|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Mark Forums Read |
| LinkBack | Thread Tools | Display Modes |
10-22-2019, 10:32 | #4966 (permalink) |
No Life Poster Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | A510f u8 frp done Platform: SAMSUNG Selected model: SM-A510F Searching for UART interface.. COM9 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM9 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Searching for UART interface.. COM9 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..success FRP lock is successfully reseted! Performed by 1.8.0.0 Software version. |
10-22-2019, 10:51 | #4967 (permalink) |
Junior Member Join Date: Jun 2008 Location: France
Posts: 6
Member: 801906 Status: Offline Thanks Meter: 0 | Octopus not frp huawei MAR-LX1A Hi, just for say i buy it but octopus frp tool, but not frp unlock for MAR-LX1A... Its P30 lite so pity. I hope you go to add it in the list. Kind Regards |
10-22-2019, 11:00 | #4968 (permalink) |
No Life Poster Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | J120F Reset FRp DONE Welcome to Octoplus FRP Tool v.1.8.0.0 Platform: SAMSUNG Selected model: SM-J120F Reset FRP/ Reactivation lock operation for SM-J120F will delete all user data on the phone (contacts, pictures and others)! NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service. Connecting to server... Connecting to server...Ok! Checking resource files... Resource files already downloaded. Please put the phone into Download Mode and connect USB cable. To put SM-J120F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Waiting for phone... Advanced mode! Firmware write started. Writing Custom section... Custom section has been written successfully. Firmware writing successfully completed. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.8.0.0 Software version. |
10-22-2019, 11:08 | #4969 (permalink) |
No Life Poster Join Date: Mar 2008 Location: Pakistan
Posts: 899
Member: 720264 Status: Offline Sonork: 100.1649278 Thanks Meter: 192 | Welcome to Octoplus FRP Tool v.1.8.0.0 Platform: ALCATEL Selected model: OT-6044D Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM42 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 0091B0E100000000 QC CPU: Snapdragon 415 MSM8929 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Checking request.. Reading partition... Reading info... Brand: TCL Model: 6044D Device: I1-5_4G Platform: msm8916 Android version: 5.1.1 Display ID: 6044D_AMEA_AP_G05EN_V2.0_160401 Firmware version: 6044D_AMEA_AP_G05EN_V2.0_160401 Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Rebooting phone Backup saved as TCL_6044D_22-10-2019_15-05-07.dump file Performed by 1.8.0.0 Software version. |
10-22-2019, 11:09 | #4970 (permalink) |
No Life Poster Join Date: Mar 2008 Location: Pakistan
Posts: 899
Member: 720264 Status: Offline Sonork: 100.1649278 Thanks Meter: 192 | Welcome to Octoplus FRP Tool v.1.8.0.0 Platform: ALCATEL Selected model: OT-6044D Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM42 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 0091B0E100000000 QC CPU: Snapdragon 415 MSM8929 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Checking request.. Reading partition... Reading info... Brand: TCL Model: 6044D Device: I1-5_4G Platform: msm8916 Android version: 5.1.1 Display ID: 6044D_AMEA_AP_G05EN_V2.0_160401 Firmware version: 6044D_AMEA_AP_G05EN_V2.0_160401 Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Rebooting phone Backup saved as TCL_6044D_22-10-2019_15-05-07.dump file Performed by 1.8.0.0 Software version. |
10-22-2019, 11:32 | #4971 (permalink) |
Freak Poster Join Date: Oct 2010 Location: Europe
Posts: 407
Member: 1429766 Status: Offline Thanks Meter: 85 | Platform: LG Selected model: M160 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Operation was canceled Performed by 1.8.0.0 Software version. Platform: LG Selected model: M160 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM275 Reading info... Detected phone model: LG-M160 Mode: Emergency Initializing.. SW version: LGM160AT-00-V10m-EUR-XX-APR-11-2018+0 Android version: 6.0.1 Platform: msm8909 Reading partition... Detecting writing method... Trying to repeat.. Trying third method... Resetting FRP lock.. Trying to repeat.. Please, flash the M150x-M160x_Android_6.0.x_for_Reset_FRP.oct firmware file from Support Area ("LG/FOR UNLOCK AND REPAIR" folder), and then perform Reset FRP operation. Performed by 1.8.0.0 Software version. Platform: LG Selected model: M160 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM275 Reading info... Detected phone model: LG-M160 Mode: Emergency Initializing.. SW version: LGM160AT-00-V10m-EUR-XX-APR-11-2018+0 Android version: 6.0.1 Platform: msm8909 Writing firmware... Opening "M150x-M160x_Android_6.0.x_for_Reset_FRP.oct"... Writing phone firmware without real necessity is at your own risk. Downgrade may lead to phone damage! Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Prepairing firmware... Setting options... Reading partition... Formating USERDATA section Formating ENCRYPT section Writing signature... Writing 1/2 section... Writing 2/2 section... Reading partition... Formating RCT section Formating MPT section Finalizing... Firmware Write successfully. Performed by 1.8.0.0 Software version. Platform: LG Selected model: M160 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM275 Reading info... Detected phone model: LG-M160 Mode: Emergency Initializing.. SW version: LGM160AT-00-V10m-EUR-XX-APR-11-2018+0 Android version: 6.0.1 Platform: msm8909 Reading partition... Detecting writing method... Trying to repeat.. Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.8.0.0 Software version. |
