GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 09-25-2018, 20:10   #1696 (permalink)
No Life Poster
 
daryl007's Avatar
 
Join Date: Feb 2009
Location: nicaragua
Posts: 548
Member: 980307
Status: Offline
Sonork: 100.1649165
Thanks Meter: 173
Cool 🐙 Samsung SM-G570M bit3 Reset FRP successfully done


elected AP file: C:\Users\jorge\Desktop\actualizacion 8\frp g570m binario 3\sboot frp g570m bit3.tar
Platform: SAMSUNG
Selected model: SM-G570M
Please put the phone into Download Mode and connect USB cable.
To put SM-G570M into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Firmware writing successfully completed.
Performed by 1.4.2.0 Software version.

Platform: SAMSUNG
Selected model: SM-G570M
Searching for UART interface.. COM69
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM69
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP lock is successfully reseted!
Performed by 1.4.2.0 Software version.

Last edited by Octopus box; 09-26-2018 at 04:32.
  Reply With Quote
The Following User Says Thank You to daryl007 For This Useful Post:
Old 09-25-2018, 22:34   #1697 (permalink)
No Life Poster
 
daryl007's Avatar
 
Join Date: Feb 2009
Location: nicaragua
Posts: 548
Member: 980307
Status: Offline
Sonork: 100.1649165
Thanks Meter: 173
Smile 🐙 Sky Platinum 4.0 Reset FRP successfully done

Platform: _GENERAL RESET FRP METHODS
Selected model: SC77XX
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM94
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: SKY
Model: Platinum 4.0
Device: c390_trx_076
Platform: sc8830
Android version: 6.0
Display ID: MRA58K release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as _GENERAL RESET FRP METHODS_SC77XX_25-09-2018_15-33-57.dump file
Performed by 1.4.2.0 Software version.

Last edited by Octopus box; 09-26-2018 at 04:40.
  Reply With Quote
The Following User Says Thank You to daryl007 For This Useful Post:
Old 09-25-2018, 23:32   #1698 (permalink)
No Life Poster
 
Join Date: Jan 2006
Location: PORTUGAL
Posts: 766
Member: 216446
Status: Offline
Thanks Meter: 220
Samsung SM-J320FN Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.4.2.0
Platform: SAMSUNG
Selected model: SM-J320FN
Reset FRP/ Reactivation lock operation for SM-J320FN will delete all user data on the phone (contacts, pictures and others)!

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J320FN into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.4.2.0 Software version.

Last edited by Octopus box; 09-26-2018 at 04:27.
  Reply With Quote
The Following User Says Thank You to jseyedanas For This Useful Post:
Old 09-26-2018, 08:31   #1699 (permalink)
No Life Poster
 
Join Date: Aug 2013
Location: Russia, Ivanovo city
Posts: 660
Member: 2006990
Status: Offline
Thanks Meter: 540
Thumbs up 🐙 ZTE Blade V8 TEST FTM QUALCOMM Reset FRP

Platform: ZTE
Selected model: _TEST FTM QUALCOMM
Put the phone into Factory mode:
1. Power phone OFF;
2. Press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM117
Mode: Diagnostic
Firmware released date: Aug 20 2017
Firmware released time: 04:25:24
Firmware compiled date: Aug 10 2017
Firmware compiled time: 01:00:00
SW version: MPSS.TA.2.3.c1-00395-8953_GEN_PACK-1.108538.1.111198.1
Rebooting to Qualcomm 9008 mode...
Found phone on COM25
Mode: Qualcomm 9008
Connecting...
Reading info...
QC Block ID: 87279EBC
QC HW ID: 0006B0E100040000
QC CPU: Snapdragon 435 MSM8940
QC HASH: 7AB9F197BE88FBAA318AE1AED0A94C660E620AC237495BAF86 A1F51BEE2D96AF
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: ZTE
Model: ZTE BLADE V0800
Device: ZTE_BLADE_V0800
Platform: msm8937
Android version: 7.0
Display ID: GEN_RU_BV0800_V1.6
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as ZTE__TEST FTM QUALCOMM_26-09-2018_10-26-57.dump file
Performed by 1.4.2.0 Software version.


Thanks Octopus Team!!!!

Last edited by Octopus box; 09-26-2018 at 08:39.
  Reply With Quote
The Following 2 Users Say Thank You to Surtax For This Useful Post:
Old 09-26-2018, 10:04   #1700 (permalink)
No Life Poster
 
Join Date: Aug 2006
Location: gsmchaudhrayarshad
Age: 43
Posts: 6,993
Member: 328688
Status: Offline
Thanks Meter: 2,282
Donate money to this user
Thumbs up Huawei Y6 Pro TIT-U02 Reset FPost here success Reset FRP story with Octoplus FRP Tool

HERE LOG


Code:
Welcome to Octoplus FRP Tool v.1.4.2.0
Platform: _GENERAL RESET FRP METHODS
Selected model: MTK CUSTOM
Operation was canceled
Performed by 1.4.2.0 Software version.

