given are fake

msibashankar 07-30-2019 03:13
Quote:
Originally Posted by boy_muslim (Post 13756858)
Fake

the pinout you are given are fake
see this youtube video then say . fake ya orginal

Sent from my ssm

boy_muslim 07-31-2019 05:22
Quote:
Originally Posted by msibashankar (Post 13756859)
see this youtube video then say . fake ya orginal

Sent from my ssm
ive already done with Easy Jtag but pinout are not the same as you're given

D0 and CLK

you post wrong pinout

adnanali 08-15-2019 23:24
FakePinouts+++++++++++++++++++++

msibashankar 08-16-2019 01:55
right

Sent from my Redmi Note 5 Pro using Tapatalk

HalooMa 08-16-2019 06:22
Quote:
Originally Posted by boy_muslim (Post 13758716)
ive already done with Easy Jtag but pinout are not the same as you're given



D0 and CLK



you post wrong pinout
Which operation you did??
Plz guide i have RealMe 3 RMX1821
MT6771
May be same procedure!!
Thanks

Sent from my RMX1807 using Tapatalk

ashekh04 08-27-2019 09:39
TRY THIS 100% WORKING

https://m.youtube.com/watch?feature=...&v=VTqAM1fRK5E

kit_kit 10-17-2019 11:21
Quote:
Originally Posted by ashekh04 (Post 13798050)


thanks actually pinout is correct for all . just they didnt tell vccq and vcc need to use usb as power .

shakibtha 10-27-2019 07:23
Quote:
Originally Posted by kit_kit (Post 13863569)
thanks actually pinout is correct for all . just they didnt tell vccq and vcc need to use usb as power .


Need Vccq Without Vccq Phone cannot connect After factory Reset Then Mobile is dead

shaongsm 02-03-2020 15:39
oppo A1k cph1923 resetpassword & frp done
 
Tnks z3x team & allah

Code:
eMMC CID : 150100514436334D42034D23D8D716F6
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 01/2019  Rev.0x3
eMMC NAME: QD63MB , S/N: 1294194903
eMMC NAME (HEX): 514436334D42
EMMC ROM1 (Main User Data)  Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 511 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits  , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200  bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) FRP : 0x000BE88000 (1.0MB) formatting...
Done.
Detected LINUX(Android) CACHE : 0x01A0800000 (432.0MB) , formatting...
Done.
Detected LINUX(Android) USERDATA : 0x01BB800000 (22.132GB) , formatting...
Done.
Done.
Done.

Z3X EasyJtag Software ver. 3.6.2.1
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0EFF901ADE07A5AB, ,FW Ver.: 01.63
CMD Pullup Level:2041 mV
CMD Active Level:2670 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514436334D42034D23D8D716F6
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 01/2019  Rev.0x3
eMMC NAME: QD63MB , S/N: 1294194903
eMMC NAME (HEX): 514436334D42
EMMC ROM1 (Main User Data)  Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 511 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits  , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Done.

anyasumo 06-07-2020 06:59
Quote:
Originally Posted by boy_muslim (Post 13758716)
ive already done with Easy Jtag but pinout are not the same as you're given

D0 and CLK

you post wrong pinout



Please share the Easy Jtag pinout Please. I lost DAT0 :(


All times are GMT +1. The time now is 03:16.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.16032 seconds with 6 queries

SEO by vBSEO