SM-N9200 (Note5) Reset FRP Successfully Done with FRP Tool - GSM-Forum

kashif9 · 11-14-2017, 11:17

Code:

INFO  : 13/11/2017 6:38:13 PM > Platform: SAMSUNG
INFO  : 13/11/2017 6:38:13 PM > Selected model: SM-N920C
WARN  : 13/11/2017 6:38:13 PM > To put SM-N920C into Download Mode, You have to perform the following steps:
WARN  : 13/11/2017 6:38:13 PM > 1. Reconnect the battery.
WARN  : 13/11/2017 6:38:13 PM > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN  : 13/11/2017 6:38:13 PM > 3. When phone turns on, press "Volume+" key.
INFO  : 13/11/2017 6:38:13 PM > Searching for a phone. Please wait...
INFO  : 13/11/2017 6:38:22 PM > Phone found.
INFO  : 13/11/2017 6:38:22 PM > Initializing..
INFO  : 13/11/2017 6:38:22 PM > PIT was read successfully.
INFO  : 13/11/2017 6:38:22 PM > Searching for UART interface..
INFO  : 13/11/2017 6:38:22 PM >  COM3
WARN  : 13/11/2017 6:38:26 PM > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO  : 13/11/2017 6:38:26 PM > Searching for device. Please wait...
INFO  : 13/11/2017 6:38:44 PM > Resetting FRP lock..
WARN  : 13/11/2017 6:38:44 PM > FRP lock is successfully reseted!
BINF  : 13/11/2017 6:38:44 PM > Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
INFO  : 13/11/2017 6:38:44 PM > Performed by 1.0.0 Software version.

N9200 done with FRP Tool by Selecting N920C Model and Done by doing with UART.

RazoR888 · 04-15-2018, 18:16

me too done
first put phone in download mode then connect uart cable to box

proglak · 08-07-2018, 12:44

This step will lose data OR NOT

04-15-2018, 18:16	#2 (permalink)
RazoR888 Freak Poster Join Date: Sep 2008 Location: Alex_Egypt Posts: 423 Member: 870868 Status: Offline Thanks Meter: 126	me too done first put phone in download mode then connect uart cable to box

08-07-2018, 12:44	#3 (permalink)
proglak Freak Poster Join Date: Nov 2016 Posts: 103 Member: 2652531 Status: Offline Thanks Meter: 66	This step will lose data OR NOT