Platform: HUAWEI
Selected model: TIT-U02
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.3
Sending Download Agent...
Operation was failed!
Performed by 1.4.2.0 Software version.

Platform: _GENERAL RESET FRP METHODS
Selected model: MTK CUSTOM
Selected Preloader: E:\VOLACOBOX FILE\HUAWEI TIT-U02C328B107\Software\USB upgrade\TIT-U02C328B107\preloader_TIT-U02.bin
Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.1
Sending Download Agent...
Operation was failed!
Performed by 1.4.2.0 Software version.

Platform: _GENERAL RESET FRP METHODS
Selected model: MTK CUSTOM
Selected Preloader: E:\VOLACOBOX FILE\HUAWEI TIT-U02C328B107\Software\USB upgrade\TIT-U02C328B107\preloader_TIT-U02.bin
Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.1
Sending Download Agent...
Operation was failed!
Performed by 1.4.2.0 Software version.

Platform: _GENERAL RESET FRP METHODS
Selected model: MTK CUSTOM
Selected Download Agent: E:\VOLACOBOX FILE\HUAWEI TIT-U02C328B107\Software\Upgrade tools&drivers\SP_Flash_Tool_exe_Windows_v5.1528.00.000_1113\DA\DA_SWSEC.bin
Selected Preloader: E:\VOLACOBOX FILE\HUAWEI TIT-U02C328B107\Software\USB upgrade\TIT-U02C328B107\preloader_TIT-U02.bin
Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.4
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473265.0507293B.564B149B
eMMC Flash: Hynix: HAG2e
DA ver: 4.2.87
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15032 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: HUAWEI
Model: HUAWEI TIT-U02
Device: HWTIT-U6582
Platform: mt6582
Android version: 5.1
Display ID: TIT-U02C328B107
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_HUAWEI TIT-U02_26-09-2018_11-01-40.dump file
Performed by 1.4.2.0 Software version.

HUAWEI_HUAWEI T*T-U02_26-09-2018_11-01-40

Last edited by Octopus box; 09-26-2018 at 10:48.
  Reply With Quote
Old 09-26-2018, 10:14   #1701 (permalink)
No Life Poster
 
islamic.tj's Avatar
 
Join Date: Mar 2011
Location: Tadjikistan, Dushanbe
Age: 35
Posts: 552
Member: 1533366
Status: Offline
Thanks Meter: 131
REDMI S2 FRP Removed

REDMI S2 FRP Removed:

Quote:
Welcome to Octoplus FRP Tool v.1.4.2.0
Platform: XIAOMI
Selected model: REDMI S2
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi S2
Device: ysl
Android version: 8.1.0
Display ID: OPM1.171019.011
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as XIAOMI_REDMI S2_26-09-2018_14-09-13.dump file
Performed by 1.4.2.0 Software version.

Last edited by Octopus box; 09-26-2018 at 10:44.
  Reply With Quote
The Following User Says Thank You to islamic.tj For This Useful Post:
Old 09-26-2018, 11:23   #1702 (permalink)
Freak Poster
 
Join Date: Nov 2012
Location: Lagos, Nigeria
Posts: 314
Member: 1846240
Status: Offline
Thanks Meter: 86
Thumbs up 🐙 Samsung SM-G570F Reset FRP successfully done

INFO : 9/22/2018 2:19:00 PM > Platform: SAMSUNG
INFO : 9/22/2018 2:19:00 PM > Selected model: SM-G570F
INFO : 9/22/2018 2:19:00 PM > Searching for UART interface..
INFO : 9/22/2018 2:19:00 PM > COM20
WARN : 9/22/2018 2:19:01 PM > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 9/22/2018 2:19:01 PM > Searching for device. Please wait...
INFO : 9/22/2018 2:19:11 PM > Phone found.
INFO : 9/22/2018 2:19:11 PM > Rebooting phone in Upload Mode...
INFO : 9/22/2018 2:19:12 PM > OK
WARN : 9/22/2018 2:19:15 PM > Please connect phone to USB cable..
INFO : 9/22/2018 2:19:15 PM > Searching for a phone. Please wait...
INFO : 9/22/2018 2:19:37 PM > OK
INFO : 9/22/2018 2:19:37 PM > Reading data...
INFO : 9/22/2018 2:19:42 PM > Checking operation...
INFO : 9/22/2018 2:19:42 PM > OK
INFO : 9/22/2018 2:19:42 PM > Searching for UART interface..
INFO : 9/22/2018 2:19:42 PM > COM20
WARN : 9/22/2018 2:19:42 PM > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 9/22/2018 2:19:42 PM > Searching for device. Please wait...
INFO : 9/22/2018 2:20:35 PM > Phone found.
INFO : 9/22/2018 2:20:35 PM > Resetting FRP lock (1/4 attempt)..
SUCC : 9/22/2018 2:21:42 PM > success
WARN : 9/22/2018 2:21:42 PM > FRP lock is successfully reseted!
INFO : 9/22/2018 2:21:42 PM > Performed by 1.4.2.0 Software version.

Last edited by Octopus box; 09-26-2018 at 11:38.
  Reply With Quote
The Following User Says Thank You to Biscosunny For This Useful Post:
Old 09-26-2018, 12:49   #1703 (permalink)
No Life Poster
 
Safyan sufi's Avatar
 
Join Date: Jul 2014
Location: EARTH
Posts: 590
Member: 2221849
Status: Offline
Sonork: offline
Thanks Meter: 279
Zte v0720 frp remove done

ZTE V0720 FRP REMOVE DONE ONE CLICK

LOGS
Code:
Welcome to Octoplus FRP Tool v.1.4.2.0
Platform: ZTE
Selected model: V0720
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM154
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E31324D.42069B25.2290A4D5
eMMC Flash: Samsung: FN12MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: ZTE
Model: ZTE BLADE V0720
Device: ZTE_BLADE_V0720
Platform: mt6735m
Android version: 6.0
Display ID: ZTE_BLADE_V0720_B02
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ZTE_V0720_26-09-2018_13-45-11.dump file
Performed by 1.4.2.0 Software version.
  Reply With Quote
The Following User Says Thank You to Safyan sufi For This Useful Post:
Old 09-26-2018, 14:41   #1704 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 44
Posts: 2,727
Member: 75408
Status: Offline
Thanks Meter: 1,190
SM-J530FM Reset FRP successfully done

SM-J530FM Reset FRP successfully done:

Code:
Welcome to Octoplus FRP Tool v.1.4.2.0
Platform: SAMSUNG
Selected model: SM-J530FM
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging..
Reading info...
Detected phone model: SM-J530FM
Firmware compiled date: Tue Mar 27 11:13:59 KST 2018
PDA version: J530FMXXU3ARC1
CSC version: J530FMOXY3ARA1
SW version: J530FMXXU3ARA2
Phone SN: RF8J93ASW9N
Android version: 7.0 (NRD90M)
Sales code: SEK
Country: Ukraine
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2018-04-01
Codename: j5y17ltexxm
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.4.2.0 Software version.

Last edited by Octopus box; 09-26-2018 at 15:06.
  Reply With Quote
The Following User Says Thank You to Dr_Wolodya For This Useful Post:
Old 09-26-2018, 18:30   #1705 (permalink)
Banned
 
Join Date: Jan 2017
Location: Algeria DZ
Posts: 1,666
Member: 2669781
Status: Offline
Thanks Meter: 1,839
Thumbs up 🐙 Danew Konnect402__{ANDROID 8.1}__FRP smoothly eliminated.....

Full logs of the operation/
Quote:
Code:
Welcome to Octoplus FRP Tool v.1.4.1.0
Platform: _GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .8801034E.43617264.2001070C.652245C5
eMMC Flash: Foresee: NCard 
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Danew
Model: Konnect402
Device: Konnect402
Android version: 8.1.0
Display ID: O11019 dev-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Danew_Konnect402_26-09-2018_18-26-50.dump file
Performed by 1.4.1.0 Software version.

Last edited by Octopus box; 09-27-2018 at 04:35.
  Reply With Quote
The Following 2 Users Say Thank You to lyes_albert For This Useful Post:
Old 09-26-2018, 18:47   #1706 (permalink)
No Life Poster
 
daryl007's Avatar
 
Join Date: Feb 2009
Location: nicaragua
Posts: 548
Member: 980307
Status: Offline
Sonork: 100.1649165
Thanks Meter: 173
Thumbs up 🐙 http://forum.gsmhosting.com/vbb/f1039/post-here-success-reset-frp-story-octoplus-fr

Welcome to Octoplus FRP Tool v.1.4.2.0
Platform: _GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E58324D.42013DC6.6AD3741D
eMMC Flash: Samsung: FNX2MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: BLU
Model: Studio G3
Device: S770P
Platform: mt6580
Android version: 7.0
Display ID: BLU_S770P_V7.0.03.05_GENERIC
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as BLU_Studio G3_26-09-2018_11-44-51.dump file
Performed by 1.4.2.0 Software version.