10-22-2019, 11:32 | #4972 (permalink) |
No Life Poster Join Date: Feb 2007 Location: Inside
Posts: 4,133
Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993 | Pra-la1 Welcome to Octoplus FRP Tool v.1.8.0.0 Platform: HUAWEI Selected model: _TEST-MODE Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: PRA-LA1 Phone SN: PSEDUxcxxxxxxxxxxxxxx Phone IMEI: 8631xxxxxxxxxxxxxxxx Phone IMEI2: 863xxxxxxxxxxxxxxxxx SW version: PRA-LA1C10B100 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.0.0 Software version. |
10-22-2019, 11:32 | #4973 (permalink) |
Freak Poster Join Date: Oct 2010 Location: Europe
Posts: 407
Member: 1429766 Status: Offline Thanks Meter: 85 | Platform: LG Selected model: M160 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Operation was canceled Performed by 1.8.0.0 Software version. Platform: LG Selected model: M160 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM275 Reading info... Detected phone model: LG-M160 Mode: Emergency Initializing.. SW version: LGM160AT-00-V10m-EUR-XX-APR-11-2018+0 Android version: 6.0.1 Platform: msm8909 Reading partition... Detecting writing method... Trying to repeat.. Trying third method... Resetting FRP lock.. Trying to repeat.. Please, flash the M150x-M160x_Android_6.0.x_for_Reset_FRP.oct firmware file from Support Area ("LG/FOR UNLOCK AND REPAIR" folder), and then perform Reset FRP operation. Performed by 1.8.0.0 Software version. Platform: LG Selected model: M160 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM275 Reading info... Detected phone model: LG-M160 Mode: Emergency Initializing.. SW version: LGM160AT-00-V10m-EUR-XX-APR-11-2018+0 Android version: 6.0.1 Platform: msm8909 Writing firmware... Opening "M150x-M160x_Android_6.0.x_for_Reset_FRP.oct"... Writing phone firmware without real necessity is at your own risk. Downgrade may lead to phone damage! Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage. Prepairing firmware... Setting options... Reading partition... Formating USERDATA section Formating ENCRYPT section Writing signature... Writing 1/2 section... Writing 2/2 section... Reading partition... Formating RCT section Formating MPT section Finalizing... Firmware Write successfully. Performed by 1.8.0.0 Software version. Platform: LG Selected model: M160 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM275 Reading info... Detected phone model: LG-M160 Mode: Emergency Initializing.. SW version: LGM160AT-00-V10m-EUR-XX-APR-11-2018+0 Android version: 6.0.1 Platform: msm8909 Reading partition... Detecting writing method... Trying to repeat.. Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.8.0.0 Software version. |
10-22-2019, 11:33 | #4974 (permalink) | |
Freak Poster Join Date: Oct 2010 Location: Europe
Posts: 407
Member: 1429766 Status: Offline Thanks Meter: 85 | LG M160 FRP reset done by writing custom firmware from support. Quote:
| |
10-22-2019, 13:58 | #4975 (permalink) |
No Life Poster Join Date: Dec 2010 Location: algeria
Posts: 624
Member: 1480336 Status: Offline Sonork: 100.1606959 Thanks Meter: 76 | lg g40 think v405ua Welcome to Octoplus FRP Tool v.1.8.0.0 Platform: LG Selected model: V405UA Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Searching for a phone. Please wait... Connecting... Reading info... QC HW ID: 0008B0E100310000 QC CPU: Snapdragon 845 SDM845 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Chip SN: DED75191 Checking request.. Reading partition... Reading info... Brand: lge Model: LM-V405 Device: judypn Android version: 9 Display ID: PKQ1.190202.001 Firmware version: 19115194909ad Resetting FRP lock.. Searching for signatures... Rebooting phone Backup saved as lge_LM-V405_22-10-2019_12-11-37.dump file FRP lock is successfully reseted! Performed by 1.8.0.0 Software version. |
10-22-2019, 14:17 | #4976 (permalink) |
No Life Poster Join Date: Aug 2014
Posts: 658
Member: 2233266 Status: Offline Thanks Meter: 252 | Welcome to Octoplus FRP Tool v.1.8.0.0 Platform: WALTON Selected model: PRIMO GM3 PLUS Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM6 Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CB00.0002.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb eMMC Flash: .15010051.4536334D.4203417E.AA3DA545 eMMC Flash: Samsung: QE63MB Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: WALTON Model: Primo GM3 plus Device: Primo_GM3_plus Android version: 8.1.0 Display ID: Primo_GM3_plus_T1620180524_V04 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as WALTON_Primo GM3 plus_22-10-2019_18-39-08.dump file Performed by 1.8.0.0 Software version. Platform: WALTON Selected model: PRIMO H6 LITE Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM5 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.4531334D.420D06A8.F0781431 eMMC Flash: Samsung: QE13MB DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: WALTON Model: Primo H6 Lite Device: Primo H6 Lite Platform: mt6580 Android version: 7.0 Display ID: NRD90M test-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as WALTON_Primo H6 Lite_22-10-2019_18-53-58.dump file Performed by 1.8.0.0 Software version. |
10-22-2019, 18:39 | #4977 (permalink) |
No Life Poster Join Date: Apr 2008 Location: South Africa
Posts: 708
Member: 746586 Status: Offline Thanks Meter: 205 | Platform: HUAWEI Selected model: DUB-LX2 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: DUB-LX2 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.8.0.0 Software version. |
10-23-2019, 08:06 | #4978 (permalink) |
Freak Poster Join Date: Aug 2019 Location: GuanGzhou-China
Posts: 412
Member: 2924041 Status: Offline Thanks Meter: 142 | Welcome to Octoplus FRP Tool v.1.8.0.0 Platform: __GENERAL RESET FRP METHODS Selected model: MTK CUSTOM Selected Download Agent: C:\Users\Mr\Desktop\Symphony_G100_MT6739_HW1_V7_20 180703\Firmware\DA_SWSEC_1804_K600AG_8.1_SYM_BD_OM _52_47.bin Selected Preloader: C:\Users\Mr\Desktop\Symphony_G100_MT6739_HW1_V7_20 180703\Firmware\preloader_k600_go.bin Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable. Searching for a phone. Please wait... Found phone on COM3 Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018/02/07.17:59_402299, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7393 Mb eMMC Flash: .88010345.50423130.304912A5.62039499 eMMC Flash: Foresee: EPB100 Internal RAM size: 256 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Symphony Model: Symphony G100 Device: G100 Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Symphony_Symphony G100_23-10-2019_13-05-10.dump file Performed by 1.8.0.0 Software version. |
10-23-2019, 08:06 | #4979 (permalink) |
Freak Poster Join Date: Aug 2019 Location: GuanGzhou-China
Posts: 412
Member: 2924041 Status: Offline Thanks Meter: 142 | Welcome to Octoplus FRP Tool v.1.8.0.0 Platform: __GENERAL RESET FRP METHODS Selected model: MTK CUSTOM Selected Download Agent: C:\Users\Mr\Desktop\Symphony_G100_MT6739_HW1_V7_20 180703\Firmware\DA_SWSEC_1804_K600AG_8.1_SYM_BD_OM _52_47.bin Selected Preloader: C:\Users\Mr\Desktop\Symphony_G100_MT6739_HW1_V7_20 180703\Firmware\preloader_k600_go.bin Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable. Searching for a phone. Please wait... Found phone on COM3 Detecting Chip Version... HW Chip: MT6739: 0699.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 03 Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018/02/07.17:59_402299, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: preloader Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7393 Mb eMMC Flash: .88010345.50423130.304912A5.62039499 eMMC Flash: Foresee: EPB100 Internal RAM size: 256 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Symphony Model: Symphony G100 Device: G100 Android version: 8.1.0 Display ID: O11019 release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Symphony_Symphony G100_23-10-2019_13-05-10.dump file Performed by 1.8.0.0 Software version. |
10-23-2019, 12:19 | #4980 (permalink) |
No Life Poster Join Date: Dec 2010 Location: algeria
Posts: 624
Member: 1480336 Status: Offline Sonork: 100.1606959 Thanks Meter: 76 | Platform: XIAOMI Selected model: REDMI NOTE 4X Please, select one of the options for "Reset Mi Account" operation or press Ok to continue... Go to "Wi-Fi Settings" and forget connected Wi-Fi network or perform Wipe Data from recovery Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM279 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000460E100000000 QC CPU: Snapdragon 625 MSM8953 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: xiaomi Model: Redmi Note 4 Device: mido Platform: msm8953 Android version: 7.0 Display ID: AL1512-mido-build-20190128095656 Firmware version: V10.2.3.0.NCFMIXM Resetting Mi Account... On Your device detected FRP Lock! Reset it? Reading MI part... Writing MI part... Resetting FRP lock.. Rebooting phone Backup saved as xiaomi_Redmi Note 4_23-10-2019_13-00-46.dump file Please power phone ON and enable "USB Debugging" then press "OK" button! If operation wasn't completed, then Your device get re-locked and credits aren't refundable! Searching for a phone (waiting for ADB device)... Please, press "OK" button on the phone to allow USB debugging.. Phone found. Reading info... Phone model: Xiaomi Redmi Note 4 SW version: NRD90M Date: Mon Jan 28 09:56:54 WIB 2019 Android version: 7.0 Baseband 953_GEN_PACK-1.148143.1.163979.1 Disabling Mi Services... Mi Account is successfully reseted! Performed by 1.8.0.0 Software versio |
Bookmarks |
Thread Tools | |
Display Modes | |
| |
|