Motorola G5 XT1676 FRP remove OK, good work! Thank you! - GSM-Forum

dominik1 · 01-22-2018, 15:43

Motorola G5 XT1676 FRP remove OK, good work! Thank you!

Platform: MOTOROLA
Selected model: XT1676
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Jan 17 2017
Firmware released time: 19:46:18
Firmware compiled date: Jan 06 2017
Firmware compiled time: 02:00:00
SW version: MPSS.JO.2.0.c1-00122-8937_GENNS_PACK-1.82203.1a.82889.1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPP25.137-33
Date: Mon Feb 6 18:44:42 CST 2017
Android version: 7.0
Baseband M8937_8000.122.02.45R CEDRIC_EMEADSDS_CUST
Detected phone model: XT1676
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.0 Software version.

Octopus box · 01-22-2018, 17:02

Thank You also for good report.

01-22-2018, 15:43	#1 (permalink)
dominik1 No Life Poster Join Date: Mar 2007 Location: Budapest Posts: 743 Member: 472482 Status: Offline Thanks Meter: 105	Motorola G5 XT1676 FRP remove OK, good work! Thank you! Motorola G5 XT1676 FRP remove OK, good work! Thank you! Platform: MOTOROLA Selected model: XT1676 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8937.gen Firmware released date: Jan 17 2017 Firmware released time: 19:46:18 Firmware compiled date: Jan 06 2017 Firmware compiled time: 02:00:00 SW version: MPSS.JO.2.0.c1-00122-8937_GENNS_PACK-1.82203.1a.82889.1 Enabling "USB Debugging" mode... Put the phone in Factory Mode: 1. Disconnect USB cable; 2. Power OFF the phone; 3. Press "Vol-" and "Power" buttons; 4. Select Factory Mode then confirm your selection; 5. Wait until phone is power ON and connect USB Cable; 6. Install necesarry drivers then press "OK" button Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB device)... Phone found. Reading info... Phone model: motorola Moto G (5) SW version: NPP25.137-33 Date: Mon Feb 6 18:44:42 CST 2017 Android version: 7.0 Baseband M8937_8000.122.02.45R CEDRIC_EMEADSDS_CUST Detected phone model: XT1676 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.1.0 Software version. Last edited by Octopus box; 01-22-2018 at 17:04.

01-22-2018, 17:02	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,846 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Thank You also for good report.