🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 244 - GSM-Forum

maksudpabel · 03-20-2019, 19:16

thanks octoplus team......

ctccellulaire · 03-20-2019, 20:21

Welcome to Octoplus FRP Tool v.1.6.7.0
Platform: ACER
Selected model: T08
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM54
Detecting Chip Version...
HW Chip: MT6735: 0321.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473265.05071668.5C4D13DF
eMMC Flash: Hynix: HAG2e
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15032 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: acer
Model: T08
Device: acer_t08
Platform: mt6735
Android version: 6.0
Display ID: Acer_AV0M0_T08_1.012.00_PA_GEN1
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ACER_T08_20-03-2019_12-19-20.dump file
Performed by 1.6.7.0 Software version.

ctccellulaire · 03-20-2019, 23:31

Platform: MOTOROLA
Selected model: XT1670
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Nov 14 2017
Firmware released time: 08:26:59
Firmware compiled date: Nov 13 2017
Firmware compiled time: 08:00:00
SW version: MPSS.JO.2.0.c1.8-00029-8937_GENNS_PACK-1.119758.2.124223.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPPS25.137-93-4
Date: Wed Jan 24 01:20:53 CST 2018
Android version: 7.0
Baseband M8937_22.29.02.56R CEDRIC_LATAM_CUST
Detected phone model: XT1670
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.6.7.0 Software version.

ctccellulaire · 03-20-2019, 23:31

Platform: MOTOROLA
Selected model: XT1670
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Nov 14 2017
Firmware released time: 08:26:59
Firmware compiled date: Nov 13 2017
Firmware compiled time: 08:00:00
SW version: MPSS.JO.2.0.c1.8-00029-8937_GENNS_PACK-1.119758.2.124223.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPPS25.137-93-4
Date: Wed Jan 24 01:20:53 CST 2018
Android version: 7.0
Baseband M8937_22.29.02.56R CEDRIC_LATAM_CUST
Detected phone model: XT1670
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.6.7.0 Software version.

Yahia_Sb · 03-21-2019, 08:03

Welcome to Octoplus FRP Tool v.1.6.7.0
Platform: WE
Selected model: F20
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM4
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.3331334D.42060E9A.54EC92B3
eMMC Flash: Samsung: Q313MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: WE
Model: WE V3
Device: t591_dg_a57_bd_we
Platform: mt6580
Android version: 7.0
Display ID: WE-V3-3G-Android7.0-20170516
Searching for signatures...
FRP signature not found!
Backup saved as WE_F20_21-03-2019_12-58-26.dump file
Performed by 1.6.7.0 Software version.

apacheadmiral · 03-21-2019, 08:18

BOOST PULSE GLIDE FRP lock is successfully reseted!

Platform: BOOST
Selected model: PULSE GLIDE
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM747
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Boost
Model: Pulse Glide
Device: PulseGlide
Platform: sc8830
Android version: 7.0
Display ID: NRD90M release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as BOOST_PULSE GLIDE_21-03-2019_09-16-59.dump file
Performed by 1.6.7.0 Software version.

apacheadmiral · 03-21-2019, 08:19

BOOST PULSE GLIDE FRP lock is successfully reseted!

Platform: BOOST
Selected model: PULSE GLIDE
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM747
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Boost
Model: Pulse Glide
Device: PulseGlide
Platform: sc8830
Android version: 7.0
Display ID: NRD90M release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as BOOST_PULSE GLIDE_21-03-2019_09-16-59.dump file
Performed by 1.6.7.0 Software version.

himig_natin · 03-21-2019, 08:29

Welcome to Octoplus FRP Tool v.1.6.7.0
Platform: __GENERAL RESET FRP METHODS
Selected model: ADB
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: Sony 601SO
SW version: 39.2.D.0.361
Date: Thu Aug 23 11:24:04 JST 2018
Android version: 7.0
Baseband 8996-8996.gen.prodQ-00040-21
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.6.7.0 Software version.

ben_123 · 03-21-2019, 10:02

https://i.postimg.cc/3w0WMR1m/huawei-cun-l02-frp.png

louka · 03-21-2019, 10:18

Welcome to Octoplus FRP Tool v.1.6.7.0
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM166
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4536324D.42030B13.D37ADEB5
eMMC Flash: Samsung: FE62MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: IRIS
Model: VOX POP Pro
Device: VOX_POP_Pro
Android version: 8.1.0
Display ID: IRIS_VOX_POP_Pro_V05_20180828
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as IRIS_VOX POP Pro_21-03-2019_09-56-47.dump file
Performed by 1.6.7.0 Software version.

sefiu1 · 03-21-2019, 12:35

FRP DONE ON 5059A
ENABLE ADB FROM RECOVERY MODE VOLUME UP AND POWER
LATER USE ADB FRP FROM OCTOPUS

Platform: __GENERAL RESET FRP METHODS
Selected model: ADB
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: TCL 5059A
SW version: O11019
Date: Mon Jul 16 18:57:28 CST 2018
Android version: 8.1.0
Baseband MOLY.LR12A.R2.MP.V18.P78
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.6.0.0 Software version.

THANKS

wahiditunes · 03-21-2019, 17:33

Welcome to Octoplus FRP Tool v.1.6.7.0
Platform: LENOVO
Selected model: K33A42
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM114
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0004F0E100007A2A
QC CPU: Snapdragon 430 MSM8937
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo K33
Device: K33
Platform: msm8937
Android version: 6.0.1
Display ID: K33_S156_170220_ROW
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as LENOVO_K33A42_21-03-2019_19-07-58.dump file
Performed by 1.6.7.0 Software version.

ribbentrop · 03-21-2019, 19:19

Google account has been removed w\o problem )))

Code:

INFO  : 21.03.2019 20:00:17 > Welcome to Octoplus FRP Tool v.1.6.8.0
INFO  : 21.03.2019 20:01:38 > Platform: XIAOMI
INFO  : 21.03.2019 20:01:38 > Selected model: MI A2
WARN  : 21.03.2019 20:01:38 > Put the phone into EDL mode: 
WARN  : 21.03.2019 20:01:38 > 1. Attach testpoint as shown in Help manual; 
WARN  : 21.03.2019 20:01:38 > 2. Connect USB cable; 
WARN  : 21.03.2019 20:01:38 > 3. Release testpoint after 3-5 seconds.
INFO  : 21.03.2019 20:01:38 > Searching for a phone. Please wait...
INFO  : 21.03.2019 20:01:38 > Found phone on COM13
INFO  : 21.03.2019 20:01:38 > Mode: Qualcomm 9008
INFO  : 21.03.2019 20:01:39 > Connecting...
INFO  : 21.03.2019 20:01:41 > Reading info...
INFO  : 21.03.2019 20:01:41 > QC HW ID: 0008C0E100000000
INFO  : 21.03.2019 20:01:41 > QC CPU: Snapdragon 660 SDM660
INFO  : 21.03.2019 20:01:41 > QC SW VER: 00000002
INFO  : 21.03.2019 20:01:41 > Searching loader...
INFO  : 21.03.2019 20:01:43 > Sending loaders...
INFO  : 21.03.2019 20:02:00 > Loader send successfuly.
INFO  : 21.03.2019 20:02:00 > Reconnecting...
INFO  : 21.03.2019 20:02:11 > Checking request..
INFO  : 21.03.2019 20:02:12 > Reading partition...
INFO  : 21.03.2019 20:02:12 > Reading info...
INFO  : 21.03.2019 20:02:12 > Searching for signatures...
INFO  : 21.03.2019 20:02:12 > Resetting FRP lock..
WARN  : 21.03.2019 20:02:13 > FRP lock is successfully reseted!
INFO  : 21.03.2019 20:02:13 > Rebooting phone
INFO  : 21.03.2019 20:02:15 > Backup saved as XIAOMI_MI A2_21-03-2019_20-01-38.dump file
INFO  : 21.03.2019 20:02:15 > Performed by 1.6.8.0 Software version.
INFO  : 21.03.2019 20:02:15 >

Yahia_Sb · 03-22-2019, 05:20

Welcome to Octoplus FRP Tool v.1.6.7.0
Platform: MAXIMUS
Selected model: P7
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM4
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
eMMC Flash: .11010030.30384733.3000DB69.CA4BB237
eMMC Flash: Toshiba: 008G30
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Maximus
Model: P7
Device: P7
Android version: 8.1.0
Display ID: GP_MAXIMUS_BD_P7_V09_20181116
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as MAXIMUS_P7_22-03-2019_10-19-33.dump file
Performed by 1.6.7.0 Software version.

Gsm_Flash Baba · 03-22-2019, 05:47

(World 1st) We A50 8.1.0 (SPD CPU)FRP REMOVE DONE ONE CLICK
---------------------------------------------------------------------------------

Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731E SIGN V1
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM19
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: WE
Model: WE A50
Device: A50
Android version: 8.1.0
Custom build version: WE_A50_HW1_SW9
Internal build version: K120AG_8.1_WE_BD_11
Display ID: OPM2.171019.012 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as __GENERAL RESET FRP METHODS_SC7731E SIGN V1_22-03-2019_10-39-06.dump file
Performed by 1.6.7.0 Software version.

03-20-2019, 19:16	#3646 (permalink)
maksudpabel Major Poster Join Date: Jun 2008 Location: france Posts: 40 Member: 799712 Status: Offline Thanks Meter: 13	zte blade a512 frp unlock successed ..... thanks octoplus team......

03-21-2019, 08:29	#3653 (permalink)
himig_natin Freak Poster Join Date: Oct 2010 Location: USA Posts: 350 Member: 1420095 Status: Offline Thanks Meter: 216	Sony Xperia XZ (601SO) FRP Done.. Welcome to Octoplus FRP Tool v.1.6.7.0 Platform: __GENERAL RESET FRP METHODS Selected model: ADB Searching for a phone (waiting for ADB device)... Phone found. Reading info... Phone model: Sony 601SO SW version: 39.2.D.0.361 Date: Thu Aug 23 11:24:04 JST 2018 Android version: 7.0 Baseband 8996-8996.gen.prodQ-00040-21 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.6.7.0 Software version.

03-21-2019, 10:02	#3654 (permalink)
ben_123 Freak Poster Join Date: May 2009 Location: san fernando city la union Posts: 128 Member: 1028799 Status: Offline Thanks Meter: 49	huawei CUN-L02 frp reset https://i.postimg.cc/3w0WMR1m/huawei-cun-l02-frp.png

03-21-2019, 10:18	#3655 (permalink)
louka No Life Poster Join Date: Nov 2005 Posts: 947 Member: 198016 Status: Offline Sonork: 100.1602918 Thanks Meter: 408	Iris pop pro FRP lock is successfully reseted Welcome to Octoplus FRP Tool v.1.6.7.0 Platform: __GENERAL RESET FRP METHODS Selected model: MTK GENERAL Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM166 Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CB00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 02 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4536324D.42030B13.D37ADEB5 eMMC Flash: Samsung: FE62MB DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: IRIS Model: VOX POP Pro Device: VOX_POP_Pro Android version: 8.1.0 Display ID: IRIS_VOX_POP_Pro_V05_20180828 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as IRIS_VOX POP Pro_21-03-2019_09-56-47.dump file Performed by 1.6.7.0 Software version.

03-22-2019, 05:47	#3660 (permalink)
Gsm_Flash Baba Insane Poster Join Date: Aug 2017 Location: Dhaka. Bangladesh Posts: 83 Member: 2743172 Status: Offline Sonork: Gsmhosting Thanks Meter: 39	(World 1st) We A50 8.1.0 (SPD CPU)FRP REMOVE DONE ONE CLICK (World 1st) We A50 8.1.0 (SPD CPU)FRP REMOVE DONE ONE CLICK --------------------------------------------------------------------------------- Platform: __GENERAL RESET FRP METHODS Selected model: SC7731E SIGN V1 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM19 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: WE Model: WE A50 Device: A50 Android version: 8.1.0 Custom build version: WE_A50_HW1_SW9 Internal build version: K120AG_8.1_WE_BD_11 Display ID: OPM2.171019.012 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as __GENERAL RESET FRP METHODS_SC7731E SIGN V1_22-03-2019_10-39-06.dump file Performed by 1.6.7.0 Software version.

03-20-2019, 20:21	#3647 (permalink)
ctccellulaire Freak Poster Join Date: Dec 2014 Location: PCB Posts: 315 Member: 2320407 Status: Offline Thanks Meter: 88	Welcome to Octoplus FRP Tool v.1.6.7.0 Platform: ACER Selected model: T08 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM54 Detecting Chip Version... HW Chip: MT6735: 0321.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.41473265.05071668.5C4D13DF eMMC Flash: Hynix: HAG2e DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15032 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: acer Model: T08 Device: acer_t08 Platform: mt6735 Android version: 6.0 Display ID: Acer_AV0M0_T08_1.012.00_PA_GEN1 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as ACER_T08_20-03-2019_12-19-20.dump file Performed by 1.6.7.0 Software version.

03-20-2019, 23:31	#3648 (permalink)
ctccellulaire Freak Poster Join Date: Dec 2014 Location: PCB Posts: 315 Member: 2320407 Status: Offline Thanks Meter: 88	Platform: MOTOROLA Selected model: XT1670 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8937.gen Firmware released date: Nov 14 2017 Firmware released time: 08:26:59 Firmware compiled date: Nov 13 2017 Firmware compiled time: 08:00:00 SW version: MPSS.JO.2.0.c1.8-00029-8937_GENNS_PACK-1.119758.2.124223.1 Enabling "USB Debugging" mode... Searching for a phone. Please wait... Enabling "USB Debugging" mode... Put the phone in Factory Mode: 1. Disconnect USB cable; 2. Power OFF the phone; 3. Press "Vol-" and "Power" buttons; 4. Select Factory Mode then confirm your selection; 5. Wait until phone is power ON and connect USB Cable; 6. Install necesarry drivers then press "OK" button Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB device)... Phone found. Reading info... Phone model: motorola Moto G (5) SW version: NPPS25.137-93-4 Date: Wed Jan 24 01:20:53 CST 2018 Android version: 7.0 Baseband M8937_22.29.02.56R CEDRIC_LATAM_CUST Detected phone model: XT1670 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.6.7.0 Software version.

03-20-2019, 23:31	#3649 (permalink)
ctccellulaire Freak Poster Join Date: Dec 2014 Location: PCB Posts: 315 Member: 2320407 Status: Offline Thanks Meter: 88	Platform: MOTOROLA Selected model: XT1670 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: 8937.gen Firmware released date: Nov 14 2017 Firmware released time: 08:26:59 Firmware compiled date: Nov 13 2017 Firmware compiled time: 08:00:00 SW version: MPSS.JO.2.0.c1.8-00029-8937_GENNS_PACK-1.119758.2.124223.1 Enabling "USB Debugging" mode... Searching for a phone. Please wait... Enabling "USB Debugging" mode... Put the phone in Factory Mode: 1. Disconnect USB cable; 2. Power OFF the phone; 3. Press "Vol-" and "Power" buttons; 4. Select Factory Mode then confirm your selection; 5. Wait until phone is power ON and connect USB Cable; 6. Install necesarry drivers then press "OK" button Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB device)... Phone found. Reading info... Phone model: motorola Moto G (5) SW version: NPPS25.137-93-4 Date: Wed Jan 24 01:20:53 CST 2018 Android version: 7.0 Baseband M8937_22.29.02.56R CEDRIC_LATAM_CUST Detected phone model: XT1670 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.6.7.0 Software version.

03-21-2019, 08:03	#3650 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Welcome to Octoplus FRP Tool v.1.6.7.0 Platform: WE Selected model: F20 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM4 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.3331334D.42060E9A.54EC92B3 eMMC Flash: Samsung: Q313MB DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: WE Model: WE V3 Device: t591_dg_a57_bd_we Platform: mt6580 Android version: 7.0 Display ID: WE-V3-3G-Android7.0-20170516 Searching for signatures... FRP signature not found! Backup saved as WE_F20_21-03-2019_12-58-26.dump file Performed by 1.6.7.0 Software version.

03-21-2019, 08:18	#3651 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	BOOST PULSE GLIDE FRP lock is successfully reseted! Platform: BOOST Selected model: PULSE GLIDE Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM747 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Boost Model: Pulse Glide Device: PulseGlide Platform: sc8830 Android version: 7.0 Display ID: NRD90M release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as BOOST_PULSE GLIDE_21-03-2019_09-16-59.dump file Performed by 1.6.7.0 Software version.

03-21-2019, 08:19	#3652 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	BOOST PULSE GLIDE FRP lock is successfully reseted! Platform: BOOST Selected model: PULSE GLIDE Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM747 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Boost Model: Pulse Glide Device: PulseGlide Platform: sc8830 Android version: 7.0 Display ID: NRD90M release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as BOOST_PULSE GLIDE_21-03-2019_09-16-59.dump file Performed by 1.6.7.0 Software version.

03-21-2019, 12:35	#3656 (permalink)
sefiu1 No Life Poster Join Date: May 2013 Posts: 566 Member: 1930570 Status: Offline Thanks Meter: 82	FRP DONE ON 5059A ENABLE ADB FROM RECOVERY MODE VOLUME UP AND POWER LATER USE ADB FRP FROM OCTOPUS Platform: __GENERAL RESET FRP METHODS Selected model: ADB Searching for a phone (waiting for ADB device)... Phone found. Reading info... Phone model: TCL 5059A SW version: O11019 Date: Mon Jul 16 18:57:28 CST 2018 Android version: 8.1.0 Baseband MOLY.LR12A.R2.MP.V18.P78 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.6.0.0 Software version. THANKS

03-21-2019, 17:33	#3657 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	Welcome to Octoplus FRP Tool v.1.6.7.0 Platform: LENOVO Selected model: K33A42 Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Searching for a phone. Please wait... Found phone on COM114 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 0004F0E100007A2A QC CPU: Snapdragon 430 MSM8937 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Lenovo Model: Lenovo K33 Device: K33 Platform: msm8937 Android version: 6.0.1 Display ID: K33_S156_170220_ROW Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Rebooting phone Backup saved as LENOVO_K33A42_21-03-2019_19-07-58.dump file Performed by 1.6.7.0 Software version.

03-22-2019, 05:20	#3659 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Welcome to Octoplus FRP Tool v.1.6.7.0 Platform: MAXIMUS Selected model: P7 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM4 Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb eMMC Flash: .11010030.30384733.3000DB69.CA4BB237 eMMC Flash: Toshiba: 008G30 Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Maximus Model: P7 Device: P7 Android version: 8.1.0 Display ID: GP_MAXIMUS_BD_P7_V09_20181116 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as MAXIMUS_P7_22-03-2019_10-19-33.dump file Performed by 1.6.7.0 Software version.