Tecno Spark 8C KG5j FRP REMOVE DONE

[profkefah]

PRESS AND HOLD VOLUME KEYS THEN CONNECT TO COMPUTER

1. Device must be Power off with battery inside
2. Press and Hold VOl-, or some phones requires press and hold VOl- and VOL+ together
3. Insert usb cable
4. Install spd drivers if needed
====================================

- Connection : Flash Mode
- Brand : Tecno
- Model : Tecno Spark 8C KG5j
- Process : Format | Factory Reset
====================================

Waiting for device port ...
Port found

Port : [ COM10 : SPRD U2S Diag ]

Handshaking with device ...
Handshake done
Protocol : SPRD3
Detected SoC : Unisoc Tiger T606

Sending config :  OK

Sending Boot [UAT PRO.boot1] : DONE
Sending Boot [UAT PRO.boot2] : DONE

BootVersion : Spreadtrum Boot Block version 1.1

Formatting Userdata please wait ...
Format userdata done


UAT PRO : 154.02 | 18 - تموز - 2023  [ 04:30:12 م ] Win 10  IRAQ

Elapsed Time  :  1 minutes 13 seconds


1. Device must be Power off with battery inside
2. Press and Hold VOl-, or some phones requires press and hold VOl- and VOL+ together
3. Insert usb cable
4. Install spd drivers if needed
====================================

- Connection : Flash Mode
- Brand : Tecno
- Model : Tecno Spark 8C KG5j
- Process : Reset FRP
====================================

Waiting for device port ...
Port found

Port : [ COM10 : SPRD U2S Diag ]

Handshaking with device ...
Handshake done
Protocol : SPRD3
Detected SoC : Unisoc Tiger T606

Sending config :  OK

Sending Boot [UAT PRO.boot1] : DONE
Sending Boot [UAT PRO.boot2] : DONE

BootVersion : Spreadtrum Boot Block version 1.1

Reseting Frp please wait ...
Reset Frp done


UAT PRO : 154.02 | 18 - تموز - 2023  [ 04:22:45 م ] Win 10  IRAQ

Elapsed Time  :  1 minutes 14 seconds