🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 298 - GSM-Forum

Dr_Wolodya · 08-05-2019, 15:35

Tecno DP7CPro Reset FRP successfully done:

Code:

INFO  : 05.08.2019 16:12:52 > Welcome to Octoplus FRP Tool v.1.7.6.2
INFO  : 05.08.2019 16:14:54 > Platform: TECNO
INFO  : 05.08.2019 16:14:54 > Selected model: DP7CPRO
WARN  : 05.08.2019 16:14:54 > Please, power phone OFF and connect USB cable.
INFO  : 05.08.2019 16:14:54 > Searching for a phone. Please wait...
INFO  : 05.08.2019 16:15:01 > Found phone on COM19
INFO  : 05.08.2019 16:15:01 > Detecting Chip Version...
INFO  : 05.08.2019 16:15:01 > HW Chip: MT6580: 6580.0000
INFO  : 05.08.2019 16:15:01 > HW Version: 8A00.CA00.0000.0000
INFO  : 05.08.2019 16:15:01 > Connecting...
INFO  : 05.08.2019 16:15:01 > Brom Version: FF
INFO  : 05.08.2019 16:15:01 > BootLoader Version: 01
INFO  : 05.08.2019 16:15:01 > Searching Download Agent...
INFO  : 05.08.2019 16:15:05 > Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
INFO  : 05.08.2019 16:15:05 > Sending Download Agent...
INFO  : 05.08.2019 16:15:06 > DA sent successfully
INFO  : 05.08.2019 16:15:06 > Initializing DA...
INFO  : 05.08.2019 16:15:06 > Synchronizing with DA...
INFO  : 05.08.2019 16:15:06 > NAND Flash: not installed
INFO  : 05.08.2019 16:15:06 > eMMC Flash: .70010056.31303031.36503559.39E76381
INFO  : 05.08.2019 16:15:06 > eMMC Flash: Pretec: V10016
INFO  : 05.08.2019 16:15:06 > DA ver: 4.2.9C
INFO  : 05.08.2019 16:15:06 > Initializing Memory Flash..
INFO  : 05.08.2019 16:15:07 > Initialization successfully completed
INFO  : 05.08.2019 16:15:08 > Sending loaders...
INFO  : 05.08.2019 16:15:08 > Loader send successfuly.
INFO  : 05.08.2019 16:15:08 > Reading Flash Info...
INFO  : 05.08.2019 16:15:09 > EMMC rpmb size: 4 Mb
INFO  : 05.08.2019 16:15:09 > EMMC boot1 size: 4 Mb
INFO  : 05.08.2019 16:15:09 > EMMC boot2 size: 4 Mb
INFO  : 05.08.2019 16:15:10 > EMMC gp1 size: 0 Mb
INFO  : 05.08.2019 16:15:10 > EMMC gp2 size: 0 Mb
INFO  : 05.08.2019 16:15:10 > EMMC gp3 size: 0 Mb
INFO  : 05.08.2019 16:15:10 > EMMC gp4 size: 0 Mb
INFO  : 05.08.2019 16:15:10 > EMMC user area size: 14432 Mb
INFO  : 05.08.2019 16:15:10 > Internal RAM size: 128 Kb
INFO  : 05.08.2019 16:15:10 > External RAM size: 1024 Mb
INFO  : 05.08.2019 16:15:10 > Reading partition...
INFO  : 05.08.2019 16:15:10 > Reading info...
INFO  : 05.08.2019 16:15:10 > Brand: TECNO
INFO  : 05.08.2019 16:15:10 > Model: TECNO DP7CPRO
INFO  : 05.08.2019 16:15:10 > Device: DP7CPRO
INFO  : 05.08.2019 16:15:10 > Platform: mt6580
INFO  : 05.08.2019 16:15:10 > Android version: 5.1
INFO  : 05.08.2019 16:15:10 > Display ID: DP7CPRO-KC07T-B1-L-20160607
INFO  : 05.08.2019 16:15:10 > Searching for signatures...
INFO  : 05.08.2019 16:15:10 > Resetting FRP lock..
WARN  : 05.08.2019 16:15:10 > FRP lock is successfully reseted!
INFO  : 05.08.2019 16:15:10 > Backup saved as TECNO_TECNO DP7CPRO_05-08-2019_16-15-10.dump file
INFO  : 05.08.2019 16:15:10 > Performed by 1.7.6.2 Software version.

apacheadmiral · 08-05-2019, 17:03

Welcome to Octoplus FRP Tool v.1.7.6.0
Platform: HISENSE
Selected model: F10
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM37
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_byOctoplus_Hisense_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A558C5.B25A968B
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.93
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Hisense
Model: Hisense F10
Device: HS6737MT
Platform: mt6737m
Android version: 7.0
Display ID: NRD90M release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Hisense_Hisense F10_05-08-2019_17-12-16.dump file
Performed by 1.7.6.0 Software version.

dragosgsm · 08-05-2019, 23:08

Platform: WIKO
Selected model: VIEW
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM118
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100007705
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: WIKO
Model: View
Device: v12bnlite
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as WIKO_View_06-08-2019_01-04-11.dump file
Performed by 1.7.6.0 Software version.

dragosgsm · 08-05-2019, 23:08

Platform: WIKO
Selected model: VIEW
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM118
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100007705
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: WIKO
Model: View
Device: v12bnlite
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as WIKO_View_06-08-2019_01-04-11.dump file
Performed by 1.7.6.0 Software version.

Gsm_Flash Baba · 08-06-2019, 07:14

Walton NF4 -Andriod version 8.1 FRP Remove Done By Octoplus Frp Dongle

Welcome to Octoplus FRP Tool v.1.7.6.0
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM11
Operation was canceled
Performed by 1.7.6.0 Software version.

Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM11
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CB00.0002.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7296 Mb
eMMC Flash: .70010045.48384545.380120D3.924CC5D7
eMMC Flash: Pretec: EH8EE8
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: WALTON
Model: Primo NF4
Device: Primo_NF4
Android version: 8.1.0
Display ID: Primo_NF4_20190401_V11
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as WALTON_Primo NF4_06-08-2019_12-01-23.dump file
Performed by 1.7.6.0 Software version.

apacheadmiral · 08-06-2019, 15:53

Sansui Play FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.7.6.0
Platform: __GENERAL RESET FRP METHODS
Selected model: SC983X
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM900
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Sansui
Model: Sansui Play
Device: Play
Platform: sc8830
Android version: 7.0
Display ID: NRD90M release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Sansui_Sansui Play_06-08-2019_16-48-34.dump file
Performed by 1.7.6.0 Software version.

karim1980 · 08-06-2019, 21:36

Condor griffe T8 sp532

FRP DONE

Platform: CONDOR
Selected model: SP-630
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.7.5.0 Software version.

Platform: CONDOR
Selected model: SP-630
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM17
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Condor
Model: Griffe T8
Device: Griffe_T8
Android version: 8.1.0
Custom build version: SP532_V06_20190304
Internal build version: Y400AG_8.1_CON_DZ_17
Display ID: OPM2.171019.012 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Condor_Griffe T8_06-08-2019_21-29-44.dump file
Performed by 1.7.5.0 Software version.

karim1980 · 08-06-2019, 21:36

Condor griffe T8 sp532

FRP DONE

Platform: CONDOR
Selected model: SP-630
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.7.5.0 Software version.

Platform: CONDOR
Selected model: SP-630
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM17
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Condor
Model: Griffe T8
Device: Griffe_T8
Android version: 8.1.0
Custom build version: SP532_V06_20190304
Internal build version: Y400AG_8.1_CON_DZ_17
Display ID: OPM2.171019.012 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Condor_Griffe T8_06-08-2019_21-29-44.dump file
Performed by 1.7.5.0 Software version.

Yahia_Sb · 08-07-2019, 14:44

samphoney i18 frp done one click-just select v98 and click frp tab. 100% done tested me

Platform: SYMPHONY
Selected model: V98
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM14
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as SYMPHONY_V98_07-08-2019_19-40-34.dump file
Performed by 1.7.7.2 Software version.