Last edited by Octopus box; 09-27-2018 at 04:36.
  Reply With Quote
The Following 3 Users Say Thank You to daryl007 For This Useful Post:
Show/Hide list of the thanked
Old 09-26-2018, 22:34   #1707 (permalink)
No Life Poster
 
daryl007's Avatar
 
Join Date: Feb 2009
Location: nicaragua
Posts: 548
Member: 980307
Status: Offline
Sonork: 100.1649165
Thanks Meter: 173
Cool 🐙 BLU_STUDIO SELFIE Reset FRP OK

Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473165.05072AA7.0DCCC221
eMMC Flash: Hynix: H8G1e
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: BLU
Model: STUDIO SELFIE
Device: STUDIO_SELFIE
Platform: mt6580
Android version: 5.1
Display ID: BLU_S070Q_V10_GENERIC 12-11-2015 21:00
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as BLU_STUDIO SELFIE_26-09-2018_15-34-58.dump file
Performed by 1.4.2.0 Software version.

Last edited by Octopus box; 09-27-2018 at 04:39.
  Reply With Quote
The Following 3 Users Say Thank You to daryl007 For This Useful Post:
Show/Hide list of the thanked
Old 09-27-2018, 14:21   #1708 (permalink)
No Life Poster
 
Join Date: Sep 2006
Location: Cuba
Posts: 814
Member: 346150
Status: Offline
Sonork: 100.1661091
Thanks Meter: 419
Thumbs up 🐙 Report FRP successfully H873

Platform: LG
Selected model: H873
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
INFO : 26/09/2018 12:34:38 > Searching for a phone. Please wait...
INFO : 26/09/2018 12:34:38 > Found phone on COM33
INFO : 26/09/2018 12:34:38 > Reading info...
Detected phone model: LG-H873
Mode: Emergency
Initializing..
SW version: LGH873AT-01-V15d-CAN-XX-DEC-26-2017-ARB00+0
Android version: 7.0
Platform: msm8996
Reading partition...
Resetting FRP lock..
Detecting writing method...
Trying third method...
Erasing block...
Reading block...FRP lock is successfully reseted!
Performed by 1.4.2.0 Software version.

Last edited by Octopus box; 09-27-2018 at 14:27.
  Reply With Quote
The Following User Says Thank You to windowshu For This Useful Post:
Old 09-27-2018, 14:36   #1709 (permalink)
No Life Poster
 
Join Date: Jan 2009
Posts: 1,189
Member: 955311
Status: Offline
Thanks Meter: 241
LG H933 Reset FRP successfully done

h933 frp removed Done by octopus support help thank you so much

Platform: LG
Selected model: H930
Opening "LG_H933_26-09-2018_16-12-47.dump"...
Restore device from backup file?
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Connecting...
Reading info...
QC HW ID: 0005E0E100310000
QC CPU: Snapdragon 835 MSM8998
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Checking request..
Reading partition...
Reading info...
Brand: lge
Model: LG-H933
Device: joan
Platform: msm8998
Android version: 8.0.0
Display ID: OPR1.170623.026
Restoring BOOT...
Rebooting phone
Backup saved as LG_H930_27-09-2018_09-19-43.dump file
FRP lock is successfully reseted!
Performed by 1.4.3.0 Software version.
  Reply With Quote
The Following User Says Thank You to maazi For This Useful Post:
Old 09-27-2018, 15:10   #1710 (permalink)
No Life Poster
 
Join Date: Aug 2006
Location: gsmchaudhrayarshad
Age: 43
Posts: 6,993
Member: 328688
Status: Offline
Thanks Meter: 2,282
Donate money to this user
Thumbs up 🐙 IGO Flair one click Reset FRP done

here log


Code:
Welcome to Octoplus FRP Tool v.1.4.3.0
Platform: _GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.3732324D.42004F44.E4E4B3E7
eMMC Flash: Samsung: F722MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: IGO
Model: Flair
Device: IGO_Flair
Platform: mt6580
Android version: 5.1
Display ID: IGO_Flair_ZA_SW_V01
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as IGO_Flair_27-09-2018_16-08-17.dump file
Performed by 1.4.3.0 Software version.
  Reply With Quote
The Following 2 Users Say Thank You to CHAUDHRAY ARSHAD For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 13:14.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.34260 seconds with 9 queries

SEO by vBSEO