|
Success Remove FRP on Huawei P8 lite 2017 (PRA-LA1) Welcome to Octoplus FRP Tool v.1.2.9.0 Platform: HUAWEI Selected model: PRA-LA1 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: PRA-LA1 Phone SN: PSEDU17120005155 Phone IMEI: 863159030645725 Phone IMEI2: 863159030675730 SW version: PRA-LA1C185B120 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.2.9.0 Software version. |
NOKIA TA-1032 Reset FRP successfully done Welcome to Octoplus FRP Tool v.1.2.8.0 Platform: NOKIA Selected model: TA-1032 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM185 Detecting Chip Version... HW Chip: MT6735: 0335.0000 HW Version: 8A00.CB00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Nokia_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .13014E51.324A3936.52100872.A0330CA3 eMMC Flash: Unknown: Q2J96R DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15028 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: Unknown Model: Heart Device: Unknown Platform: mt6737m Android version: 7.1.1 Display ID: 00WW_2_15H Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as NOKIA_TA-1032_31-05-2018_23-37-14.dump file Performed by 1.2.8.0 Software version. |
🐙 Moto E (4) Plus XT1770 FRP lock is successfully reseted {SUCCESS} Welcome to Octoplus FRP Tool v.1.2.8.0 Platform: MOTOROLA Selected model: XT1770 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM6 Detecting Chip Version... HW Chip: MT6735: 0335.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.42473461.32A54EF9.0D4E53E5 eMMC Flash: Hynix: HBG4a2 DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 29820 Mb Internal RAM size: 128 Kb External RAM size: 3072 Mb Reading partition... Reading info... Brand: motorola Model: Moto E (4) Plus Device: nicklaus Platform: mt6737m Android version: 7.1.1 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as MOTOROLA_XT1770_01-06-2018_10-49-26.dump file Performed by 1.2.8.0 Software version. |
🐙 Xiaomi Redmi 4X FRP Lock Successfully Reseted |
🐙 Greentel X1 7.0 FRP reset success by Octopus FRP tool Just one click :D:D Code: Welcome to Octoplus FRP Tool v.1.2.4 |
🐙 PALTICE STARTRAIL 7 Reset FRP successfully done Searching for a phone. Please wait... Found phone on COM17 Detecting Chip Version... HW Chip: MT6735: 0335.0000 HW Version: 8A00.CB00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473165.050757A7.0AEEBB85 eMMC Flash: Hynix: H8G1e DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: ALTICE Model: STARTRAIL7 Device: STARTRAIL7 Platform: mt6735m Android version: 5.1 Display ID: LMY47D Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as BLACKVIEW_A7_01-06-2018_12-04-48.dump file Performed by 1.2.8.0 Software version. |
SAMSUNG SM-N920C Reset FRP successfully done Welcome to Octoplus FRP Tool v.1.2.8.0 Platform: SAMSUNG Selected model: SM-N920C To put SM-N920C into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.2.8.0 Software version. |
itel A15 FRP DONE! Welcome to Octoplus FRP Tool v.1.2.9.0 Platform: BLACKVIEW Selected model: A7 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM7 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .70010045.48384544.34010A51.6D6245EB eMMC Flash: Pretec: EH8ED4 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7296 Mb Internal RAM size: 128 Kb External RAM size: 512 Mb Reading partition... Reading info... Brand: Itel Model: itel A15 Device: itel-A15 Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as BLACKVIEW_A7_01-06-2018_14-13-20.dump file Performed by 1.2.9.0 Software version. |
Samsung J2 Prime SM-G532M Reset FRP Successfully Done!!! Code: INFO : 01/06/2018 10:48:19 > Performed by 1.2.9.0 Software version. |