Dr_Wolodya · 08-07-2019, 15:13

Samsung SM-G930F (7.0) Reset FRP successfully done by UART:

Code:

Welcome to Octoplus FRP Tool v.1.7.7.2
Platform: SAMSUNG
Selected model: SM-G930F
To put SM-G930F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.7.7.2 Software version.

Ahmedashik · 08-07-2019, 17:34

Micromax Q349 Frp Reset Done By Octoplus Frp Tool

Quote:

Welcome to Octoplus FRP Tool v.1.7.7.2
Platform: MICROMAX
Selected model: Q349
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM43
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473165.05074E7B.CA686391
eMMC Flash: Hynix: H8G1e
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Micromax
Model: Micromax Q349
Device: Q349
Platform: mt6580
Android version: 6.0
Display ID: MMX_Q349_SW_V20_HW_V1.0_21072016
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Micromax_Micromax Q349_07-08-2019_21-41-01.dump file
Performed by 1.7.7.2 Software version.

Yahia_Sb · 08-08-2019, 04:58

samsung j415Fn frp done

Platform: SAMSUNG
Selected model: SM-G850F
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-J415FN
Firmware compiled date: Wed Mar 13 20:30:40 KST 2019
PDA version: FA81_J415FXXU2ASC2
CSC version: unknown
SW version: J415FXXU2ASC1
Phone SN: R58M30MQGPR
Android version: 8.1.0 (M1AJQ)
Sales code: unknown
Country: unknown
HW platform: msm8937
HW Chip: MSM8917
HW Modem: MSM8917
Security patch level: 2018-08-01
Codename: j4primeltedx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.7.7.2 Software version.

hasanphone · 08-08-2019, 13:08

OKAPIA MIRAGE FRP RESET SUCCESS
Welcome to Octoplus FRP Tool v.1.7.6.0
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM7
Detecting Chip Version...
HW Chip: MT6735: 0321.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.3832334D.4200B1E2.EEACAB83
eMMC Flash: Samsung: Q823MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Okapia
Model: Okapia_Mirage
Device: Okapia_Mirage
Platform: mt6735
Android version: 5.1
Display ID: Okapia_Mirage_V06_160606
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Okapia_Okapia_Mirage_08-08-2019_18-04-55.dump file
Performed by 1.7.6.0 Software version.

Dzomega · 08-08-2019, 15:32

Welcome to Octoplus FRP Tool v.1.7.6.0
Platform: HUAWEI
Selected model: ANE-LX1
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM64
Checking resource files...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM64
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: ANE-LX1
Phone SN: 9WV4C18623004895
Phone IMEI: 86367504847***
Phone IMEI2: 86367504850****
SW version: ANE-LX1 9.1.0.147(C432E5R1P7)
FRP lock is successfully reseted!
Performed by 1.7.6.0 Software version.

Dzomega · 08-08-2019, 15:33

Welcome to Octoplus FRP Tool v.1.7.6.0
Platform: HUAWEI
Selected model: ANE-LX1
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM64
Checking resource files...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM64
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: ANE-LX1
Phone SN: 9WV4C18623004895
Phone IMEI: 86367504847***
Phone IMEI2: 86367504850****
SW version: ANE-LX1 9.1.0.147(C432E5R1P7)
FRP lock is successfully reseted!
Performed by 1.7.6.0 Software version.

phone still locked!!

08-06-2019, 07:14	#4460 (permalink)
Gsm_Flash Baba Insane Poster Join Date: Aug 2017 Location: Dhaka. Bangladesh Posts: 83 Member: 2743172 Status: Offline Sonork: Gsmhosting Thanks Meter: 39	Walton NF4 -Andriod version 8.1 FRP Remove Done By Octoplus Frp Dongle Walton NF4 -Andriod version 8.1 FRP Remove Done By Octoplus Frp Dongle Welcome to Octoplus FRP Tool v.1.7.6.0 Platform: __GENERAL RESET FRP METHODS Selected model: MTK GENERAL Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM11 Operation was canceled Performed by 1.7.6.0 Software version. Platform: __GENERAL RESET FRP METHODS Selected model: MTK GENERAL Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM11 Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CB00.0002.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7296 Mb eMMC Flash: .70010045.48384545.380120D3.924CC5D7 eMMC Flash: Pretec: EH8EE8 Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: WALTON Model: Primo NF4 Device: Primo_NF4 Android version: 8.1.0 Display ID: Primo_NF4_20190401_V11 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as WALTON_Primo NF4_06-08-2019_12-01-23.dump file Performed by 1.7.6.0 Software version.

