Moto XT1642 FRP reset not work [Answered] - GSM-Forum

gamaservice · 10-03-2018, 13:05

hallo, Moto XT1642 not work frp reset via octoplus frp tool. PC dont see device. Any idea?

Octopus box · 10-03-2018, 13:11

Hello.

At first post here full Software log with all os performed operations with the device.

Also read and always follow these rules:
http://forum.gsmhosting.com/vbb/f103...leted-2291568/,
http://forum.gsmhosting.com/vbb/f62/...rules-1591101/.

bossko · 06-10-2019, 18:58

Welcome to Octoplus FRP Tool v.1.7.3.0
Platform: MOTOROLA
Selected model: XT1642
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone connection failed
Operation was failed!
Performed by 1.7.3.0 Software version.

Platform: MOTOROLA
Selected model: XT1642
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone connection failed
Operation was failed!
Performed by 1.7.3.0 Software version.

Platform: MOTOROLA
Selected model: XT1642
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8952.gen
Firmware released date: Nov 21 2016
Firmware released time: 17:26:00
Firmware compiled date: Nov 21 2016
Firmware compiled time: 06:00:00
SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1
Performed by 1.7.3.0 Software version.

Platform: MOTOROLA
Selected model: XT1642
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8952.gen
Firmware released date: Nov 21 2016
Firmware released time: 17:26:00
Firmware compiled date: Nov 21 2016
Firmware compiled time: 06:00:00
SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Searching for a phone (waiting for ADB device)...
Operation was failed!
Performed by 1.7.3.0 Software version.

Platform: MOTOROLA
Selected model: XT1642
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8952.gen
Firmware released date: Nov 21 2016
Firmware released time: 17:26:00
Firmware compiled date: Nov 21 2016
Firmware compiled time: 06:00:00
SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Searching for a phone (waiting for ADB device)...
Operation was failed!
Performed by 1.7.3.0 Software version.

Platform: MOTOROLA
Selected model: XT1642
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8952.gen
Firmware released date: Nov 21 2016
Firmware released time: 17:26:00
Firmware compiled date: Nov 21 2016
Firmware compiled time: 06:00:00
SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Searching for a phone (waiting for ADB device)...
Operation was failed!
Performed by 1.7.3.0 Software version.

Platform: MOTOROLA
Selected model: XT1642
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8952.gen
Firmware released date: Nov 21 2016
Firmware released time: 17:26:00
Firmware compiled date: Nov 21 2016
Firmware compiled time: 06:00:00
SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Searching for a phone (waiting for ADB device)...
Operation was failed!
Performed by 1.7.3.0 Software version.

Octopus box · 06-11-2019, 07:59

Quote:

Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button

What devices were appeared in Device manager?!

10-03-2018, 13:05	#1 (permalink)
gamaservice Junior Member Join Date: Dec 2004 Location: Dolny Kubin, Slovakia Age: 46 Posts: 12 Member: 98082 Status: Offline Thanks Meter: 0	Moto XT1642 FRP reset not work [Answered] hallo, Moto XT1642 not work frp reset via octoplus frp tool. PC dont see device. Any idea? Last edited by Octopus box; 10-03-2018 at 13:11.

10-03-2018, 13:11	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Hello. At first post here full Software log with all os performed operations with the device. Also read and always follow these rules: http://forum.gsmhosting.com/vbb/f103...leted-2291568/, http://forum.gsmhosting.com/vbb/f62/...rules-1591101/.

06-10-2019, 18:58	#3 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	Welcome to Octoplus FRP Tool v.1.7.3.0 Platform: MOTOROLA Selected model: XT1642 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone connection failed Operation was failed! Performed by 1.7.3.0 Software version. Platform: MOTOROLA Selected model: XT1642 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone connection failed Operation was failed! Performed by 1.7.3.0 Software version. Platform: MOTOROLA Selected model: XT1642 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8952.gen Firmware released date: Nov 21 2016 Firmware released time: 17:26:00 Firmware compiled date: Nov 21 2016 Firmware compiled time: 06:00:00 SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1 Performed by 1.7.3.0 Software version. Platform: MOTOROLA Selected model: XT1642 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8952.gen Firmware released date: Nov 21 2016 Firmware released time: 17:26:00 Firmware compiled date: Nov 21 2016 Firmware compiled time: 06:00:00 SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1 Enabling "USB Debugging" mode... Searching for a phone. Please wait... Enabling "USB Debugging" mode... Put the phone in Factory Mode: 1. Disconnect USB cable; 2. Power OFF the phone; 3. Press "Vol-" and "Power" buttons; 4. Select Factory Mode then confirm your selection; 5. Wait until phone is power ON and connect USB Cable; 6. Install necesarry drivers then press "OK" button Searching for a phone (waiting for ADB device)... Operation was failed! Performed by 1.7.3.0 Software version. Platform: MOTOROLA Selected model: XT1642 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8952.gen Firmware released date: Nov 21 2016 Firmware released time: 17:26:00 Firmware compiled date: Nov 21 2016 Firmware compiled time: 06:00:00 SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1 Enabling "USB Debugging" mode... Put the phone in Factory Mode: 1. Disconnect USB cable; 2. Power OFF the phone; 3. Press "Vol-" and "Power" buttons; 4. Select Factory Mode then confirm your selection; 5. Wait until phone is power ON and connect USB Cable; 6. Install necesarry drivers then press "OK" button Searching for a phone (waiting for ADB device)... Operation was failed! Performed by 1.7.3.0 Software version. Platform: MOTOROLA Selected model: XT1642 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8952.gen Firmware released date: Nov 21 2016 Firmware released time: 17:26:00 Firmware compiled date: Nov 21 2016 Firmware compiled time: 06:00:00 SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1 Enabling "USB Debugging" mode... Searching for a phone. Please wait... Enabling "USB Debugging" mode... Put the phone in Factory Mode: 1. Disconnect USB cable; 2. Power OFF the phone; 3. Press "Vol-" and "Power" buttons; 4. Select Factory Mode then confirm your selection; 5. Wait until phone is power ON and connect USB Cable; 6. Install necesarry drivers then press "OK" button Searching for a phone (waiting for ADB device)... Operation was failed! Performed by 1.7.3.0 Software version. Platform: MOTOROLA Selected model: XT1642 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8952.gen Firmware released date: Nov 21 2016 Firmware released time: 17:26:00 Firmware compiled date: Nov 21 2016 Firmware compiled time: 06:00:00 SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.77751.1a.78253.1 Enabling "USB Debugging" mode... Put the phone in Factory Mode: 1. Disconnect USB cable; 2. Power OFF the phone; 3. Press "Vol-" and "Power" buttons; 4. Select Factory Mode then confirm your selection; 5. Wait until phone is power ON and connect USB Cable; 6. Install necesarry drivers then press "OK" button Searching for a phone (waiting for ADB device)... Operation was failed! Performed by 1.7.3.0 Software version.