Huawei BG2-U01 MediaPad T3 7 frp remove done

[profkefah]

credits go to calmsystem

Welcome to Octoplus FRP Tool v.1.8.7.0
Platform: HUAWEI
Selected model: BG2-U01
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Operation was failed!
Performed by 1.8.7.0 Software version.

Platform: HUAWEI
Selected model: BG2-U01
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Operation was failed!
Performed by 1.8.7.0 Software version.

Platform: HUAWEI
Selected model: BG2-U01
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Operation was failed!
Performed by 1.8.7.0 Software version.

Platform: HUAWEI
Selected model: BG2-U01
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: BG2-U01
Phone SN: KRCS06185H002470
Phone IMEI: 869483030976623
SW version: BG2-U01C199B170
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.7.0 Software version.