GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 10-20-2019, 10:19   #4951 (permalink)
No Life Poster
 
marcin7904's Avatar
 
Join Date: Jun 2006
Location: Poland Pruszków-Warszawa-Warka
Posts: 1,038
Member: 290272
Status: Offline
Thanks Meter: 320
Donate money to this user
Samsung S7 SM-G930F


Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: SAMSUNG
Selected model: SM-G930F
To put SM-G930F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM10
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-20-2019, 10:31   #4952 (permalink)
Insane Poster
 
Join Date: Aug 2018
Posts: 78
Member: 2860421
Status: Offline
Thanks Meter: 13
nokia Ta-1029 reset frp

Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: NOKIA
Selected model: TA-1029
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM66
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009600E100000000
QC CPU: Snapdragon 210 MSM8909
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Unknown
Model: Unknown
Device: Unknown
Platform: msm8909
Android version: 7.1.1
Display ID: 00WW_0_64Q
Firmware version: 00WW_0_64Q
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as Unknown_Unknown_20-10-2019_11-51-25.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-20-2019, 12:35   #4953 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 336
Member: 2924041
Status: Offline
Thanks Meter: 121
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: SYMPHONY
Selected model: G20
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM5
Detecting Chip Version...
HW Chip: MT6570: 0633.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.16
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 2 Mb
EMMC boot2 size: 2 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3616 Mb
eMMC Flash: .7001004D.36323730.34010227.998A54CF
eMMC Flash: Pretec: M62704
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Symphony
Model: G20
Device: G20
Platform: mt6570
Android version: 6.0
Display ID: GP_G20_20170807_HW1_V7
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Symphony_G20_20-10-2019_16-33-31.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-20-2019, 12:35   #4954 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 336
Member: 2924041
Status: Offline
Thanks Meter: 121
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: SYMPHONY
Selected model: G20
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM5
Detecting Chip Version...
HW Chip: MT6570: 0633.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.16
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 2 Mb
EMMC boot2 size: 2 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3616 Mb
eMMC Flash: .7001004D.36323730.34010227.998A54CF
eMMC Flash: Pretec: M62704
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Symphony
Model: G20
Device: G20
Platform: mt6570
Android version: 6.0
Display ID: GP_G20_20170807_HW1_V7
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Symphony_G20_20-10-2019_16-33-31.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-20-2019, 12:52   #4955 (permalink)
Insane Poster
 
Join Date: Mar 2017
Location: Kanpur
Age: 25
Posts: 63
Member: 2698195
Status: Offline
Thanks Meter: 18
HUAWEI MRD-LX1F Frp reset done with Test point.

Platform: HUAWEI
Selected model: MRD-LX1F
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM12
Detecting Chip Version...
HW Chip: MT6761: 0717.0000
HW Version: 8A00.CA01.0200.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010051.4436334D.4201D09D.A840B5D5
eMMC Flash: Samsung: QD63MB
Internal RAM size: 512 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_MRD-LX1F_20-10-2019_16-20-47.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 08:01   #4956 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 3,218
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,546
Donate money to this user
Thumbs up REDMI 4A Mi account+ Frp Done

Platform: XIAOMI
Selected model: REDMI 4A
Please, select one of the options for "Reset Mi Account" operation or press Ok to continue...
Go to "Wi-Fi Settings" and forget connected Wi-Fi network or perform Wipe Data from recovery
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM148
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100000000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 4A
Device: rolex
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Firmware version: V10.2.3.0.NCCMIXM
Resetting Mi Account...
On Your device detected FRP Lock! Reset it?
Reading MI part...
Writing MI part...
Resetting FRP lock..
Rebooting phone
Backup saved as Xiaomi_Redmi 4A_21-10-2019_10-47-52.dump file
Mi Account is successfully reseted!
Performed by 1.8.0.0 Software version.

Platform: XIAOMI
Selected model: REDMI 4A
Please, select one of the options for "Reset Mi Account" operation or press Ok to continue...
Please power phone ON and enable "USB Debugging" then press "OK" button!

If operation wasn't completed, then Your device get re-locked and credits aren't refundable!
Searching for a phone (waiting for ADB device)...
ADB server killed.
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Reading info...
Phone model: Xiaomi Redmi 4A
SW version: N2G47H
Date: Wed Jun 5 18:30:47 WIB 2019
Android version: 7.1.2
Baseband MPSS.JO.3.0-00369-8937_GENNS_PACK-2.149578.1.184164.1_V010
Disabling Mi Services...
Mi Account is successfully reseted!
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 09:07   #4957 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 336
Member: 2924041
Status: Offline
Thanks Meter: 121
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: TECNO
Selected model: W3 PRO
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E58324D.420176C5.0742B4A3
eMMC Flash: Samsung: FNX2MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: TECNO
Model: TECNO W3 Pro
Device: TECNO-W3Pro
Platform: mt6580
Android version: 7.0
Display ID: W3Pro-H8020A-N-SEA-180321V189
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as TECNO_TECNO W3 Pro_21-10-2019_13-03-13.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 12:27   #4958 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: SERVIS CELULAR TITI 2002 PG/AL
Posts: 3,504
Member: 193804
Status: Offline
Sonork: 100.1659400
Thanks Meter: 1,139
Wink SM-J510FN FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: SAMSUNG
Selected model: SM-J510FN
Reset FRP/ Reactivation lock operation for SM-J510FN will delete all user data on the phone (contacts, pictures and others)!

NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J510FN into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Advanced mode!
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
Firmware writing successfully completed.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 12:55   #4959 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 336
Member: 2924041
Status: Offline
Thanks Meter: 121
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: ITEL
Selected model: S11X
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E36324D.4203A111.068DA5C3
eMMC Flash: Samsung: FN62MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Itel
Model: itel S11X
Device: itel-S11X
Android version: 8.1.0
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Itel_itel S11X_21-10-2019_16-54-12.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 14:07   #4960 (permalink)
No Life Poster
 
Join Date: Feb 2018
Location: Nigeria
Posts: 1,227
Member: 2812901
Status: Offline
Thanks Meter: 408
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: TECNO
Selected model: B1P
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM29
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017/12/29.10:21_396299, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E36324D.420366EE.6A55B5C5
eMMC Flash: Samsung: FN62MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: TECNO
Model: TECNO B1p
Device: TECNO-B1p
Android version: 8.1.0
Display ID: B1p-F8017ABGH-OGo-190910V182
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as TECNO_TECNO B1p_14-10-2019_19-39-03.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 14:07   #4961 (permalink)
No Life Poster
 
Join Date: Feb 2018
Location: Nigeria
Posts: 1,227
Member: 2812901
Status: Offline
Thanks Meter: 408
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: TECNO
Selected model: B1P
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM29
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017/12/29.10:21_396299, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E36324D.420366EE.6A55B5C5
eMMC Flash: Samsung: FN62MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: TECNO
Model: TECNO B1p
Device: TECNO-B1p
Android version: 8.1.0
Display ID: B1p-F8017ABGH-OGo-190910V182
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as TECNO_TECNO B1p_14-10-2019_19-39-03.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 14:08   #4962 (permalink)
No Life Poster
 
Join Date: Feb 2018
Location: Nigeria
Posts: 1,227
Member: 2812901
Status: Offline
Thanks Meter: 408
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: TECNO
Selected model: LB8
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM29
Detecting Chip Version...
HW Chip: MT6762: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018/05/22.14:57_437806, n.3
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29856 Mb
eMMC Flash: .70010054.41323833.322312C2.3A377645
eMMC Flash: Pretec: TA2832
Internal RAM size: 256 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: TECNO
Model: TECNO LB8
Device: TECNO-LB8
Android version: 9
Display ID: LB8-H6110ABC-P-190628V167
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as TECNO_TECNO LB8_14-10-2019_19-33-13.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 14:09   #4963 (permalink)
No Life Poster
 
Join Date: Feb 2018
Location: Nigeria
Posts: 1,227
Member: 2812901
Status: Offline
Thanks Meter: 408
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: TECNO
Selected model: LB8
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM29
Detecting Chip Version...
HW Chip: MT6762: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018/05/22.14:57_437806, n.3
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29856 Mb
eMMC Flash: .70010054.41323833.322312C2.3A377645
eMMC Flash: Pretec: TA2832
Internal RAM size: 256 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: TECNO
Model: TECNO LB8
Device: TECNO-LB8
Android version: 9
Display ID: LB8-H6110ABC-P-190628V167
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as TECNO_TECNO LB8_14-10-2019_19-33-13.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 16:01   #4964 (permalink)
No Life Poster
 
marcin7904's Avatar
 
Join Date: Jun 2006
Location: Poland Pruszków-Warszawa-Warka
Posts: 1,038
Member: 290272
Status: Offline
Thanks Meter: 320
Donate money to this user
Motorola XT1622 Moto G4

Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: MOTOROLA
Selected model: XT1622
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8952.gen
Firmware released date: Jan 9 2018
Firmware released time: 03:05:43
Firmware compiled date: Jan 07 2018
Firmware compiled time: 22:00:00
SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.99393.1.131365.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (4)
SW version: NPJS25.93-14-15
Date: Sat Feb 3 12:00:07 CST 2018
Android version: 7.0
Baseband M8952_70030.25.03.62.02R ATHENE_EMEA_DSDS_CUST
Detected phone model: XT1622-DS
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-21-2019, 17:03   #4965 (permalink)
Freak Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 414
Member: 746586
Status: Offline
Thanks Meter: 22
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: MOBICEL
Selected model: R1
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM833
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A533D6.5A2754FF
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Mobicel
Model: Mobicel_R1
Device: Mobicel_R1
Platform: mt6580
Android version: 7.0
Display ID: alps-mp-n0.mp2-V1_tinno6580.we.n_P144
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Mobicel_Mobicel_R1_21-10-2019_17-01-55.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 00:39.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.21488 seconds with 8 queries

SEO by vBSEO