08-05-2019, 17:03	#4457 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Welcome to Octoplus FRP Tool v.1.7.6.0 Platform: HISENSE Selected model: F10 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM37 Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_byOctoplus_Hisense_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473461.32A558C5.B25A968B eMMC Flash: Hynix: H8G4a2 DA ver: 4.2.93 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Hisense Model: Hisense F10 Device: HS6737MT Platform: mt6737m Android version: 7.0 Display ID: NRD90M release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Hisense_Hisense F10_05-08-2019_17-12-16.dump file Performed by 1.7.6.0 Software version.

08-05-2019, 23:08	#4458 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	Platform: WIKO Selected model: VIEW Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM118 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000560E100007705 QC CPU: Snapdragon 425 MSM8917 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: WIKO Model: View Device: v12bnlite Platform: msm8937 Android version: 7.1.2 Display ID: N2G47H release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Rebooting phone Backup saved as WIKO_View_06-08-2019_01-04-11.dump file Performed by 1.7.6.0 Software version.

08-05-2019, 23:08	#4459 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	Platform: WIKO Selected model: VIEW Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM118 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000560E100007705 QC CPU: Snapdragon 425 MSM8917 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: WIKO Model: View Device: v12bnlite Platform: msm8937 Android version: 7.1.2 Display ID: N2G47H release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Rebooting phone Backup saved as WIKO_View_06-08-2019_01-04-11.dump file Performed by 1.7.6.0 Software version.

08-06-2019, 15:53	#4461 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Sansui Play FRP lock is successfully reseted! Welcome to Octoplus FRP Tool v.1.7.6.0 Platform: __GENERAL RESET FRP METHODS Selected model: SC983X Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM900 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Sansui Model: Sansui Play Device: Play Platform: sc8830 Android version: 7.0 Display ID: NRD90M release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Sansui_Sansui Play_06-08-2019_16-48-34.dump file Performed by 1.7.6.0 Software version.

08-06-2019, 21:36	#4462 (permalink)
karim1980 No Life Poster Join Date: Aug 2007 Location: Algeria Posts: 575 Member: 574410 Status: Offline Thanks Meter: 93	Condor griffe T8 sp532 FRP DONE Platform: CONDOR Selected model: SP-630 Please, power phone OFF, press and hold "Vol-" button and connect USB cable. Searching for a phone. Please wait... Operation was canceled Performed by 1.7.5.0 Software version. Platform: CONDOR Selected model: SP-630 Please, power phone OFF, press and hold "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM17 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Condor Model: Griffe T8 Device: Griffe_T8 Android version: 8.1.0 Custom build version: SP532_V06_20190304 Internal build version: Y400AG_8.1_CON_DZ_17 Display ID: OPM2.171019.012 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Condor_Griffe T8_06-08-2019_21-29-44.dump file Performed by 1.7.5.0 Software version.

08-06-2019, 21:36	#4463 (permalink)
karim1980 No Life Poster Join Date: Aug 2007 Location: Algeria Posts: 575 Member: 574410 Status: Offline Thanks Meter: 93	Condor griffe T8 sp532 FRP DONE Platform: CONDOR Selected model: SP-630 Please, power phone OFF, press and hold "Vol-" button and connect USB cable. Searching for a phone. Please wait... Operation was canceled Performed by 1.7.5.0 Software version. Platform: CONDOR Selected model: SP-630 Please, power phone OFF, press and hold "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM17 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Condor Model: Griffe T8 Device: Griffe_T8 Android version: 8.1.0 Custom build version: SP532_V06_20190304 Internal build version: Y400AG_8.1_CON_DZ_17 Display ID: OPM2.171019.012 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Condor_Griffe T8_06-08-2019_21-29-44.dump file Performed by 1.7.5.0 Software version.