LG M700A Reset FRP successfully done Welcome to Octoplus FRP Tool v.1.2.8.0 Platform: LG Selected model: M700A Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM324 Reading info... Detected phone model: LG-M700A Mode: Normal Android version: 7.1.1 Factory SW M70010j Trying to enable Diagnostic Port... Found phone on COM324 Firmware released date: Feb 7 2018 Firmware released time: 19:21:23 Firmware compiled date: Sep 01 2017 Firmware compiled time: 09:00:00 Switching to Download Mode... Found phone on COM324 Initializing.. SW version: LGM700AAT-00-V10j-AME-XX-FEB-07-2018-32G+0 Android version: 7.1.1 Reset FRP operation for M700A will delete all user data on the phone (contacts, pictures and others)! Do You want to continue? Reading partition... Detecting writing method... Trying to repeat.. Trying third method... Resetting FRP lock.. Writing loader... Writing userdata... Formating encrypt section Restoring loader... Perform factory reset to complete operation! FRP lock is successfully reseted! Performed by 1.2.8.0 Software version. |
🐙 LG H815 Resetting FRP OK OK Welcome to Octoplus FRP Tool v.1.2.8.0;) Platform: LG Selected model: H815 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM53 Reading info... Detected phone model: LG-H815 Mode: Normal Android version: 6.0 Factory SW H81520m Trying to enable Diagnostic Port... Found phone on COM53 Firmware released date: Mar 28 2018 Firmware released time: 14:52:36 Firmware compiled date: Oct 15 2015 Firmware compiled time: 01:00:00 Switching to Download Mode... Found phone on COM53 Initializing.. SW version: LGH815AT-00-V20m-OPT2-HQ-MAR-28-2018+0 Android version: 6.0 Reading partition... :p lock.. FRP lock is successfully reseted! Performed by 1.2.8.0 Software version. |
Tecno Camon I Air IN3 Android 7.0 FRP lock is successfully reseted! Tecno Camon I Air IN3 Android 7.0 FRP lock is successfully reseted! http://i63.tinypic.com/105zdir.jpg Welcome to Octoplus FRP Tool v.1.2.9.0 Platform: TECNO Selected model: IN3 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM12 Detecting Chip Version... HW Chip: MT6737T: 0321.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017/12/28.11:39_396299, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.4536334D.420319D4.07E8FA13 eMMC Flash: Samsung: QE63MB DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: TECNO Model: TECNO IN3 Device: TECNO-IN3 Platform: mt6737t Android version: 7.0 Display ID: IN3-H3721D-N-171219V7 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as TECNO_IN3_02-06-2018_16-36-49.dump file Performed by 1.2.9.0 Software version. thanks octopus team |
🐙 Sony Xperia XA1 Ultra Reset FRP successfully done SONY XPERIA XA1 ULTRA 7.0 REMOVE FRP DONE LOG: Platform: _GENERAL RESET FRP METHODS Selected model: ADB METHOD Searching for a phone (waiting for ADB device)... Phone found. Reading info... Phone model: Sony G3212 SW version: 42.0.A.4.167 Date: Tue Jan 2 21:46:13 CST 2018 Android version: 7.0 Baseband MOLY.LR11.W1603.MD.TC9.SM11L.CAF.SP.V1.P15, 2017/12/28 00:25 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.2.9.0 Software version. BR MUDASIR ALI |
🐙 Panasonic ELUGA_I2 FRP lock is successfully reseted Welcome to Octoplus FRP Tool v.1.2.9.0 Platform: PANASONIC Selected model: ELUGA I5 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM3 Detecting Chip Version... HW Chip: MT6735: 0335.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.3732534D.42007E40.EC1B06ED eMMC Flash: Samsung: Q72SMB DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Panasonic Model: ELUGA_I2 Device: ELUGA_I2 Platform: mt6735m Android version: 5.1 Display ID: EB-90S50EI2v1225 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as PANASONIC_ELUGA I5_03-06-2018_13-42-01.dump file Performed by 1.2.9.0 Software version. |
🐙 Dialog Blaze Reset FRP successfully done dialog blaze frp done selected as cubot Dinosaur Welcome to Octoplus FRP Tool v.1.2.9.0 Platform: CUBOT Selected model: DINOSAUR Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM15 Detecting Chip Version... HW Chip: MT6735: 0335.0000 HW Version: 8A00.CB00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473461.92A23230.6C010021 eMMC Flash: Hynix: H8G4a’ DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Dialog-Blaze Model: M50E-1A Device: M50E-1A Platform: mt6737m Android version: 7.0 Display ID: Dialog_M50E-1A_V1.0 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as CUBOT_DINOSAUR_03-06-2018_14-14-54.dump file Performed by 1.2.9.0 Software version. |
| All times are GMT +1. The time now is 05:51. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -