GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 04-26-2019, 08:20   #3901 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: GENCI-TITI POGRADEC ALBANIA
Posts: 3,339
Member: 193804
Status: Offline
Sonork: 100.1659400
Thanks Meter: 1,098
Wink PRA-LX1 FRP lock is successfully reseted!


Welcome to Octoplus FRP Tool v.1.6.9.0
Platform: HUAWEI
Selected model: PRA-LX1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: PRA-LX1
Phone SN: 9DC7N17B07044055
Phone IMEI: 867572030909592
Phone IMEI2: 867572030939607
SW version: PRA-LX1 8.0.0.401(C432)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.9.0 Software version.
  Reply With Quote
Old 04-26-2019, 09:02   #3902 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: GENCI-TITI POGRADEC ALBANIA
Posts: 3,339
Member: 193804
Status: Offline
Sonork: 100.1659400
Thanks Meter: 1,098
Wink Xiaomi Redmi 5 FRP lock is successfully reseted!

Platform: XIAOMI
Selected model: REDMI 5
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0009A0E100000000
QC CPU: Snapdragon 450 SDM450
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 5
Device: rosy
Platform: msm8953
Android version: 8.1.0
Display ID: CUSTOMER_VERSION_rosy
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as XIAOMI_REDMI 5_26-04-2019_10-03-07.dump file
Performed by 1.6.9.0 Software version.
  Reply With Quote
Old 04-26-2019, 09:11   #3903 (permalink)
Freak Poster
 
Join Date: Jun 2017
Location: SAUDI ARABIA RIYADH
Posts: 324
Member: 2725078
Status: Offline
Sonork: 1680162
Thanks Meter: 164
Welcome to Octoplus FRP Tool v.1.7.0.0
Platform: LENOVO
Selected model: A2020A40
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM114
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009600E100000000
QC CPU: Snapdragon 210 MSM8909
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo A2020a40
Device: angus3A4
Platform: msm8909
Android version: 5.1.1
Display ID: A2020a40_S189_161109_ROW
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as Lenovo_Lenovo A2020a40_26-04-2019_11-09-10.dump file
Performed by 1.7.0.0 Software version.
  Reply With Quote
Old 04-26-2019, 11:22   #3904 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: In the paradise
Posts: 1,807
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 784
Platform: XIAOMI
Selected model: REDMI 5A
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM63
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100000000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 5A
Device: riva
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as Xiaomi_Redmi 5A_26-04-2019_11-14-54.dump file
Performed by 1.7.0.0 Software version.
  Reply With Quote
Old 04-26-2019, 11:29   #3905 (permalink)
Junior Member
 
Join Date: Mar 2018
Posts: 15
Member: 2820753
Status: Offline
Thanks Meter: 3
RESET FRP SAMSUNG J500FN

  Reply With Quote
Old 04-26-2019, 11:35   #3906 (permalink)
Junior Member
 
Join Date: Mar 2018
Posts: 15
Member: 2820753
Status: Offline
Thanks Meter: 3
RESET FRP DOGEE X11
eamon boys name
  Reply With Quote
Old 04-26-2019, 13:07   #3907 (permalink)
Freak Poster
 
Join Date: Aug 2014
Posts: 167
Member: 2233266
Status: Offline
Thanks Meter: 45
Welcome to Octoplus FRP Tool v.1.6.9.0
Platform: SYMPHONY
Selected model: G100
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010038.47544634.5206919C.8C5DC5D1
eMMC Flash: Samsung: 8GTF4R
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Symphony
Model: V142
Device: V142
Android version: 8.1.0
Display ID: V142_HW1_V7
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as SYMPHONY_G100_26-04-2019_18-06-09.dump file
Performed by 1.6.9.0 Software version.
  Reply With Quote
Old 04-26-2019, 14:19   #3908 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside Octoplus Team
Posts: 1,386
Member: 455852
Status: Online
Sonork: 100.1596308
Thanks Meter: 482
INOI 2 Reset FRP DONE

Welcome to Octoplus FRP Tool v.1.7.0.0
Platform: INOI
Selected model: 2
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM66
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.13
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .1F010053.55503831.304A3113.348E23F9
eMMC Flash: Unknown: SUP810
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7492 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: INOI
Model: INOI_2
Device: INOI_2
Platform: mt6737m
Android version: 7.0
Display ID: t961be_v1_bh_tyc_gm50h1_v11_20180514
Searching for signatures...
FRP signature not found!
Backup saved as INOI_INOI_2_26-04-2019_18-16-46.dump file
Performed by 1.7.0.0 Software version.
  Reply With Quote
Old 04-26-2019, 14:19   #3909 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside Octoplus Team
Posts: 1,386
Member: 455852
Status: Online
Sonork: 100.1596308
Thanks Meter: 482
INOI 2 Reset FRP DONE

Welcome to Octoplus FRP Tool v.1.7.0.0
Platform: INOI
Selected model: 2
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM66
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.13
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .1F010053.55503831.304A3113.348E23F9
eMMC Flash: Unknown: SUP810
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7492 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: INOI
Model: INOI_2
Device: INOI_2
Platform: mt6737m
Android version: 7.0
Display ID: t961be_v1_bh_tyc_gm50h1_v11_20180514
Searching for signatures...
FRP signature not found!
Backup saved as INOI_INOI_2_26-04-2019_18-16-46.dump file
Performed by 1.7.0.0 Software version.
  Reply With Quote
Old 04-26-2019, 20:03   #3910 (permalink)
No Life Poster
 
Punto-Móvil's Avatar
 
Join Date: Oct 2009
Location: GRAN ALACANT SPAIN
Posts: 704
Member: 1147852
Status: Offline
Sonork: 1602463
Thanks Meter: 277
Meizu m3 note frp reset done

Welcome to Octoplus FRP Tool v.1.7.0.0
Platform: MEIZU
Selected model: M3 NOTE (L681H)
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM57
Detecting Chip Version...
HW Chip: MT6755: 0326.0000
HW Version: 8A00.CB00.0001.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x00000007
Start Authentication...
Connecting to server..OK
Authorizing...OK
Initializing..OK
Calculating...
Authentication done!
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.18
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010052.5831424D.4207E380.AA446359
eMMC Flash: Samsung: RX1BMB
Internal RAM size: 320 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Meizu
Model: m3 note
Device: m3note
Platform: mt6755
Android version: 5.1
Display ID: Flyme 6.2.0.0G
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Meizu_m3 note_26-04-2019_19-37-01.dump file
Performed by 1.7.0.0 Software version.
  Reply With Quote
Old 04-27-2019, 15:54   #3911 (permalink)
Freak Poster
 
Join Date: Aug 2014
Posts: 167
Member: 2233266
Status: Offline
Thanks Meter: 45
walton rx6 frp done

Welcome to Octoplus FRP Tool v.1.6.9.0
Platform: WALTON
Selected model: PRIMO RX6
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM145
Detecting Chip Version...
HW Chip: MT6735: 0321.0000
HW Version: 8A00.CC00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473461.32A43498.5043107F
eMMC Flash: Hynix: HAG4a2
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
Internal RAM size: 128 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: Walton
Model: Primo RX6
Device: Primo_RX6
Android version: 8.1.0
Display ID: Walton_Primo_RX6_V06
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as WALTON_PRIMO RX6_27-04-2019_20-52-07.dump file
Performed by 1.6.9.0 Software version.
  Reply With Quote
Old 04-27-2019, 18:12   #3912 (permalink)
Freak Poster
 
Join Date: Apr 2008
Posts: 179
Member: 746586
Status: Offline
Thanks Meter: 8
VODAFONE VFD320 FRP lock is successfully reseted!

Platform: VODAFONE
Selected model: VFD320
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM15
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010045.45344544.34011747.C38C65DD
eMMC Flash: Pretec: EE4ED4
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 2 Mb
EMMC boot2 size: 2 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3616 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Vodafone
Model: VFD320
Device: VFD320
Platform: mt6580
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Vodafone_VFD320_27-04-2019_19-09-59.dump file
Performed by 1.7.0.0 Software version.
  Reply With Quote
Old 04-27-2019, 18:13   #3913 (permalink)
Freak Poster
 
Join Date: Apr 2008
Posts: 179
Member: 746586
Status: Offline
Thanks Meter: 8
VODAFONE VFD320 FRP lock is successfully reseted!

Platform: VODAFONE
Selected model: VFD320
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM15
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010045.45344544.34011747.C38C65DD
eMMC Flash: Pretec: EE4ED4
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 2 Mb
EMMC boot2 size: 2 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3616 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Vodafone
Model: VFD320
Device: VFD320
Platform: mt6580
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Vodafone_VFD320_27-04-2019_19-09-59.dump file
Performed by 1.7.0.0 Software version.
  Reply With Quote
Old 04-27-2019, 18:23   #3914 (permalink)
Freak Poster
 
Join Date: Apr 2008
Posts: 179
Member: 746586
Status: Offline
Thanks Meter: 8
HUAWEI LDN-L21 FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.7.0.0
Platform: HUAWEI
Selected model: LDN-L21
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LDN-L21
Phone SN: BSUBB18A26150138
Phone IMEI: 867240035987209
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.7.0.0 Software version.
  Reply With Quote
Old 04-27-2019, 18:23   #3915 (permalink)
Freak Poster
 
Join Date: Apr 2008
Posts: 179
Member: 746586
Status: Offline
Thanks Meter: 8
HUAWEI LDN-L21 FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.7.0.0
Platform: HUAWEI
Selected model: LDN-L21
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LDN-L21
Phone SN: BSUBB18A26150138
Phone IMEI: 867240035987209
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.7.0.0 Software version.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 06:16.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.20548 seconds with 8 queries

SEO by vBSEO