08-07-2019, 14:44	#4464 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	samphoney i18 frp done one click-just select v98 and click frp tab. 100% done tested me Platform: SYMPHONY Selected model: V98 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM14 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as SYMPHONY_V98_07-08-2019_19-40-34.dump file Performed by 1.7.7.2 Software version.

08-08-2019, 04:58	#4467 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	samsung j415Fn frp done Platform: SAMSUNG Selected model: SM-G850F Searching for a phone (waiting for ADB device)... Reading info... Detected phone model: SM-J415FN Firmware compiled date: Wed Mar 13 20:30:40 KST 2019 PDA version: FA81_J415FXXU2ASC2 CSC version: unknown SW version: J415FXXU2ASC1 Phone SN: R58M30MQGPR Android version: 8.1.0 (M1AJQ) Sales code: unknown Country: unknown HW platform: msm8937 HW Chip: MSM8917 HW Modem: MSM8917 Security patch level: 2018-08-01 Codename: j4primeltedx Resetting FRP lock.. FRP lock is successfully reseted! Goto "Menu->Settings->Backup and reset" and make "Factory data reset" Performed by 1.7.7.2 Software version.

08-08-2019, 13:08	#4468 (permalink)
hasanphone Freak Poster Join Date: Sep 2006 Location: BANGLADESH Posts: 363 Member: 342931 Status: Offline Sonork: 100.1659224 Thanks Meter: 83	OKAPIA MIRAGE FRP RESET SUCCESS Welcome to Octoplus FRP Tool v.1.7.6.0 Platform: __GENERAL RESET FRP METHODS Selected model: MTK GENERAL Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM7 Detecting Chip Version... HW Chip: MT6735: 0321.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.3832334D.4200B1E2.EEACAB83 eMMC Flash: Samsung: Q823MB DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: Okapia Model: Okapia_Mirage Device: Okapia_Mirage Platform: mt6735 Android version: 5.1 Display ID: Okapia_Mirage_V06_160606 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Okapia_Okapia_Mirage_08-08-2019_18-04-55.dump file Performed by 1.7.6.0 Software version.

08-08-2019, 15:32	#4469 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	Welcome to Octoplus FRP Tool v.1.7.6.0 Platform: HUAWEI Selected model: ANE-LX1 Put the phone into Factory mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint. Searching for a phone. Please wait... Found phone on COM64 Checking resource files... Downloading resources... Searching for a phone. Please wait... Found phone on COM64 Setting options... Writing BOOT... Switching to FastBoot mode... Searching for a phone. Please wait... Detected phone model: ANE-LX1 Phone SN: 9WV4C18623004895 Phone IMEI: 86367504847* Phone IMEI2: 86367504850** SW version: ANE-LX1 9.1.0.147(C432E5R1P7) FRP lock is successfully reseted! Performed by 1.7.6.0 Software version.

08-08-2019, 15:33	#4470 (permalink)
Dzomega No Life Poster Join Date: Jun 2016 Location: UK Posts: 613 Member: 2581848 Status: Offline Thanks Meter: 249	Welcome to Octoplus FRP Tool v.1.7.6.0 Platform: HUAWEI Selected model: ANE-LX1 Put the phone into Factory mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint. Searching for a phone. Please wait... Found phone on COM64 Checking resource files... Downloading resources... Searching for a phone. Please wait... Found phone on COM64 Setting options... Writing BOOT... Switching to FastBoot mode... Searching for a phone. Please wait... Detected phone model: ANE-LX1 Phone SN: 9WV4C18623004895 Phone IMEI: 86367504847* Phone IMEI2: 86367504850** SW version: ANE-LX1 9.1.0.147(C432E5R1P7) FRP lock is successfully reseted! Performed by 1.7.6.0 Software version. phone still locked!!